bing tracking image
  1. Tow Bar Braking Systems
  2. Ford
  3. F-150
  4. 2006
  5. Demco
FITS 2006 Ford F-150
Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes - Proportional

Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes - Proportional

Item # SM99243
Retail:$1,872.13
Our Price: $1,329.00
You Save: $543.13
Tow Bar Braking Systems
Confirmed to Fit
2006 Ford F-150

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Demco tow bar braking systems for your 2006 Ford F-150 are available from etrailer.com. Installation instructions and reviews for your Ford tow bar braking systems. Expert service, and great tow bar braking systems prices. etrailer.com carries a complete line of Demco products. Order your Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes - Proportional part number SM99243 online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (359)
  • Q & A (0)
  • Photos

2006 Ford F-150 - Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes - Proportional

  • Proportional System
  • Air Brakes
  • Brake Systems
  • Fixed System
  • Demco
  • Power Assist Brake Compatible

Get safe, smooth braking for your towed car with this truly proportional braking system. Car slows perfectly in sync with your RV. Installs permanently so you can just plug in and go. Low-profile design keeps it out of sight and out of the way.


Features:

  • Get the safest and most even braking while flat towing
    • Uses the air pressure from your RV's brake line to apply towed car's brakes at the same time, with the same intensity
    • Applies brakes only when needed: no false braking
  • Plug in and go
    • System automatically turns on when you connect your towed car to the RV
    • Low-profile components install permanently and stay tucked out of sight
  • Monitor your towed car's braking with LED indicator on car's dash
    • Lights up when the brakes are applied
  • Avoid damage from over-braking: reactivates car's vacuum-assisted braking
  • Protect your motorhome: system meets FMVSS safety guidelines for RVs with air brakes
  • Get everything you need: includes breakaway switch, coiled air hose, and all necessary components
    • Add the wireless Coachlink (SM99945 - sold separately) to conveniently monitor the braking system from the RV cab
  • Made in the USA


Specs:

  • Application: motorhomes with air brakes
    • Can accommodate air-over-hydraulic brakes with additional 1/4" DOT air line (DM16114 - sold separately)
  • Compatible with hybrids and other cars with continuous-power-assist brakes
  • Coiled air hose length when fully stretched: 7'
  • Breakaway cable length when fully stretched: 7'
  • 5-Year warranty


air force one review

"This is the top system I recommend if you have air brakes. Quality, reliable, tried-and-true. It just always works."


Do I Need a Braking System for Flat Towing?

A braking system is a must when towing a Ford F-150 behind your motorhome. Without it, the weight of the towed car can create a safety hazard, strain your RV's brakes, and affect the warranty of both your car and motorhome. Most states legally require a supplemental braking system, so if you don't use one and you end up in an accident (which is more likely since your RV takes longer to come to a full stop), your insurance and liability headache just doubled. You also won't have any breakaway system; if there's an accidental disconnect, there's nothing to bring your car to a stop.


Pros of a Permanent System

The Air Force One is a permanent braking system, which means that it's a one-and-done. Once it's installed, there's no more setup that you have to do. When you plug in the air jumper and the power cord at the front of your Ford F-150, the system automatically turns on. Just like that, you're ready to flat tow.


While the components are installed permanently in your RV and towed car, they remain concealed and inconspicuous. None of them will interfere with normal driving, and most of the time they are invisible.


How Does the Demco Air Force One Work?

The Demco Air Force One offers truly proportional braking for the safest and most comfortable flat towing experience. Proportional braking means that when you apply the brakes in your RV, the braking system will engage the brakes of your toad (towed Ford F-150) at the same time and with the same intensity. Whether it's a gradual slow down to a red light or a sudden stop in an emergency, your toad and RV will brake together.


How does the Air Force 1 work?

To achieve this, the Air Force One ties directly into your motorhome's air brakes and uses the same air pressure that results from you pressing the brake pedal in your coach to pull down the brake pedal in your toad. The result is uniform, real-time braking that exactly mirrors your RV.


This is a huge advantage over inertia-based systems, where the braking is triggered by sensing the forward momentum of your toad. While often effective, this method creates the potential for false braking, where something as simple as rough terrain can activate the system when it's not needed. Not only does this make for a rough ride, but it can also prematurely wear down your toad's brakes over time. The Air Force One will only turn on when you need it, so you can avoid any false braking.


To deliver the pressurized air needed to activate your toad's brakes, the coach air connection assembly taps directly into your RV's air brake lines.


Demco Air Force One air tank diagram

A pressure protection valve collects air from your RV's supply air line and stores it in an air reservoir tank so that it's ready to use when you need it. This 1-way check valve ensures that your RV's air lines maintain consistent pressure so that the motorhome's brakes will not be affected by the Air Force One. It meets Federal Motor Ford F-150 Safety Standard (FMVSS) guidelines requiring that supplemental braking systems use a separate air supply and activation relay valve.


On the other side of the air tank, the service relay valve taps into the coach's metered air line. When you press the brake pedal in your RV, the same pressure that's sent to the brakes is sent to the air connection assembly through the service relay valve. The delivery relay valve then sends the pressurized air to the operating unit via the coiled jumper hose connecting the motorhome and toad.


Main unit of Air Force 1

The main operating unit, mounted under the hood of the toad, receives the air from the coach and sends it to the actuating cylinder that attaches to your Ford F-150's brake pedal. The cylinder will then pull the pedal down and apply the brakes.


Demco Air Force 1 cylinder mounted on brake pedal

With this system, the brakes are applied in the toad at the same time, with the same amount of pressure as in the motorhome. This is what makes it truly proportional.


Vacuum-Assist Braking Means Natural Braking

When you're driving, your Ford F-150 uses vacuum pressure to create the force needed to bring the car to a stop. On most Ford F-150s, this vacuum-assist function does not work when the engine is off. As a result, a lot of supplemental braking systems have to use an excessive amount of pressure to brake the toad.


The Air Force One, on the other hand, reactivates your car's vacuum-assist function by tying into its vacuum line and using the air pressure from the RV to create the needed vacuum. This way your car will brake evenly and naturally as it's being towed, so there's less risk of damage.


Installing the Air Force One

Air Force One review

"In my experience, this has the most user-friendly installation of all the permanent braking systems. The RV side of the install can be tricky though! It's a little intimidating to cut into the air lines."


The Air Force One comes in 3 main pieces: the coach air connection assembly, the operating unit, and the actuating cylinder.


Where to mount the air tank of the Air Force One

The coach air connection assembly mounts on the underside of your motorhome, wherever you can find an open, secure place for it. You'll connect it to the supply air line and the metered air line on your RV using the included tees. You'll then route an air hose to the quick-connector on the back of your motorhome.


Quick Tip: The coach air connection assembly needs to be mounted in a location where the air lines will not be exposed to direct heat sources or moving parts; in front of the rear axle is often a good location.


Quick-disconnect air valve on Air Force 1

The coiled air hose, also called a jumper, runs between the RV and the toad and connects the coach air assembly to the operating unit. You'll plug it into the quick-connects at the same time as you hook up your tow bar.


Where to mount operating unit of Air Force 1

The operating unit will typically install under your car's hood. It's designed with a low profile so you can easily find somewhere to put it. Once the unit's mounted, you'll connect the air lines and splice the wires to the breakaway switch, which you'll need to install on the front of your toad.


Air Force One actuator on brake pedal

The final piece is the actuating cylinder, the part that actually presses the brake pedal down in your towed car. It will mount permanently to the arm of the brake pedal and anchor to the firewall. Though it is permanent, it will not interfere with everyday driving. In most Ford F-150s, it is tucked up where you can't even see it.


It connects to the operating unit via an air hose you'll need to run through the firewall. In most cases, you can cut a slit in the hood release cable grommet to pass it through. Either way, you shouldn't have to do any drilling to get the air line hooked up.


