Which Curt Hitch Fits a 2007 Honda Ridgeline

Question

Question:

Hi there, I was wondering if the Curt #13328 installed on a 2004 Honda Pilot would be compatible with a 2007 Honda Ridgeline? Thanks.

asked by: Ray

0

Expert Reply:

I have a Curt hitch that does fit your 2007 Honda Ridgeline but it is not the 13328. Instead it is the part # 13385 which I attached an install video for as well.

expert reply by: Jameson C

0

Answer 1

The owners manual will be the final authority on the towing capacities of your 2007 Honda Ridgeline. From the research I did on your vehicle it looks to have a 5,000 lb total trailer weight capacity and a 500 lb tongue weight capacity. The Curt…

view full answer...

Answer 2

You most likely have the Curt hitch part #13385 installed on your Honda Ridgeline which has a tongue weight capacity of up to 600 lbs when used with a weight distribution system. The Curt Trunnion Kit part #17300 would be a great choice as it has a…

view full answer...

Answer 3

I show that you purchased Curt Class III Hitch Receiver #13385 for your Honda Ridgeline. Thank you for your business. This hitch is indeed rated for use with a weight distribution system. In order to select a suitable weight distribution system for…

view full answer...

Answer 4

Sometimes hitches can get slightly bent during shipping and this can be fixed by bending the hitch back into place as long as the hitch only has a slight bend to it. If yours isn't lining up I can almost guarantee that is what happened. Some…

view full answer...

Answer 5

Adding the Reese Pro Round Bar Weight Distribution w Sway Control #RE94FR is a great idea! With your trailer being pretty heavy compared to your vehicle, you are likely going to experience some sway while driving. This is why it'd be smart to…

view full answer...

Answer 6

We have basically two different styles of hitches for your 2008 Honda Ridgeline. The Curt part #13385 which has a crosstube that sits higher and would not be visible and the Draw Tite part #75280 which has a crosstube that hangs a bit lower and would…

view full answer...

Answer 7

I recommend using the Curt Trailer Hitch #13385 as a replacement for the hitch you currently have on your 2009 Honda Ridgeline. I like this Curt option because it has a hidden crosstube so all you will see is the hitch receiver after it is installed.…

view full answer...

Answer 8

The trailer wiring harness options we have for a 2007 Honda Ridgeline all have built-in protection to isolate itself from the vehicle in the event of a fault. That said, the best one we offer is the T-One Vehicle Wiring Harness with 4-Pole Flat…

view full answer...

Answer 9

Whenever you are towing, the weight capacity of your towing setup is limited by the lowest rated component. When I looked up the towing weight capacity of your 2007 Honda Odyssey it looks like the max trailer weight it could tow (with just one…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Which Curt Hitch Fits a 2007 Honda Ridgeline

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching