Trailer Axle Beam with Easy Grease Spindles - 89" Long - 6,000 lbs
(172 reviews)
Price: $248.68
In Stock
Trailer Axle Beam with Easy Grease Spindles - 89" Long - 6,000 lbs
Item # e23GR
Our Price: $248.68
In Stock
- All Info
- Reviews (172)
- Q & A (0)
- Photos
etrailer Trailer Axles - e23GR
- 6000 lbs
- 89 Inch Long
- 74 Inch Long
- Spindles Only
- No Drop or Lift
- Leaf Spring Suspension
- No Hubs
- etrailer
- Easy Lube Spindles
Round trailer axle beam measures 89" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 74" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).
Features:
- Round axle beam acts as part of your trailer's suspension system
- Replace an axle on your trailer
- Fabricate a suspension to fit your application
- High-strength steel construction
- Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
- Best for straight-line acceleration and steady, controlled towing
- Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
- Low ride height makes it easier to load and unload your trailer
- Straight, Easy Grease spindles - no drop
- Patented welding process prevents spindle failure with 40% stronger welds
- Built-in grease zerk for simple lubrication
- Spring seats and spindles are welded on
- CSA, QAI, and SAE-N certified
- Lifetime technical support from the experts at etrailer.com
- Made in the USA
Specs:
- Weight capacity: 6,000 lbs
- Hub-face-to-hub-face length: 89"
- Spring-center-to-spring-center length: 74"
- Axle diameter: 3"
- Spindle/hub compatibility:
- Bearings: 25580 inner, 15123 outer
- Seal: GS2250-DL, inner diameter 2.25"
- Limited lifetime warranty
Axle Dimensions
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
etrailer Axles
etrailer axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
e23GR etrailer by AxleTek Replacement Axle Beam - Easy Grease - 89" Hub Face - 74" Spring Center - 6,000 lbs
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Trailer Axle Beam with Easy Grease Spindles - 89" Long - 6,000 lbs - e23GR
Average Customer Rating: 4.7 out of 5 stars (172 Customer Reviews)
Round trailer axle beam measures 89" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 74" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).by: John04/26/2024
Replaced the old axles with these on my 7x16’ equipment trailer, been nothing but amazing since I’ve installed them. Hauled thousands of pounds since and with minor greasing and normal maintenance they’ve been great.
by: Kevin 01/21/2023
by: Michael 10/29/2021
Just glad it was in stock
by: Kelly 08/21/2022
by: Albert10/17/2022
by: Jason05/30/2023
The axles that I ordered last year are still working out great. But even better than the parts was the service I got from etrailer. It was so great working with a company who took the time to listen to my project and help me get the right parts I needed, especially coming right off the heels of a terrible experience dealing with bad information and wrong parts from a competitor. Even with some damages in shipping, the returns/ and replacements were no hassle, with most issues being quickly resolved and not even costing me any additional downtime. As a contractor keeping a small fleet rolling, your competency and professionalism have made me a customer for life!! You guys at etrailer will be my first stop for trailer parts.
by: 11/30/2023
Welds looked good however the assembler failed to rotationally align the weld on spindle/brake mounts properly. One was about 3 degrees off and the other side was an 9.5 degrees from the 12 oclock position. Not sure about the thickness of the tube. Kind of strange to look at when the top of the brake system is not at 12 oclock. Found this after I removed the spring pads on this 2.1 degree camber axle so I had to jig the tube to fine zero toe to locate the new pads as the 2.1 camber tube changes wheel alignment depending on the bend/ springpad relationship. Not sure the AVG JOE is going to be able to move the spring pads when the brake mounts can't be used as a reliable ref point. If the toe is off from improper pad rotational location. the trailer will eat tires at best or worse cause a loss of controlled tracking and someone could get get killed.
by: Mark04/16/2023
So far performing well. Have not been able to use trailer yet as much as I wanted to, don't use the grease nipples. Its easy to regrease without.
by: Gina10/19/2023
Everything is working perfect with that replacement axle. I have definitely put it to the test a lot of miles with a lot of weight. Very highly recommended.
by: Josh03/08/2024
I haven’t installed the axle yet, but it looks to be pretty solid. Time will tell. Irrelevant to the axle, but I have to touch up some paint where UPS dropped it down on my concrete. Not a big deal though. It’s going to get beat up by road debris anyway.
by: Tom 11/17/2022
Very easy installation. Everything fit perfect.
by: Patrick 04/16/2024
Always hair free when I buy from ev tra iler
by: Terry07/11/2023
Axle arrived fast, was exactly what I ordered and needed. Install went well with no problems.
by: Bob W02/08/2024
The mounts were 1/2 inch closer than advertised. I was able to persuade the springs inward to compensate. Good price and fast shipping.
by: Ralph03/07/2024
Received. Cannot use till all parts come
by: David 09/28/2023
The axle was exactly what I ordered and showed up much quicker than I expected. I installed it in about an hour. Good quality. Having the wire for the brakes already ran inside the axle made it very easy to rewrite the brakes, nice feature.
by: Douglas 07/10/2023
Worked great on my trailer.
It is a older trailer and I needed to move the anchor points on the axel but that was not difficult to have done.
Axel works great.