There are a lot of steps to installing the Air Force One, but the truth is that there is no "easy" braking system. It's just a question of what kind is best for you. The advantage of the Air Force One is that, once it's installed, you shouldn't have to touch it again. You don't have to find a place to store it between trips or set it up each time you tow. You just connect your electrical cord and jumper hose and you'll be ready to go.


Built-In Safety Features

Air Force One braking monitor

Included with the Air Force One is an LED indicator light for safety and peace of mind. This LED, mounted in the toad (on the dash or on the back of the rearview mirror) and visible in your RV's backup camera, will light up whenever your toad is actively braking. It's a simple way to keep tabs on whether the system is working properly or if something is going wrong.


Most supplemental braking systems have a method of letting you know when they activate, but not all of them are checking if the toad is actually braking. There could be an error that causes the system to activate without actually applying the toad's brakes. Or your brake pedal might be continuously depressed when it shouldn't be. But unless you have a system that's monitoring the pedal, you won't know it until the damage is already done. This indicator, however, connects directly to a reed switch on the actuator so it only lights up when the pedal is depressed.


If there's a strong glare on your toad's windshield, the LED light strip might be hard to see. The wireless Coachlink system (SM99945 - sold separately) is a great solution to this problem; the monitor mounts right on your RV's dashboard so it's directly in view. This is a great add-on for convenience and peace of mind.


Air Force 1 Breakaway switch

The Air Force One also comes with a breakaway system. The breakaway system ensures that your car will come safely to a stop if it accidentally detaches from the RV while you are towing. A switch mounts to the front of the towed Ford F-150. This switch - which wires to the operating unit - includes a pin that connects to your RV's hitch receiver with a breakaway cable. If the car separates, the cable pulls the pin from the switch, triggering the system. A reserve air supply stored in the operating unit will apply your towed car's brakes. This system also has total coach protection built in: if there is a separation, the motorhome's air supply gets sealed off, so its brakes will continue to function as normal.


What You Need to Flat Tow

Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.


To flat tow your Ford F-150, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system.


For the RV Between the RV and Towed Car For the Towed Car
Hitch Tow bar Base plate
Wiring plug Safety cables Braking system
Wiring adapter cord Wiring kit/diodes

The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar. Hook up safety cables between the Ford F-150s to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your Ford F-150's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.



9599007 AFO115 Demco SBS (Formerly SMI) Air Force 1 Supplemental Braking System for Motorhomes with Air Brakes - Proportional

Replaces Demco SBS SM99202 and SM99243

DM9599007

Installation Details SM99243 Installation instructionsAlternate Instructions SM99243 Installation instructions

Customer Satisfaction Score:


Customer Reviews

Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes - Proportional - SM99243

Average Customer Rating:  4.8 out of 5 stars   (359 Customer Reviews)

Get safe, smooth braking for your towed car with this truly proportional braking system. Car slows perfectly in sync with your RV. Installs permanently so you can just plug in and go. Low-profile design keeps it out of sight and out of the way.

by:

I wouldn't use anything else! Once this system is installed it's literally plug-and-play. Nothing to move or install into the car, each time you tow. Just plug it into the coach's air break system and you're done. Install video from etrailer made it even easier to complete.

You do need a bit of mechanical guidance/assistance as you're connecting to both your vehicles and coaches breaking system but it has worked flawlessly for over 11,000 miles and in some pretty intense traffic.



by:
2014 Honda CR-V

AF1 is amazing so far. I did the installation by myself. I have a 2014 Honda CR-V and bought it for towing. Watching the video helped me through it. The car installation portion was pretty straight forward. The video is better than the instructions overall, but I read through the entire instructions before beginning. I was able to install the RV tank without putting the rig on a lift. Depending on how big you are and flexibility, it can be done with the RV on the ground...it just takes longer. Also, I would recommend knowing where you are going to mount your RV tank. I mounted the tank near the rear and didn’t have enough brake tube after doing the car. Picked up an extra 20 ft at Autozone or order the tube with etrailer.

