Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
Item # RM-152-98146-7
Our Price: $193.09
Confirmed to Fit
2010 Subaru Outback Wagon
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (251)
- Q & A (0)
- Photos
2010 Subaru Outback Wagon - Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.
Features:
- Complete wiring kit lets you connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system
- Wires towed car as a combined lighting system so that brake and turn signals travel along same wire
- Diodes prevent electrical feedback and the damage it can cause to your car's electrical components
- 7-Wire to 6-wire adapter cord allows you to run power from your RV to your towed vehicle
- Straight cord is ideal for all-terrain tow bars and other tow bars that have channel guides
- 6-Way socket wires to harness and mounts on towed car with included bracket
- Sturdy, durable construction
- Powder-coated aluminum casings protect diodes from corrosion
- Electrical cord resists water, oil and chemicals
- Silicone-injected plugs prevent corrosion
- Kit includes:
- 4 Hy-Power diodes
- Wiring harness
- 7-Way to 6-way adapter cord
- 6-Way socket with mounting bracket
- Wire connectors
- Cable ties
- 1 Ring terminal
- 3' Long plastic loom
- Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
- Limited Lifetime Warranty
Specs:
- Maximum amperage: 85 amps
- Maximum voltage: 24 volts
- Adapter cord length: 6-1/2'
- Wire gauge: 16
- Wiring harness length: 30'
Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes will be needed if you want to retain separate turn and brake signals.
Separate vs. Combined Lighting Systems
Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your vehicle will still function as designed when not hooked up to your RV.
Do You Need a Brake Light Relay?
Because this kit wires your vehicle as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
RM-152 Roadmaster Universal Hy-Power Diode Wiring Kit
RM-98146-7 Roadmaster Wiring - Straight 6 to 7 - 78" Long
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord - RM-152-98146-7
Average Customer Rating: 4.7 out of 5 stars (251 Customer Reviews)
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.by: Bill11/06/2023
The install on my Ford Maverick is clean and functional, so this is more of a customer service review... excellent customer service!
During the 4-day towing set-up install, the forecast was for freezing temps and my rig was not winterized. I called in mid panic and the motorhome was moved indoors.
A few months after using the tow set-up, a minor problem developed. I called and the CSR apologized and said, I can see how that might be frustrating, and a replacement cable (slightly longer) was sent free of charge.
by: Edward 05/16/2024
I also purchased brackets and receivers for the tow bar. Both were as advertised and are functioning very well. The staff were also very knowledgeable and helpful. Hard to find service of this kind in today’s world.
by: Phil 04/04/2024
The installation ins ructions and video were very helpful. The wiring kit worked perfectly.
by: Jason05/08/2023
Great kit. Easy to install. Connectors seem solid and wires are good.
by: James02/24/2024
The installation took some time and the instructions need to be clarified.
by: Dean 10/18/2023
Roadmaster
The Roadmaster 4 diode wiring kit has worked great for a full towing season.
Easy installation, great instructions, and added safety while towing.
The wiring kit easily integrated into the other braking and towing system components.
Thanks e-trailer!
by: Juan09/15/2021
2013 Subaru Forester
Works as expected. Connection feels solid enough. Have not had the opportunity to take it on a long trip yet.
One thing bit us in the butt, forcing us to cancel a trip at the last minute (when testing that our towed vehicle's turn signals, brake lights and supplemental brake system was working before driving off!): the left-turn signal prong in the male part of the connector (that plugs into the towed vehicle) was not opened enough, so no steady connection was being made because there was no contact between the prong and the walls of the female part. This had worked in a previous test. Picture included. Make sure to use a flathead screwdriver to open each prong up so full contact is made!
by: William 08/03/2023
This kit worked great. It was easy to install (etrailer offers installation videos if needed). I like this much better than a temporary set of lights on the towed vehicle. The cord and plug are also good quality.
by: Daniel05/02/2024
Easy install. Good directions. Works as described.
by: Steve05/27/2021
I chose the order by phone option. The website is well organized, but, I had gone too long without hearing another person. I have received several orders from etrailer after purchasing an RV last summer. I knew we would be Purchasing a Toad.
I don’t have any experience with towing another vehicle, so I had plenty of help in finding the right equipment for me.
The delivery times were all easily tracked and arrived in good condition. As md on time.
I had the simple tools required to install the base plate and hitch. The videos available on their site are clear and easy to understand.
