Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

See what our Experts say about this CURT Trailer Hitch

• Does the Curt Hitch C11264 for a Nissan Maxima Come with Pin and Clip
  The Curt Class 1 Hitch # C11264 which is a fit for a 2005 Nissan Maxima I can confirm does not come with a hitch pin and clip. That said, we do sell this separately using the Pin and Clip For Class I and II Trailer Hitch Receiver Hitch part # PC2. The pin and clip is usually included with the accessory but very rarely if ever included with the trailer hitch. I have attached a list of some hitch mounted accessories you may be interested in as well below
  view full answer...
• Towing Capacity and Recommended Hitch for 2004 Nissan Altima 2.5 SL
  According to the owner's manual, your vehicle has a 1000 lb towing/100 lb tongue weight capacity. You'd need to ensure the trailer weight and tongue weight (amount of downward force exerted on the trailer ball) don't exceed those capacities. I'd recommend the Curt Class I trailer hitch, part # C11264. To complete your towing system, you'll also need the following: Hitch Pin and Clip # PC2 # 3592 ball mount Trailer wiring harness, part # C59236 1-7/8 inch trailer ball, part # 19256 or...
  view full answer...
• Will Swagman XTC-2 Bike Carrier, Part # S64670, Fit on a 2006 Nissan Altima?
  This Swagman bike carrier, part # S64670, is intended for use on vehicles that have a trailer hitch receiver installed under the rear bumper. (It is a hitch-mount type bike carrier.) If your Altima does have a hitch receiver, such as the Curt Class 1 Hitch for the 2006 Nissan Altima, part # C11264, you can use this type of rack. You can check underneath your rear bumper to see if there is a 1-1/4 inch square opening visible in the center; this would be the hitch receiver opening into...
  view full answer...
  
• Trailer Hitch and Bike Rack Recommendations for a 2004 Nissan Maxima
  For your 2004 Nissan Maxima, let us start with a hitch. The hitch offered for your vehicle is the Curt Class 1 Hitch # C11264. This is a Class I hitch with a 1-1/4 inch receiver opening. It has a towing capacity of 2,000 pounds, and a tongue weight capacity of 200 pounds. I have included a link to the installation instructions below. With this hitch installed you will be able to use the Thule T2, # TH23JV, that you are interested in. You could also use the # TH92BJ, or any rack that fits...
  view full answer...
• Will The Draw-Tite Trailer Hitch Receiver 24796 Fit a 2008 Nissan Maxima?
  Your 2008 Nissan Maxima is going to require the Curt Trailer Hitch Receiver # C11264. The Draw-Tite Sportframe Trailer Hitch Receiver # 24796 you found only fits the Nissan Maxima produced for 2009-2022. I recommend installing the 4-Way # 56022 when you install the receiver. This is the connector used on small trailers you might tow and will also allow you to use Auxiliary Lights # C53201 with any hitch mounted accessory which impairs the view of your tail lights.
  view full answer...
• Trailer Hitch for Scooter Carrier on 2003 Nissan Altima
  The only hitch available for your 2003 Nissan Altima is the Curt # C11264. This is a Class I hitch with a 1-1/4" receiver. The hitch has a max tongue weight of 200 lbs so you will need to make sure the weight of the carrier and scooter do not exceed this. You will also need to check your owner's manual to find the tongue weight of your vehicle since you will be limited by whichever is lower.
  view full answer...
• Will this Thule Bike Rack fit on my 2005 Nissan Maxima?
  The Thule Doubletrack Pro XT Bike Carrier for 1-1/4 inch and 2 inch Hitches - Hitch Mount part # TH92BJ, is compatible with your 2005 Nissan Maxima as long as you have an appropriate hitch to mount it to. We recommend the Curt Trailer Hitch for the 2005 Maxima by Nissan part # C11264, which has been rated at having an installation difficulty of 6 out of 10, and should about an hour to install for someone who is mechanically inclined, it may also be helpful if you had an extra person to...
  view full answer...
• Included Hardware and Fit of Curt Class I Trailer Hitch # C11264 on 2002 Nissan Altima
  The Curt Class I hitch you referenced, part # C11264, is indeed a fit for a 2002 Nissan Altima. You'd need a 1-7/8 inch trailer ball, part # 19256 or a 2 inch ball, part # 19258. To wire your Altima for towing, use part # C59496. If you click the provided link, you can see the installation instructions, which shows the included hardware and the tools required for installation.
  view full answer...
• Curt Hitch Installation Difficulty Versus Draw-Tite on 2007 Maxima
  I've looked over the installation instructions for the Draw-Tite # 24788 (no longer available) and the Curt # C11264. I've linked you to the installation instructions for all three hitches, and as you can see, the procedure for installing all three hitches is identical. There are differences between the hitches, however. The Draw-Tite Class I, # 24788 includes the hitch and the installation hardware only. If all you were needing the hitch for is to provide an attachment point for a bike...
  view full answer...
• Purpose of Stabilizing Straps Used with Curt Class I Receiver for 2008 Nissan Maxima
  On their Class I, II and some of their Class III receiver hitches, Curt requires the use of a stabilizing strap like part # 18050. The strap is designed to provide extra support for bike racks and other non-trailer loads, and is sold separately. The strap consists of a plastic coated steel hook on one end that would slip over the front edge of the trunk or hatch lid, and the other end would loop around the bike rack. If you click on the provided link, you can see a video that illustrates...
  view full answer...
• Trailer Hitch Recommendation for 2006 Nissan Altima 2.5S
  For your 2006 Nissan Altima we have trailer hitches available that will allow you to tow a small trailer. The Curt Class 1 Hitch # C11264 will be a great option that is confirmed as a fit. Since this is a Class I hitch you have to use the recommended ball mount part # 3592. For a 2 inch ball you would want the part # 19258 or for a 1-7/8 inch ball part # 19256. For trailer wiring you will want the # C59496 which I attached an install video that shows the harness being installed on a...
  view full answer...
• Recommended Hitch for a 2005 Nissan Altima
  I'd recommend the Curt hitch # C11264. This hitch is the only hitch available for your Altima but it does require drilling for installation. If you plan to do any towing, you will need a ball mount and a hitch ball. Depending on the rise or drop of the level height of what you will be towing, you would pick a ball mount. This small a hitch doesn't allow for an adjustable mount, so you'll have to make sure it fits a 1-1/4 receiver when you choose one. For a hitch ball, you will want...
  view full answer...
• Comparing Thule Helium, Kuat Alpha, and Swagman Titan Trailer Hitch Bike Racks, 2007 Nissan Maxima
  For the 2007 Nissan Maxima, the only trailer hitches available are class I hitches. I recommend the Curt Class 1 Hitch # C11264. I have included links to the installation details and a video showing a typical installation for you to view. Since a class I trailer hitch is what is available for your Maxima, you will need a bike rack compatible with class I hitches. Also, on class I hitches, you will be limited to carrying 2 bikes. In terms of weight, the Kuat Alpha, # B202-114, will be...
  view full answer...
• Recommended Trailer Hitch for a 2005 Nissan Altima
  There are two trailer hitch options for a 2005 Nissan Altima, the Curt Trailer Hitch Receiver part # C11264 and the Draw-Tite Sportframe Trailer Hitch Receiver part # 24788. These two options are virtually the same so it really comes down to preference but I recommend the Curt hitch since it is assembled in the USA. They both offer bolt-on installation.
  view full answer...

Do you have a question about this Trailer Hitch?