bing tracking image
  1. Trailer Hitch
  2. Acura
  3. MDX
  4. 2005
  5. CURT
FITS 2005 Acura MDX
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13328
Our Price: $223.63
Trailer Hitch
Confirmed to Fit
2005 Acura MDX

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
CURT Trailer Hitch - 13328
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full trailer hitch installation instructions. Great price MDX trailer hitch and expert service. Acura MDX, 2005 trailer hitch by CURT are available from etrailer.com. For expert service call 1-800-940-8924 to order your Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13328, or order online at etrailer.com.
  • All Info
  • Reviews (460)
  • Q & A (0)
  • Photos

2005 Acura MDX - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

  • Class III
  • 2 Inch Hitch
  • 3500
  • Concealed Cross Tube
  • 350
  • CURT
  • 5000 lbs WD GTW
  • 500 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your Acura MDX's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 350 lbs
      • Maximum TW when used with weight distribution: 500 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13328 Curt Class 3 Trailer Hitch Receiver

Installation Details 13328 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.

Tongue Weight (TW):
350 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
5,000 lbs.

Tongue Weight (TW):
500 lbs.



No drilling required Manufacturer Estimated Installation Time

Tech Tip

Some models have a fascia undercovering that must be removed. No drilling required for installation





Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13328

Average Customer Rating:  4.8 out of 5 stars   (460 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Item came damaged, had to spray paint, etrailer needs to do a better job with packaging.

Etrailer Expert

Jenny N.

5/13/2024

I am sorry that it needed to be repainted when you received it. We can get you a paint credit to help cover the cost. Watch for an email from us.



by:
2007 Honda Pilot

Great price. Easy to install. Fast ship ping

Paul

9/5/2023

Great. I love how easy it was to install.

Etrailer Expert

Mike L.

10/24/2023

@Paul Awesome, we're glad your Curt # 13328 hitch was easy to install!


by:
2006 AcuraMDX

I was able to install the hitch and wiring harness easily. The hitch came with the bolts and washers that were needed. I was even able to order the cleaning brush. They had how videos that really were helpful, watch a couple minutes and go to work. I really think etrailer is the best!
I couldn't be more happy with the ordering, shipping, and installation.

Jeffrey B.

3/19/2019

Its been a year and my trailer hitch works great I used a lot more than I thought I would. I would definitely recommend etrailer.com to my friends and family I see myself probably three to four hundred dollars doing it myself and only took me a couple hours



by:
2006 Honda Pilot

Installed this hitch on a 2006 Honda Pilot in about 40 minutes. Fit was beautiful. Nice product.
Here's a helpful hint for cleaning corroded weld nuts. Get a 1/2 " fitting brush from the plumbing dept of your local hardware store. Cut the handle off and place the brush in your cordless drill. Same principal as the battery terminal brush only much faster and easier.
I cleaned the six M12 holes first then went to the two M10 holes. Total thread cleaning time was less than ten minutes for 8 holes. All bolts spun in with my fingers when I was finished. Good luck!

Joe G.

9/21/2014

Buy this hitch from e-trailer. Product and service are second to none.



