Will Thule Passage 3 Trunk Mount Bike Rack # TH911XT Fit a 2003 Honda Accord and 2005 Honda Pilot

Question

Question:

Will the TH911XT fit my 2003 accord and my 2005 pilot? Thanks

asked by: Rick L

0

Expert Reply:

The Thule Passage 3 Bike Carrier - Trunk Mount, # TH911XT, will fit your 2003 Honda Accord. However, it will not fit your 2005 Honda Pilot as there are not enough attachment points to safely secure the rack.

You could install a trailer hitch on the Pilot. I recommend the Curt Trailer Hitch, # 13328. I have included a link to the installation instructions and a link to an install video. With a trailer hitch installed, you can use a hitch mounted bike rack like the SportRack 3, # SR2703.

expert reply by: Michael H

0

Answer 1

We haven't yet had the chance to install either the Draw-Tite #76290 or the Curt #C13421 on a 2019 Honda Passport, so those measurements aren't available to me, unfortunately. That being said, based on the photos I attached comparing the two,…

view full answer...

Answer 2

I don't have that exact measurement handy, but I was able to figure it out for you. The drop measurement (distance from the underside of the frame member to the top of the receiver tube) is right at 3 inches. This measurement on the Draw-Tite…

view full answer...

Answer 3

The etrailer hitch #e98851 that you referenced fits the following vehicles: 2001 - 2006 Acura MDX 2003 - 2008 Honda Pilot

view full answer...

Answer 4

The etrailer hitch item #e44AR you referenced has the same protrusion from your rear fascia as the Curt Trailer Hitch Receiver item #C13421. These hitches are manufactured by the same company and are identical except for the matte coating on the…

view full answer...

Answer 5

The difference between the 7-way harnesses available for your 2018 Honda Pilot comes down to quality and reliability. Over the years we have found the Tekonsha brand to be far more reliable than Curt so I strongly recommend the T-One Vehicle Wiring…

view full answer...

Answer 6

Installation of the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector, #CU86FR feeds through the bottom of the vehicles cargo area by removing the rubber grommet. See the attached image. I have linked an installation video of this…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...