Replaces the hitch ball for your Buyers Products combination pintle hook/ball mount. 1-7/8" Diameter ball fits RM6 and BH8 Series hitches. Provides attachment point for a standard ball coupler.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the replacement. 1 7/8 inch diameter ball with the nut for a combination pintle hitch. This replacement 1 7/8 inch tow bar is for the RM6 and BH8 series combination hitches. It does include the zinc coated hex jam nyloc nut. This is a carbon steel construction, has a nice chrome finish to it. Give you a few measurements on this.
The shank diameter is gonna be right at one and a quarter inches. The shank length is gonna be right at two and a quarter inches. The ball size again is a 1 7/8 inch diameter and the capacity, which is stamped on the top of the ball is 12,000 pounds. And again, it comes with the lock nut. But that should do it for the review on the replacement 1 7/8 inch diameter ball with the nut for combination pintle hitch..
Average Customer Rating: 4.8 out of 5 stars (77 Customer Reviews)
Replaces the hitch ball for your Buyers Products combination pintle hook/ball mount. 1-7/8" Diameter ball fits RM6 and BH8 Series hitches. Provides attachment point for a standard ball coupler.I have a UTV I purchased with an unbranded pinto hitch. It came with a 2” ball, however, I have trailers that utilized 1 7/8” balls. You were the only one at the time of purchase that carried a ball with the correct shank length and diameter for my pinto hitch. Thanks you for stocking this product!
Every item ordered was top notch stuff Would buy from you with out even thinking about it. Thanks again
Great Quality!
I have a UTV I purchased with an unbranded pinto hitch. It came with a 2” ball, however, I have trailers that utilized 2 5/16” balls. You were the only one at the time of purchase that carried a ball with the correct shank length and diameter for my pinto hitch. Thanks you for stocking this product!
I couldn’t find the correct tow ball at any local stores in my area. This one had the exact dimensions I needed for my pendel hitch perfectl fit
I searched all my local stores as well as everywhere online for this hitch ball, etrailer was the only one that had it. Very happy!
Arrived, installed, looks like it'll do what it needs to. (Haven't used it yet, but didn't see how it wouldn't work just fine) What else do you want?
Very knowledgeable
And friendly
Works as it should!
Had issues with delivery, ups had lost it.
Once etrailer found out they got another one in the mail asap.
Great product. Great price. Excellent shipping and tracking
Thank you for been very Responsible and trusting company I gonna keep your contact to keep ordering my stuff from you I recommend this store a hundred percent!! Thank you!!!
Perfect replacement for my BH8 Buyers hitch. Now I have a 2" ball and 2 5/16 Incase of different trailers.
A bit pricey, but it is right for the h itch.
Etrailer made it easy to locate and order this 2" ball (with 1-1/8" shank) for use with the Buyers RM6 series combination hitch. I ordered this at the same time as the hitch (which I purchased with a 2-5/16" ball).
It was the exact part ordered and fit p erfect!
Good seller. Quick shipping. Would buy from again.
replacement ball is a good quality and fitment and a fair price. The etrailer website makes finding, comparing, and purchasing easy. Stock was good and shipping reasonable, on-time and no damage.
I can not give a honest answer because I was sent incorrect ball. It was no bigger than my thump. If I tried to install it it would just slide though mounting hole.
It came quicker than expected a good snug fit and i liked it came with tork specs
they had what i needed, and were pleasant and professional to work with!
Nice ball,to bad it doesn't fit the hitch I also bought
Easy site to navigate, fast delivery with tracking updates. Exactly what I needed
truck came with 2" ball on pintle was only 10,000lb on 8 ton pintle
found this fit 1 1/8 shank and 8 ton
Great product, excellent customer service and fast shipping.
GOOD QUALITY PRODUCT
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.