The customer service center is very helpful too. Many thanks to Mariah for the outstanding assistance. Finally, I would say that if you order the brackets to mount the emergency brake away for your car, you may have to cut them down with a grinder. It is so much nicer not putting the brake buddy in the car now. Looking forward to enjoying it on trips. I drove the rig about 20 miles yesterday, and the light came on and I honestly couldn’t tell the car was back there other than looking in the video and seeing the light on the car during braking. Highly recommend this unit.

Darryl W.

7/28/2021

5.0 Product is working great! No issues. Minor adjustment to brake cable after a year. It took 5 mins.



by:

I believe the AFO is the best supplemental braking system for air brakes on the market today. Probably the most expensive also. A lot of work to install but a good system that is truly proportional and safe to use with an air brake system.

Bruce P.

12/14/2021

We have used our AFO for over 12,000 miles towing a 2018 Chevrolet Colorado. It seems to be working fine but is really hard to know for sure. It is difficult to see the LED light strip in the camera during bright daylight. When I installed the AFO, etrailer was very helpful even returning my call on a Sunday. I also added a plastic stub next to the connectors on both the RV and toad that very conveniently stores the plastic cover when the brakes are not connected so they do not get lost. I tried to contact etrailer with my simple improvement but no one seemed interested.



by:
Jeep

Works great with air brake system on my RV. Really like the plug-in and go. Moderately easy to install and had good installation instructions. Wished I had gotten the unit sooner. Tech staff were great at helping me locate main air supply on my rv. Would highly recommend. I installed unit on '23 Jeep Rubicon and 2003 40'Beaver motorhome.



by:

If you have air brakes and tow u need AF 1 I self installed and it works great nothing to remove from drivers side from brake pedal just normal hook up plug in air hose ( blue) and connect brake away cable and go only issue I had with install is my toad (Chevy Colorado) requires battery disconnect well I had my disconnect hooked to the negative post well that didn’t work , the brake system needs power to function so 1phone call to Demco! fixed it hook up batt disconnect to positive and it now works



by:
Chevrolet Equinox

I purchased this as part of a package which included; Hitch and wiring for my 2022 Equinox, Base plate, Tow Bar, brake System and connecting air hose, break away cables, LED tow lights with wiring harness, and a trickle charger to keep the Equinox battery from going dead while I was towing it behind my class A RV.
I had etrailer do the install of all the components on my car and RV. All the workmanship was excellent and done in the amount of time they said it would take. Also because they did not have a video of this equipment being put on this year and model vehicle, I gave them permission to make a video(which added a extra day and a half to the install)and the installation was free. Everything has worked perfectly and I couldn't be happier. Etrailer is my go to for anything towing and also RV parts.



by:
2012 Saturn Relay

"Out of sight, out of mind" would be the best description I could offer for the Air Force One supplemental braking system! When properly installed, it's effective as well as quick and easy to hook up. Connect the tow bar, safety cables, safety switch cable, tow plug and air line, you're done! Five minutes at most.

I did add a couple of features to my towing system:

1. Using a relay and the extra wire in the connector to the coach, I installed the LED indicator strip on the dash of the coach; no need to rely on the back-up camera to verify operation of the brake cylinder. Coaches that have a tow connector are usually equipped with a power wire to the cab for electric brakes - this wire is a good way to get the indicator signal to the front of the motorhome.

2. I used the 12 V power connection from the coach to connect a charging wire to the car battery to ensure it would not discharge; I used an auto-resetting breaker with a rating below the glass fuse in the 12 V circuit to prevent a fuse from blowing if the charge current gets to high.