I have had a great overall experience with etrailer.
by: Stephen B07/14/2023
I have not been disappointed with anything I have ordered from you.
This wiring kit should do the trick for my flat towing project.
I am sorry that I couldn’t get all of the pieces from you, the transmission pump and base plate was ordered from another company.
This is my fourth camper you are helping me keep maintained and improved.
2000 Cougar 5th wheel bunkhouse,2016 Sprinter 5th wheel front living room , 2021 Nexus 31t class C and a 2016 sprinter tow behind.
by: James04/10/2022
2019 GMC Acadia
Very straight forward install, easy to follow instructions. If you do this your self be prepared, the factory light wiring isn't very long or thick it was difficult to strip the wire back far enough to double it over to get a good connection. Upon completion of the wiring, I double checked all power at both plugs, it was all good, I installed the lights, brake and turnsignals worked great, I didn't have any running lights. About 3 min later they came on and stayed on. I don't believe this has any thing to do with the kit, this vehicle has all kinds of light sensors, darkness sensors, rain sensors.. etc. I believe it just too a min or 2 for the lights to actually come on.
by: Janes01/10/2024
Easy instructions and works great!!!
by: Joe H08/31/2022
See my review on the Base Plate. The electric was a little wonky but my mechanic met with the manufacturer and was able to figure it out. That said, once it was resolved, it has worked flawlessly.
by: James04/20/2022
Toyota Tacoma
I had a Toyota Tacoma that has separate blinker lights. Took a mechanic that was knowledgeable in electrical wiring. Followed the instructions and it worked perfect. Used it several times since
James J.
4/21/2023
Great. Been on several trips. No problem
by: Wayne05/17/2023
All running and signal lights work great. But no license plate light illumination.
Jenny N.
5/23/2023
You are correct in that the tow bar wiring harness part # RM-152-98146-7 will not illuminate the license plate light as the diodes are meant to keep the signals from backfeeding into your vehicle wiring. We have checked into this and having the license plate light is not mandatory when flat towing.
by: Bruce 10/04/2023
Easy to install. Would prefer a different method for securing the diodes. I used zip ties of good quality from Ty-Rap instead of the box store cheap imitations.
by: Tom F09/10/2023
2020 Jeep Wrangler
Very straightforward. I followed along to one of the videos on etrailer's site and it went very easy for me thank you etrailer!
by: Richard 02/23/2024
Works great.
by: Don 04/13/2023
Honda
Kit worked well. On 2012 Honda CRV I was able to run the wire to the rear under interior panels then install diodes inside each quarter panels eliminating any wiring or component connections exposed to the weather.
by: Beemerjohn12/27/2023
Wiring was about 8 feet short to complete the task.
by: Boyd10/03/2022
2003 Jeep TJ
1 star is simply for the fact that the straight cord is too short. Bought to use with a road master tow bar. Since I needed a drop hitch to line the tow bat up with the toad I needed about a foot more cable. Tried to make do with the one supplied. I ended up having to spend an hour in the parking lot of an rv store wiring up a new one on my first trip. You would think for [local stores] you have to pay for this they could spring for a little extra wite.
Katrina B.
10/17/2022
That is unfortunate that there was not enough wire for your application. We do carry 16 gauge bonded 4 wire, part # 16-4B-1, by the foot. You can always contact our customer service department for them to assist you in getting this wire ordered.
by: Edwin01/27/2023
It was the installation that was a issue, it works great now that I finally got it installed correctly. Had to go through 3 companies before it worked. It cost me 3 times as much, I went to a recommended installer from your site, and they hook it up but didn’t used the diodes that were provided. I took it back, and asked them to install the diodes.(the company “Fatal LLC”) charged me [XX] I kept getting feedback when the emergency lights were used, they say it’s normal for that to do that. I didn’t believe it, so I-took it to camping world, they rewired it and used a different diode don’t asked me why, but it-still didn’t work they said it would eventually work itself out, It didn’t, so I had still have the problem with the feedback when using the emergency flashers. I guess I’ll live with it. It works I guess….
by: Matt09/03/2022
I ordered base plates and the wire harness, the wire harness would not allow for brake, running, and turn signal lights, I had to omit one, the turn signals. The base plates where difficult, requires removing the front of the car. the video did not state the distance front to rear, I was a half inch to far forward and the fog light would not fit.
Jenny N.