by:
2000 Honda Pilot

This will be a rather long review since I am combining the entire purchase in this one review. To start I am a 60+ yr. old female & not mechanically inclined but after getting an estimate of over $900. 00 from the local Honda dealer to install a receiver & the electrical wiring so that I could tow a small trailer I decided to shop around. I wasn't even sure of what all I would need or what the parts were called except for the ball. I visited a few websites & sent a few emails to inquire. Etrailer was the first to respond to my questions & provided links so I went back to their site. After viewing a video on the different receivers that would fit my Honda Pilot I favored the Curt receiver. That was my starting point & I moved on to the next item I would need which was the hitch. I never knew there were so many possibilities & I didn't have a clue what the rise & drop was all about so I sent another email. Within a matter of hours I'd gotten a response from a fellow named Jon G. He was just the hook-up I needed!! The links he provided answered all of questions I had & gave me the education I needed. (I was still waiting for responses from the other websites I'd sent inquiries to.) I was certain at this point that I would make my purchase with etrailer.com & proceeded filling up my shopping cart with the Curt receiver, the Curt ball mount, the chrome hitch ball, the electrical wiring & an anti-rattle hitch pin. Before I paid for the items I asked Jon G. for 1 more favor. Would he kindly view the items in my cart to make sure I had matched the items up so that each would fit correctly with the other. He did & I made the purchase. Within a few days the order arrived & I was confident enough after watching the installation video & reading other reviews that I could install everything myself. I used the lift in a friend's garage & enlisted the help of a female friend. She held the receiver up on one end while I was at the other installing the bolts. Then it was her turn. Together we had the receiver installed in less than 30 minutes. It was so easy!! Next, we installed the wiring That took close to an hour. Mainly because we were trying to be so careful when pulling back the rubber & popping out the panel clips but we got 'er done & did a beautiful job of it, if I may say so myself. All in all, it took almost 2 hours to complete but that includes disposing of cardboard boxes, putting away the tools, lowering the S-L-O-W lift & backing the vehicle out of the garage. etrailer is #1 in Customer Service & Satisfaction, Product Variety & Quality & Anything that You want to Hitch. Well, almost anything.....you can't hitch your kid....or, your dog....er, dogs. Thanks again, etrailer. You guys are BOSS!!!



by:

Its really very sturdy, needed another hand for installing. I installed it on a 2005 Honda Pilot, so needed to remove tow hook on rear driver side to install hitch. I had issues with rusted weld nut on passenger side, one is completely moved out, other two had no threads. I had to order the CURT 18-Inch Trailer Hitch Fish Wire for 1/2-Inch, to install the bolt from top and used a nut from bottom. Where the threads are completely gone, used a Irwin 12-1 25 mm bottom tap to rethread and was able install the bolts.
Primarily using this hitch to carry a 2-bike rack. Used it for a 20 mile round trip so far, everything looks great, no wobbling. Also bought a Rola 2 bike rack from etrailer.



by:
2015 Honda Pilot

I ordered a trailer hitch for my 2004 Honda pilot. It came in less then a week good packing. I watch the video on how to install this helped a lot. I installed it in about 20 minutes it fit perfect and all the right bolts. In the video it shows to clean the threads with a wire brush.
Mine wear full of rust this took me about 40 minutes to clean. I also got the wire harness for the hitch this fit great to about 15 minutes to install. All in all this was a great experience. I would highly recommend this company. I ordered all parts online this was easy to navigate all parts needed.



by:
AcuraMDX

This trailer hitch fit perfectly on my Acura MDX. Installation took me about an hour and half, mainly due to the fact I was not using a lift and lying on my back to do the install. I would definitley suggest having an extra person help with the installation. It would have been difficult if not impossible to hold the hitch in place while and bolt it on at the same time. Video instructions on etrailer made all the difference. The videos notified me of potential issues I might have during the install so that I was prepared for these and they didn't hinder the installation.

Shipping was free and extremely fast (ordered on a Wednesday and arrived the next day).

I highly recommend this hitch and etrailer.com.



by:
2003 Honda Pilot

After owning my 2003 Pilot for 12+ years and 250,000 miles, decided to add a hitch so I could use a bike rack. Instructions were exact and fits perfectly. Took maybe 30 min total from unpacking to tightening last bolt, and that was only because I had to clean 2 of the holes out.



by:

I would definitely recommend this product, and etrailer.com - they are fast, and very responsive. I'm a tracking geek when it comes to ordering stuff online, and you know right away that they got the order, and when it ships, then the online tracking info shows you on a map exactly where it is. But on to the product! First, the videos on this site, and customer feedback, not to mention good prices and free shipping (over $150) were driving forces in making this purchase from etrailer. I was not disappointed. The shipping was quick (I did pay a few dollars extra for 3-5 days shipping, but only because we're going away in 5 days, and wanted to make sure we had it on time - but I would imagine it would have still gotten here quickly with regular shipping). Just like the video, installing this was a snap. I borrowed a torque wrench from a friend and cleaned out the bolt holes with a wire brush the night before, and the next morning installed the hitch receiver in about 30 minutes. Definitely easier with 2 people - my son help up one side while I put a bolt in the other side, then I was good to go.