In all, a great investment! I have an article I wrote on the install if anyone is interested.



by:
2024 Jeep Cherokee

I've had an Demco Stay-n-play for years....I got the AFO for my new Cherokee and so far the installation has been fairly routine. I've called Demco for Tech assistance and they've been very helpful.



by:
2016 GMC Canyon

Vehicle 2016 GMC Canyon Diesel.
Installation
of the SMI Air Force One supplementary braking system was not too difficult. The instructions from SMI were good as was the video from etrailer. The only reason that I didn't give it a 5 star is because the air cylinder installation on the brake pedal was complicated by an unusual shape of the brake pedal arm. I eventually found a solution.
Tapping into the truck's vacuum line was a little difficult but the kit included everything I needed to T into the vacuum line and install the check valves.
All in all not a bad installation, this summer we'll see how it holds up.



by:
Allegro

The Air Force one was not an easy install for me because I’m old and I don’t get around like I used to but it was not impossible. However, in my opinion, it is the best supplemental braking system for flat towing. The best part about it is my Allegro Bus came with the system already installed on the coach and once you install it on your towed vehicle you don’t have to deal with any of that to get on the road. If it takes me more than ten minutes to hook everything up and get in the coach ready to drive away then I've done something wrong.



by:

I’ve fitted it to my Jeep Wrangler then taken of and fitted to our new Jeep Grand Cherokee. Works perfectly . I had used our 53ft coach without it and in an emergency stop, was a problem stopping in the rain. Now we have had a couple of fast stops and it works great, would be without it.



by:
2023 Jeep Wrangler 4xe

Easy installation and setup.



by:

Installation was easy, compact and out of the way. Had a little problem finding controller location due to clearance. Ended up using velcro on top of the fuse box to hold the controller in place.

Randal

8/17/2023

Questionable? This year it Felt like the truck in tow was pushing me during mid to heavy braking. Pulled over a couple of times to verify pedal was being pushed down. Verified vacuum lines from your system to the brake vacuum line was tight. It acted like the vacuum assist was not working. I need to find time to ask you about this problem.

Etrailer Expert

Katrina B.

9/18/2023

So, it seems that this is going to be better diagnosed through troubleshooting with the manufacturer. I have sent you Demco's contact information and their hours of operation in a seperate email.


by:
2014 Jeep Wrangler

Excellent system. Takes a little bit to install, but worth the effort. Our toad is a 2021 Jeep Wrangler with the ecodiesel. Some of the passes that we did were 14 degree and the braking worked great!



by:

I thought this is what I really wanted for once I got into it and how complicated it was going to be.



by:

Came with everything I needed to install it. Great quality and works fantastic!

Jon M.

8/19/2023

Works great!



by:

We love our Air Force One braking system. The confidence it was done right by etrailer allows us to tow our 4x4 van without worrying about it!



by:

Wonderful product.



by:

I installed it myself, followed the eTrailer installation video. I have used it a year, works great, have put over 3000 miles on it. No issues. Struggled with using a portable brake system and decided to do it right. It was the right choice.

Jay

7/23/2022

Perfect, way better that the portable device



by:

Took some time to route the lines but the system works well



by:
2014 Jeep Wrangler

Just finished a 10,000 mile trip trailering a 2014 Jeep Wrangler with Air Force One braking system and we are very satisfied with the product. No issues or failures and once installed, it is very easy to use. We can connect and disconnect from the Air Force One and our Blue Ox towing system in 2-3 minutes.

Joe T.

5/17/2020

After a year, we are still happy with the AF One. We had one issue where it didn’t work and it turned out we let a little grime get into the air fitting. Took some time to figure it out but we cleaned with compressed air and the problem went away. Lessen learned it to keep rubber covers on the air fittings when not in use.



by:
FordF-150

Very pleased with the Air Force One braking system. I installed it myself on my Newmar Dutch Star and it works great for towing my F150.



by:

This braking system has been nearly flawless for me since installation.
Only tow coomplaints to speak of, as follows:
1. During install of the firewall screw for the acutator, the screw ended up causing a short in my vehicle. I had to spend many hours troubleshooting and Demco support was adamant it was not their products fault.
2. The actuator has gotten sticky over time and does not reset to the correct location after braking, causing the light to stay on longer than it should.



by:

