12" x 2" Black-painted driver's-side and passenger's-side drum brake assemblies feature a single-plunger design. Fit most 14-1/2", 15" and 16" wheels.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Titan Hydraulic Brake Kit. The hydraulic drum brake assemblies are designed for use with a surge type trailer brake actuator. These are Uni-Servo brake assemblies, so that mean that it has one wheel cylinder with a single piston that actually pushes out against the brake pads to create wedge effect inside the brake drum.Also the Uni-Servo design delivers around 20% braking when in reverse. The pads are fully bonded to the shoes, not riveted, for longer life and more braking to work. Here on the back side, this is the back plate, it has a steel construction to it and then a black painted finish. Also down here, this is your adjuster plug.
This is included. It covers the access hole to keep dirt and grime out of the assembly and off of the shoes.Both assemblies are included, one for the driver's side and one for the passenger side. Mounting bolts and hardware are sold separately. This down here is the .. gear knob that you use to make your adjustments as needed.
When it comes to the measurements, when we measure the diameter, that's measured from the edge of one pad to the edge of the other. So if we place a ruler on there and go straight across, we can see that that measures 12 inches. Then the width is actually to the pad width. So this pad right here, edge to edge, is two inches wide.This kit's designed to fit wheel sizes 14 1/2 inches, 15 inches, or 16 inches. The mounting phalange bolt pattern, this is a five bolt design and then the center hole diameter is three and one quarter inches.
This kit's designed for axles with a rating up to 6000 pounds.That's going to do it for today's look at the Titan Hydraulic Brake Kit.
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
12" x 2" Black-painted driver's-side and passenger's-side drum brake assemblies feature a single-plunger design. Fit most 14-1/2", 15" and 16" wheels.Just what is needed. Good specs listed to make my choice easy. Will use trailer for anything 8 need in the future.
Price was right easy install. Just what we were looking for
good service and product
perfect product and price
Do you have a question about this Trailer Brake?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.