9/20/2022
You mentioned that the harness would not allow for the brake, running and turn signal lights. For vehicles that have separate turn and brake lights, this kit will cause your brake lights to function as both brake and turn signal lights. This is perfectly fine. If you want to have both separate turn and brake signals, then you will need part # 118158 and part # RM-792 to do so.
by: Neal 04/08/2023
2023 Jeep Wrangler
Have not installed yet (DUO Brake system and wiring) from what I have seen I am impressed with all parts delivered.
tow bar Plate is more than substantial and the Tow bar is amazing.
25
251
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Tow Bar Wiring for 2018 Ford Edge SELThere is not a plug-in wiring kit available, but since there is nowhere to put magnetic lights on your 2018 Ford Edge SEL you will have to use a splice-in wiring kit. I recommend the Roadmaster 7-Wire to 6-Wire Kit # RM-152-98146-7. Please keep in mind that since your vehicle has variable voltage tail lights, two 50 ohm, 10 watt resistors will need to be purchased elsewhere for the taillight circuit to work correctly on both SEL and SE models.
view full answer... - How to Keep Battery Charged While Flat Towing a 2015 Fiat 500Great question! From what I could find in the owner's manual for a 2015 Fiat 500 (looking both at the Recreational/Flat Towing and Emergency Towing procedures) it does look like you need to keep the steering wheel unlocked while flat towing. Since this means your ignition is on, it can very well drain your battery. I'm not sure why this isn't something that is commonly known because even some of our flat towing manufacturers don't have this info on their site. I reached out to Roadmaster...
view full answer...
- Blue Ox Flat Tow Setup For A 2015 Jeep Grand CherokeeYou can absolutely do that! What you'll want, in that case, is to use the Blue Ox Base Plate Kit # BX1128 instead of the Roadmaster # RM-521440-5 base plate kit. Now you will be able to use the Blue Ox Ascent Non-Binding Tow Bar # BX4370 you mentioned as the base plates will fit all Blue Ox tow bars. If you ever wanted to use a Roadmaster tow bar, you'd just need the adapter # RM-031 or # RM-031-5. The Blue Ox Patriot 3 Radio Frequency, Portable Braking System # BRK2019 you mentioned,...
view full answer... - Tow Bar Wiring Solution for 2016 GMC AcadiaWe have tow bar lighting solutions that will work great for your 2016 GMC Acadia like the Roadmaster kit part # RM-152-98146-7 which I attached an install video for on a similar Acadia but the Blue Ox kit you mentioned does not fit an Acadia. The kit I mentioned is a diode kit that will require splicing into the taillight wiring of the vehicle. There isn't a custom made kit that fits your vehicle.
view full answer... - Flat Tow Wiring Kit Recommendation for a 2022 Jeep Grand WagoneerI recommend using the Roadmaster 4-Diode Universal Wiring Kit # RM-152-98146-7 for your 2022 Jeep Grand Wagoneer. This splices into your OEM wiring but has diodes that protect your OEM wiring from damage. Attached is an installation video of this kit on a 2021 Wrangler Unlimited for you to check out. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. If you do...
view full answer... - Wiring Harness and Braking System Recommendation for Flat Towing 2003 Chevy 2500 Behind MotorhomeI'd be happy to help with that. In addition to the tow bar and base plates he already has, he'll also need safety cables like # RM-643. For a diode wiring system that would allow him to use the existing taillights on the truck, I'd go with the Roadmaster # RM-152-98146-7. For a supplemental braking system, I prefer a portable system like the Blue Ox Patriot # BLU37TR. A portable system won't need to be permanently mounted to the vehicle, and can be moved to a different vehicle easily later...
view full answer... - Recommended Flat Towing Setup For 2017 Honda HR-V EX With Manual TransmissionI would be happy to go over everything needed to flat tow your 2018 Honda HR-V EX 4WD with the manual transmission. Starting with the base plate kit I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521570-5 which is compatible with the Roadmaster Falcon All-Terrain # RM-522. The # RM-522 is one of our most popular tow bars due to the the non-binding arms that allow you to quickly and easily unhook your vehicle even on un-even terrain. Next is tow bar wiring...
view full answer... - Differences of Roadmaster Direct Connect and Cross Bar Base Plates for 2020 Jeep Wrangler UnlimitedThe main difference between the Roadmaster direct connect base plate kit (previously known as the EZ5) # RM-521453-5 and the cross bar style base plate kit (previously known as the EZ4) # RM-521453-4 is how the tow bar attaches to the base plate. The cross bar style base plate uses a quick disconnect bar to connect the tow bar up, the direct connect uses pins and clips to mount to the tow bar. They install exactly the same, the arms are the only difference. A direct connection makes it...