Only complaint (minor) is that there should have been extra cardboard support between the part in the center that sticks up and attaches to the bumper. It broke through the box during delivery. I was not damaged, but could have been. The actual hitch connector, although it was wrapped, probably could have had more padding, as there was a chip in the paint on the bottom... I can touch it up, so I'm not too concerned about it.

The hitch is very low profile - others I have seen are larger and more obvious. This one is barely visible below the bumper, other than where you need to connect to.



by:
2004 Honda Pilot

After making prior purchases from etrailer.com, I was certain I was making a great decision to add a tow-hitch to my 2004 Honda Pilot. After ensuring the correct fit, etrailer.com excelled in providing installation instructions that (even a novice installer) can walk through with ease. Overall, the installation took roughly 45-minutes, thanks to the video installation walk-throughs via etrailer.com. One more reason etrailer.com surpasses the competition.



by:

The box arrived with a huge hole so I was concerned. Once opened and inspected everything looked fine. The instructions were very helpful and I installed the hitch in about 45 minutes. The hitch is mostly concealed and looks great. I can’t wait to use it. I would highly recommend etrailer and the Curt product.



by:
2004 Honda Pilot

This product arrived at about 2:00 pm yesterday. I got home at 2:45 and by 3:45, the hitch was torqued to the clear specs provided in the instructions. I think it looks GREAT! Every time I pass the rear of my vehicle, I have to admire how almost invisible it is. Very easy to install if you have someone to help hold it while you start the first two bolts. This hitch will be used to tow my BBQ trailer to my events. I couldn't be happier.



by:
2007 Honda Pilot

Great quality. Easy to install. I had absolutely no problem with the installation. Plan to use it for my bike rack. Would not hesitate to recommend to anyone.



by:
2005AcuraMDX

Must buy product. Easy install with no issues towing. Hitch is affordable and worth every penny. Thanks!



by:

Perfect fit. Very happy. Installed by myself. Didn't have to remove anything. Used a 5 gallon bucket to hold in place and then mounted. 2005 Honda Pilot



by:
2008 Honda Pilot

Perfect fit. Easy install. Love the hitch! Fast shipping. The company even sent an unexpected gift with the hitch, which I was pleasantly surprised by. Great experience.



by:

easy to install perfectly functional - good match to my car...plus reasonably priced.



by:

Great hitch. Easy installation with clear instructions



by:
2016 Toyota Tundra

Excelent hitch receiver i am very satisfied with how it looks and it was very easy to install only took me about 15 minutes. Thanks etrailer



by:
Honda Pilot

Perfect fit, easily installed, and looks great! All the right parts were included, and the instructions were a great help.



by:

A good quality and I’ll buy another one for the front for my winch.



by:
2004 Honda Pilot

product arrived as promised box looked undamaged and all parts were intact took a while to prep the bolt holes in a 20 year old vehicle but after cleaning holes hitch was bolted in in under 1 hour



by:

It was pretty easy to install but I had help from my son because I don’t have a lift yet



by:
2004 Honda Pilot

Fits on my 2004 Honda Pilot like it was factory! Installation was easy after using a wire brush attached to my cordless drill to clean out the threads before trying the bolts. Even with a recently broken wrist, I was able to install it using hand tools with the help of my lovely wife in under an hour from start to clean up! The only thing I will note is the center bracket bolts were more difficult to tighten compared to the side brackets but they eventually tightened down to torque. I will also note that I didn't have to drop my exhaust. If you are careful (and use a cloth to cover the end of your muffler) you can maneuver the hitch into place without moving the exhaust. Keep in mind, however, that you will need someone to tighten the bolts on one side or at least hold one side while you tighten the other.

Jason E.

12/1/2019

A year and a half later and its still going strong!


25
460
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Parts Needed to Tow a Trailer with a 2007 Honda Pilot
    On your 2007 Honda Pilot the parts you mentioned can all be used for towing a trailer. The Curt Class III Trailer Hitch Receiver # 13328 is confirmed to fit and will work great for you. The wiring harness # C55336 is the correct part for your Pilot. However, it isn't designed to be mounted under the bumper of the vehicle. It's generally stored inside the rear compartment and then ran out of the closed rear hatch when in use. The thick rubber seal along the hatch doesn't damage the...
    view full answer...
  • Is Trailer Wiring Necessary or Difficult to Install on a 2003 Honda Pilot if Only Using a Bike Rack
    If you only plan on carrying a bike rack or another accessory, like a cargo carrier, with the trailer hitch on your 2003 Honda Pilot, you do not have to install a trailer wiring harness. However, the available wiring harnesses for your vehicle are very easy to install. If you ever plan on towing a trailer, you will need a wiring harness. The connection point is in the rear cargo area as shown in the images for trailer hitch # 13328 (installation details and a video linked below). You...
    view full answer...
  • How Much Does the Curt Hitch 13328 Weigh and How Large is the Shipping Box?
    The Curt Hitch item # 13328 weighs 36 lbs. When packaged the box weighs 38 lbs and measures 18" x 60" x 11". This is one of the widest custom fit hitches we have. Curt does not give out schematics of their hitches.
    view full answer...
  • Will Thule Passage 3 Trunk Mount Bike Rack # TH911XT Fit a 2003 Honda Accord and 2005 Honda Pilot
    The Thule Passage 3 Bike Carrier - Trunk Mount, # TH911XT, will fit your 2003 Honda Accord. However, it will not fit your 2005 Honda Pilot as there are not enough attachment points to safely secure the rack. You could install a trailer hitch on the Pilot. I recommend the Curt Trailer Hitch, # 13328. I have included a link to the installation instructions and a link to an install video. With a trailer hitch installed, you can use a hitch mounted bike rack like the SportRack 3, # SR2703.
    view full answer...
  • Difference Between the Curt and Etrailer Hitches for a 2004 Honda Pilot
    The Curt hitch for the 2004 Honda Pilot, part # 13328, and the etrailer one, part # e98851, are almost the same. As you mentioned, the finish is the only difference between them. The matte finish of the etrailer one helps to prevent scratches and corrosion, which is why it's the one I recommend. I've linked to a video installation of the Curt since they install the same and we have the video for your 2004 Pilot.
    view full answer...
  • Trailer Hitch for 2011 Acura MDX that Allows Full Sized Spare to be Kept
    For a Curt hitch confirmed to fit your 2011 Acura MDX that allows you to keep the full size spare tire you would want the part # 13354. The spare would need to get removed during the install process but can be reinstalled once the hitch is fully installed. I attached an install video for this for you to check out as well.
    view full answer...
  • Hardware for Curt Class III Trailer Hitch Receiver # 13328 to fit a 2005 Honda Pilot
    Yes, all of our hitches come with the necessary mounting hardware. This Curt Class III Trailer Hitch Receiver, part #13328, also requires a 17mm short socket, a 19mm socket, a 4-inch extension, a ratchet and a torque wrench for the installation.
    view full answer...
  • What is Difference Between Curt and Draw Tite Trailer Hitch for 2005 Honda Pilot
    Curt and Draw Tite are two different companies who make aftermarket hitches for vehicles like your 2005 Honda Pilot. Typically their hitches are somewhat similar but will have a few differences. For your vehicle the Curt part # 13328 installs a bit differently and costs a little bit less than the Draw Tite # 75599. It's also made in the USA too. The Curt states that some fascia trimming may be required to install the hitch wherease the Draw Tite does not have have that listed. For most...
    view full answer...
  • Best Trailer Hitch Option for 2008 Honda Pilot That Doesnt Involve Trimming Bumper Fascia
