Replacement Single Axle Trailer Fender for Malibu Boats Trailers - Steel - Qty 1

etrailer Trailer Fenders - HP33VR

9" Wide x 32" long x 15" tall. This sturdy steel fender is excellent for your Malibu Boats trailer. Rounded fender has a flat back to mount flush with your trailer. Easily bolt onto your trailer.

Features:

• Rounded fender covers 1 tire on your single-axle Malibu Boats trailer
  • Blocks road debris from hitting other vehicles and helps protect your trailer's cargo
• Flat mounting flange on inner edge lets you mount fender flush with your trailer
  • Close fit keeps dirt from building up between the fender and trailer
• 1" Wide outer edge is rounded
• Sturdy steel construction
  • Prime and paint the fender to get corrosion protection and to match your trailer's finish
• Bolt-on installation
  • Fender holes accepts mounting bracket (not included)
• Made in the USA

Specs:

• Application: single-axle Malibu Boats trailers
• Dimensions: 32" long x 9" wide x 15" tall
• Quantity: 1 fender
• Weight: 8 lbs
• 1-Year limited warranty

Tips for Replacing and Installing Trailer Fenders

• Do your best to match the dimensions of the new fender to your old one.
  • If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
• As with all trailer maintenance, don't forget to chock your wheels before getting started.
• For a bolt-on fender, use your existing mounting hardware, if possible.
  • The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
• If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
• Don't forget to prime and paint the new fender to keep it from rusting (and to match your trailer's finish).
• Before you start drilling, position the fender where you need it and center it over your wheel well.
  • Mark where you need to drill (measure twice, drill once).
• Don't tighten down the mounting hardware completely until you're sure the fender is mounted correctly.

MFS00426 Single Axle Trailer Fender - 90-Degree Back - Steel - Quantity 1