I love the easy grease feature.
by: Lester04/10/2024
The box carrying the axle was empty. You might want to protect the ends of the tube better so it doesn’t fall out during delivery.
by: Jerry 07/16/2023
Direct replacement for my rusted out axles on my car trailer, perfect fit, awesome quick shipping thanks etrailer
by: Isabel 04/19/2024
Product came quick and in perfect shape! Will order more from this company!
by: Robert 02/20/2024
Perfect fit shipped in great shape. No problems at all after a year running.
by: George04/07/2024
Axle showed up in few days, wrapped well. Happy with
by: David 04/13/2024
Very Fast Shipping, a very well made ax le
by: Rodney03/21/2023
I needed to replace my 3500lb drop axle. etrailer.com website is easy to navigate. I found a new axle, the price was reasonable, free shipping, it arrived in a few days and fit perfectly. I’m totally happy with the axle and the service I received from etrailer. I will definitely use them again.
by: Ronald 02/22/2024
the customer service is great
25
170
Show More Reviews
See what our Experts say about this etrailer Trailer Axles
- Can 89 Inch Axles With 74 Inch Spring Centers Fit 74-1/2 Inch Spring CenterYou'll be perfectly fine going with a 74 inch spring center to spring center axle with 74-1/2 inch spring center. That said we don't have 64 inch hub face to hub face axles with 74 inch spring centers, only 89 inch hub face to hub face and 74 inch spring centers. There are a few different options depending on the axle capacity you need: - 3,500 lbs: Trailer Axle Beam with Easy Grease Spindles # e38GR - 5,200 lbs: Trailer Axle Beam with Easy Grease Spindles # e55GR - 6,000 lbs: Trailer...
view full answer... - What Is The Difference Between 5,200lb Axle e55gr and 6,000lb Axle e23gr?Sure is! The only difference between the 5,200lb axle # e55GR and 6,000lb axle # e23gr is the wall thickness of the tubing. They both use the same spindle as it's actually the outer bearing and race in the hub that give extra strength and not the spindle diameter themselves. Since both of these axles are the same length, and same spring seat length, I'd just go with the 6k # e23gr for some extra peace of mind. This won't increase the capacity of your trailer if you originally had 5,200lb...
view full answer... - Compatibility of Hub/Rotor, U-Bolts, Hangers, and Bearings for 6k Trailer AxleThe trailer axle components between a 5.2k and 7k trailer axle are essentially all the same so what you are wanting to do overall will work. The axle # e23GR is 3 inch in diameter so the shock kit part # RM-2460 will fit it. The hanger kit part # APS4 though is a single axle hanger kit and since the shock kit is for a tandem setup it's worth mentioning that and offering the tandem axle setup # H248. The U-bolt kit part # CE23003 does fit the axle diameter, as well as the spring seat part...
view full answer... - Wall Thickness of 6k etrailer Axle # e23GRThe wall thickness of the tubing of the 6k etrailer axle # e23GR you referenced is .16 inch.
view full answer... - Determining The Correct 6,000lb Axles, Wheels, And Tires For A Yard Trailer To provide you with the correct 6,000lb axles for your yard trailer I would need to know the following measurements from your current axles: -Hub face to hub face measurement (see picture below) -Spring center to spring center dimension (see picture below) For example the etrailer Trailer Axle Beam with Easy Grease Spindles - 89" Long - 6,000lbs # e23GR has an 89" hub face to hub face measurement and 74" spring center to spring center measurement. Once I have this information I can...
view full answer...
- Bearing and Grease Seal Sizes Needed For etrailer Trailer Axle # e23GRThe etrailer Trailer Axle Beam # e23GR will use the common bearing sizes for a 6,000lb axle with #42 Spindle. Inner Bearing # 25580 Inner Race # 25520 Outer Bearing # 15123 Outer Race # 15245 Grease Seal # GS-2250DL Grease Cap # DC250L-DCRP This axle would pair well with the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 and the etrailer Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K which come preloaded with the parts I listed above installed and bearings pre-greased...
view full answer... - How to Determine Correct 5,200 lb or 6,000 lb Axle & Equivalent 8-14.5 TireBased on the bearings you gave, that is either a 5,200 lb or 6,000 lb axle, but it's not possible for me to know specifically, that's just the capacities of the hubs that have those bearings. Realistically, to get the exact capacity you'll need to contact Dexter with the serial number. After that, to get the right 5,200 lb or 6,00 lb axle you'll need to you will need to know the dimensions of your current axle's hub face to hub face and spring center to spring center. For example, the...
view full answer... - Replacement Trailer Axle Option for 1999 Triton Boat TrailerThe best match replacement we have for your trailer is the Trailer Axle Beam with Easy Grease Spindles part # e55GR which has an 89" hub face, 74" spring center, and 5,200 lb weight capacity. The hub face is longer than what you have but only by an 1" so the wheels and tires will stick out about 1/2" more per side. The spring centers don't match up either but you can move these inward by cutting the old ones off and tack welding them where you need them. If you need a higher capacity, this...
view full answer...
Do you have a question about this Trailer Axle?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video by:
Jacob T
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Carrie F
Installed by:
Conner L
Installed by:
Michael B
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.