    When we installed the Curt # 13328 on a 2008 Honda Pilot, we didn't need to trim the bumper fascia, as shown in the video I've linked you to. If your bumper fascia is the same as shown in the video, you shouldn't need to trim anything. The Draw-Tite # 75599 has the same towing and tongue weight capacities, so it's just as strong and would work just as well as the Curt model. The Draw Tite model makes no mention whatsoever of the need for trimming the bumper fascia, which is why it would...
    view full answer...
  • Stainless Steel Locking Hitch Pin for 2-Inch Class III Curt Hitch 13328
    Curt custom-fit Class III hitch # 13328 is a confirmed fit on your 2007 Honda Pilot. I linked an installation video to guide you through the process. Tools needed are listed in the linked instructions. For a stainless steel hitch lock you can refer to the linked page. The lock you referenced # e98882 will work fine, as will the Bulldog # BD580402. Both have a center span - the inside portion - that measures 2-1/2-inches so both will be as close to a snug 'custom fit' as is possible.
    view full answer...
  • Which Curt Hitch Fits a 2007 Honda Ridgeline
    I have a Curt hitch that does fit your 2007 Honda Ridgeline but it is not the 13328. Instead it is the part # 13385 which I attached an install video for as well.
    view full answer...
  • Trailer Hitch and Wiring for a 2005 Acura MDX
    Curt trailer hitch # C13158 is designed to fit 2010 to 2014 Subaru Legacy, all models. There are different hitches designed to fit your 2005 Acura MDX. The Curt Class III hitch that will fit your 2005 Acura MDX is # 13328. I have linked a video that shows the hitch being installed on a 2005 Honda Pilot which is built on the same platform as the MDX. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4...
    view full answer...
  • Curt Class III Trailer Hitch Receiver Origin
    This Curt hitch is manufactured in Eau Claire, WI. USA and the hardware is purchased from a USA company also. If you have any further questions let me know.
    view full answer...
  • Trailer Hitch for a 2006 Acura MDX with Full Size Spare Tire
    Draw-Tite trailer hitch # 75599 only fits if the 2006 Acura MDX has the doughnut or mini spare tire, not the full sized spare. The confusion is that it also fits certain models of the Honda Pilot and on those it will fit with the full sized spare. Curt trailer hitch # 13328 will fit a 2006 Acura MDX with full size spare. I have linked a video showing a typical installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts,...
    view full answer...
  • Power Steering Cooler for a 2005 Acura MDX Touring
    That is entirely possible and your vehicle owners manual may have that information. Or the best option would be to have an Acura dealer run the VIN on your 2005 MDX and they should be able to tell you how it is equipped. The most popular power steering cooler we have is # D13212. It is 8-1/8 inches wide, 5 inches tall, and 3/4 inches deep. If space is limited then # D13200 would be a better option. It is 12-5/8 inches wide, 2-1/2 inches tall, and 3/4 inches deep. I have linked the installation...
    view full answer...
  • Trailer Hitch Recommendation for a 2005 Honda Pilot
    I would recommend either the Curt Class 3 Trailer Hitch, item # 13328, or the Draw-Tite Class 3 Trailer Hitch, item # 75599, for your 2005 Honda Pilot, these are both custom designed hitches for your vehicle. For trailer wiring I would recommend the Plug-N-Tow (TM) Vehicle Wiring Harness with 4 Pole Flat Trailer Connector, item # 43105. This harness provides up to 8 amps maximum taillight load for trailers with extra lights. Listed below are some other items you may need to complete...
    view full answer...
  • Cleaning or Tapping the Weld Nuts on a 2006 Honda Pilot to Install Curt Trailer Hitch, # 13328
    The weld nuts on your 2006 Honda Pilot could just be so compacted with grime that they appear to be thread-less. I recommend giving them another good cleaning using the lubricant like you did before, and a stiff bristle wire brush like # DW00254. You may have to do this several times. I have linked a video of this process below. If you still cannot thread the bolts in, even after a thorough cleaning, you may have to tap the holes to re-thread them and clean them out. I would use this...