view full answer... - Tow Bar Wiring Fit For 2001 Jeep CherokeeThere is a tow bar wiring kit for your 2001 Jeep Cherokee, though it does require splicing as there isn't a plug-in kit for an '01 Cherokee. The best option for this is a kit from Roadmaster: - Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7 The # RM-152-98146-7 is a diode kit which is the best way to wire a flat towed vehicle because it prevents any type of feedback, which keeps your Cherokee's electrical system safe and sound....
view full answer... - Products For Flat Towing A 2017 Smart CarThe pricing for Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-52300-5, Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs Item # RM-522, RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs Item # RM-643, and Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord Item # RM-152-98146-7 are all listed on the website under each product and are separate items. They are not available as...
view full answer... - Is Mopar Wiring Harness Required for Flat Towing 2019 Jeep Cherokee TrailhawkI was able to find the owner's manual for your 2019 Jeep Cherokee Trailhawk and it does not mention the Mopar Flat Tow Wiring Harness 68321424AB as a requirement. This is only required for certain years of the Jeep Cherokee. It sounds like you may have seen something in your owner's manual stating that you need this wiring harness. If that is the case you want to follow what the manual says or verify this with the dealer. I also recommend checking your owner's manual and reading the Recreational...
view full answer... - Parts Needed to Flat Tow 2020 Equinox Premier Ed. With LED Taillights and Active Aero ShuttersI would use the Roadmaster # RM-523193-5 Base Plate Kit for Direct-Connect. From looking at the attached instructions (Figure T) the only trimming is to a small area on the left and right of an air dam, behind the grill. You can see the shutters at the top of that figure and they do not appear to be affected. I have also attached a video demonstration of the installation. This base plate will pair perfectly with the Roadmaster # RM-520 “Falcon 2” standard tow bar rated for 6000 pounds....
view full answer... - Base Plate Kit and Flat Towing Accessories Recommended for 2021 Jeep Grand Cherokee TrailhawkThe Blue Ox # BX1143 is a fit for the Jeep Cherokee, not the Grand Cherokee so it won't work for your vehicle. For your 2021 Grand Cherokee, you'll want to use # BX1128, which Blue Ox confirms will fit your vehicle. Blue Ox states that this base plate kit only works with motorhome mount tow bars, as opposed to vehicle mounted models that use a trailer coupler and attach to a trailer ball on the motorhome. The Blue Ox Alpha 2 tow bar, part # BX7380 would be a good choice. The tow bar includes...
view full answer... - What Flat-Towing Parts do You Recommend to Flat-Tow My 2010 Ford F-250 4x4?I went ahead and checked your owner's manual for your Ford 2010 F-250 super duty, and there are some restraints. The only way Ford recommends flat-towing your truck is if you have the 4x4 model that has an automatic or manual transmission with the manual-shift transfer case. However, Ford says not to flat-tow if you have the 4x4 model that has a manual or automatic transmission with the electronic-shift transfer case. If you have this second model, Ford says that the vehicle should not...
view full answer... - Parts Needed to Flat-Tow a 2018 Buick EnvisionIn order to flat-tow your 2018 Buick Envision with all four wheels on the ground you will need a base plate kit, tow bar, flat-tow wiring harness, safety cables, supplemental braking system, and possibly a high-low adapter. I have attached my recommendations for each of these parts below. For a base plate kit I recommend the Roadmaster EZ5 Base Plate Kit part # RM-523188-5 as it has removable arms which makes for a clean look while not in tow and it will not require a bulky crossbar. The...
view full answer... - What Flat-Tow Setup Do You Recommend for My 2021 Ford Escape? From the vehicle you entered into our fitguide, I believe you are looking for a flat-tow setup for a 2021 Ford Escape. I confirmed with the Ford owner's manual that you cannot flat-tow or dolly-tow if your vehicle is the standard gasoline model (AWD only). This is because vehicle and/or transmission damage can occur. If you have this model, Ford recommends to use a flat-backed trailer. If you have a FWD gasoline model, you will be able to dolly-tow. I recommend using the Demco Kar Kaddy...