    view full answer...
  • Above Ground Height of Curt Class III 13328 Trailer Receiver Hitch on 2004 Acura MDX
    I don't have that exact measurement handy, but I was able to figure it out for you. The drop measurement (distance from the underside of the frame member to the top of the receiver tube) is right at 3 inches. This measurement on the Draw-Tite # 75599 is just a little bit less at 2-1/2 inches. This means that the inside top of the Curt # 13328 would sit at about 16-1/2 inches above the ground, versus 17 inches for the Draw-Tite. I've linked you to the install instructions for each hitch.
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for 2003 Honda Pilot
    You are correct that the trailer hitches available for your 2003 Honda Pilot all have the same towing and tongue weight capacities. This hitches all carry Class III ratings, are compatible with weight distribution system, and have 2 inch x 2 inch receiver openings. These hitches have minimal differences. For example, the curt has an extra mounting bracket above the receiver opening. The Draw-Tite hitch will require the exhaust to be temporarily lowered for installation. Out of the hitches...
    view full answer...
  • Recommended Trailer Hitch for a 2002 Acura MDX
    For your 2002 Acura MDX there are a few trailer hitch options. All of them are great and would essentially be just as good as the other. So because of that I would recommend the Curt part # 13328 if it were me as it is priced the best. I attached an install video for this for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch...
    view full answer...
  • Comparing Draw-Tite and Curt Trailer Hitches for a 2003 Acura MDX
    The Curt and Draw-Tite trailer hitches for the 2003 Acura MDX will each perform well for you. I can tell you that the Draw-Tite hitches do undergo a certain amount of extra voluntary testing that other brands do not do with their hitches. The extra 2 bolts and center mounting point on the Curt hitch do not give it additional capacity. The Curt hitch # 13328 and the Draw-Tite hitch, # 75599, are each rated at 350 pounds tongue weight and 3,500 pounds gross trailer weight. Both can be used...
    view full answer...
  • Recommended Trailer Hitch for 2005 Honda Pilot
    Both Curt class III trailer hitch, part # 13328 and the Draw-Tite Hitch class III trailer hitch, part # 75599, are quality hitches. But the most popular hitch for your vehicle is the Curt hitch, part # 13328. Installation is relatively easy, even for a beginner. The Curt receiver simply bolts on to the inside of each frame rail. Both hitches require about 40 minutes of installation time. The Curt hitch does use two extra screws to attach the center bumper bracket above the receiver behind...
    view full answer...
    Image 1 for
  • Trailer Wiring for 2006 Honda Pilot 4WD to Tow Small Trailer
    As someone with a dirt bike and an SUV I can appreciate your situation but there's no safe way to carry a double motorcycle carrier on your Pilot due to it having too low of a tongue weight capacity. You'd have to look into a small trailer to do this which would require trailer wiring like the # 118336 and a ball mount. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one...
    view full answer...
  • Center Mounting Flange on Curt Trailer Hitch 13328 Not Lining Up with Holes in 2007 Honda Pilot EX
    There are a couple of possible reasons why the center mounting flange on Curt trailer hitch # 13328 is not lining up with the holes in your 2007 Honda Pilot. First, sometimes in the shipping process a hitch can flex. As long as there are no indications of stress the flange can be flexed into the correct position. The other possibility is the order in which the hardware was tightened down. If you were to change the order of how the hardware was torqued down, say starting with the center...
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee DeAnne T
Expert Research:
DeAnne T
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Zack K
Video Edited:
Zack K
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Joshua S
Video by:
Joshua S
Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924