view full answer... - Flat Tow Set Up for 2022 GMC Yukon XLGreat question, we have all that you need to flat tow your 2022 Yukon XL Denali. I will list the items then the details. Blue Ox Base Plate Kit - Removable Arms # BLU58FR. Blue Ox Avail Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10,000 lbs # BX7420. Demco SBS Stay-IN-Play DUO Supplemental Braking System - Proportional # SM99251. Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7. Deka Lead Quick-Disconnect Battery Terminal...
view full answer... - 2015 Nissan Frontier Parts Needed to Flat TowI think the Blue Ox Base Plate Kit # BX1843 is a great choice for your 2015 Nissan Frontier and will pair nicely with the Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380. The Roadmaster 4-Diode Universal Wiring Kit # RM-152-98146-7 you purchased is also an excellent choice - I really like the diodes that come with this system. This means you just need a braking system and possibly a high-low adapter to keep your tow bar level. For a braking kit I really like the Demco Stay-IN-Play DUO #...
view full answer... - How Long Does It Take A Shop To Install Roadmaster 4-Diode Harness In A 2018 Jeep Grand Cherokee?A shop that is familiar with installing towed vehicle wiring harnesses such as the Roadmaster 4-Diode Universal Wiring Kit # RM-152-98146-7 should be able to install it on your 2018 Jeep Grand Cherokee in a few hours without a problem. You will however want to reach out to the shop directly to see how long they tell you to expect the install to take, as they are the best judge of their own skill set. If you have not already picked out a shop you want to install the harness for you then...
view full answer... - Recommended Base Plate Kit for a 2009 Chevy HHR that is Compatible with a Commander 2 Tow BarThe most affordable base plate for your 2009 Chevy HHR, that is compatible with a Commander 2 Tow Bar, is going to be the Demco Tabless Base Plate Kit item # DM9519196. This tabless design gives you a factory look when you are not flat towing. This will not fit the SS model. To flat tow your HHR you will also need a wiring harness item # RM-152-98146-7 and a supplemental braking system item # BLU37TR. To use the Patriot you will need the 12 Volt Outlet Kit item # RM-9332.
view full answer... - Parts Needed to Flat Tow 2004 GMC Savana Van 2500/3500 with Roadmaster Tow BarIt sounds like you're wanting to flat-tow your 2004 GMC Savana Van (2500/3500) and if that's the case we have everything you need for this starting with the base plate kit, I recommend the Roadmaster Direct-Connect Base Plate Kit part # RM-3140-3 which uses direct connect arms or the Roadmaster Crossbar-Style Base Plate Kit part # 3140-1 which uses crossbar style arms. The direct connect style will work directly with the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar part # RM-422...
view full answer... - Recommended Tow Bar Base Plate Kit For 2020 Ford Escape HybridI have another option, but at this time there is not a base plate kit offered for your 2020 Ford Escape Hybrid that is compatible with the Demco Aluminator Tow Bar that you currently have. Instead I recommend using the Roadmaster Direct-Connect Base Plate Kit # RM39FR which is confirmed to fit your vehicle, and will install without adding an unsightly crossbar as you can see in the included picture. For a compatible tow bar I recommend the etrailer SD Non-Binding Tow Bar for Roadmaster...
view full answer...
- Can the Roadmaster Kit # RM-152-98146-7 Run Through the Side Channel of Falcon All Terrain IIThe wiring for the Roadmaster 4-Diode Universal Wiring Kit # RM-152-98146-7 that you referenced will feed through the side channel of your Falcon All-Terrain II but if you are needing more length than the 6-1/2' cord I have another solution for you. The Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 is the exact same thing except that it has a coiled cord instead of a straight one. The coiled design keeps it from dragging on the ground when you are flat towing. When...
view full answer... - Can 2008 Ford Edge Front Wheel Drive be Flat TowedI checked the owners manual of your 2008 Ford Edge and the front wheel drive versions can be flat towed. The Blue Ox base plate # BX2190 that you referenced is a fit for your vehicle and overall is the easiest to use so it's a really great choice. For a tow bar the Avail part # BX7420 is a really great choice that allows the tow vehicle to track well behind the vehicle and also is easy to use as well. For lighting we have the Roadmaster diode kit part # RM-152-98146-7 which comes with...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Zack K
Video by:
Kathleen M
Video by:
Shane H
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Rick G
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video Edited:
John S
Written by:
Shelly K
Updated by:
Hannah L
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
3/3/2023
no issues after 10K miles super happy with this product