Great product and easy to follow detailed instructions.



by:
2016 Jeep Wrangler

SMI Air Force One was the choice I made when we outfitted our 2016 Jeep Wrangler Unlimited last year. I can honestly say, without any hesitation,...this was the best choice ever. The installation was very straight forward. I was reluctant to cut my coaches brake lines...but the technicians at SMI were very helpful. I emailed them a picture of the brake lines that I had identified per the instructions, and wrapped a piece of colored electrical tape around the lines to identify them. The SMI techs wrote back within 20 minutes and confirmed that I had correctly chosen the correct air lines for splicing into. The fittings where a breeze to install. The system has performed flawlessly...and it works so well ---- if it weren't for a video camera view on my dash...I wouldn't even know the Jeep was back there.

When I go to hook and unhook the Jeep. I keep my components in a canvas bag. It contains my Safety cables for the tow bar, lighting umbilical, and the two SMI parts...a coiled quick connect air line, and a safety breakaway cable. The other components of the system stay in place...no lugging them around. They are totally out of sight.

If you have a coach with Air Brakes...this, in my opinion, is the best thing going. Proportional braking...directly metered by your coaches signal line. The system is robust...and includes it's own ping tank, and D.O.T. approved metering valve. I feel it's the safest...and best performing braking system built for a towed vehicle PERIOD.


25
359
Show More Reviews

See what our Experts say about this Demco Tow Bar Braking Systems

  • Replacement Motorhome Side Only Components For The Demco Air Force One SBS
    The motorhome side only kit for your Demco Air Force One Supplemental Braking System for Motor Homes with Air Brakes - Proportional # SM99243 that you're looking for is the: -Demco SBS Coach Air Kit for Air Force One Supplemental Braking System # SM99627. This kit includes the RV side only and fits all the Air Force One supplemental braking systems. Attached are a couple of videos for you to check out if you haven't already.
    view full answer...
  • Are Check Valves Still Needed With Demco Vacuum Connection Tee Fitting
    Yes, you will still need to install the check valves with the Demco Air Force One Supplemental Braking System # SM99243 or # DM26VR, even if you use the Demco Vacuum Connection Tee Fitting # DM6257. It will still require you to install the check valves, this fitting should make it easier for the install. I have added a link below to a video review for you to check out as well.
    view full answer...
  • Troubleshooting Light Indicator of SMI Air Force One that Stays on All the Time
    The switch on the actuator for the Air Force One # SM99243 is a reed switch. It detects the presence of a magnet on the inner part of the actuator. When the magnet is near the switch the light is off. If you removed the reed switch and used a magnet you could simulate the activation and determine if the problem is the switch or the actuator. You also should try moving the switch on the actuator as it may need adjustment. If possible move the switch away from the air line as much as you can.
    view full answer...
  • Can Roadmaster RM-522 Falcon All Terrain Tow Bar Handle Weight of 2021 Jeep Grand Cherokee
    The Roadmaster # RM-522 Falcon All Terrain tow bar has a capacity of 6000 lbs. From what I read online, the 2021 Grand Cherokee would weigh a maximum of about 5000 lbs. You'll want to leave about a 1000 lb cushion for safety, so unless you'll be towing your Grand Cherokee completely loaded down with gear, the # RM-522 Falcon All Terrain would be a great choice for you. If you did need a higher capacity, the Roadmaster # RM-576 Sterling Tow Bar you'd looked at would also be a great choice. You'll...
    view full answer...
  • Roadmaster Brake-Lite Relay Kit for Towed Vehicles Installation
    use the green or blue wire on the Roadmaster Brake-Lite Relay Kit for Towed Vehicles, # RM-88400 depending on if you have a push button start or not. Black wire is to the brake light signal, red wire to the fuse, white to ground. Please review the attached installation video for further information.
    view full answer...
  • Are Fittings Included with the SMI Air Force One to Install it on a 2008 Tiffin Motorhome
    The SMI Air Force One # SM99243 actually includes tees that allow you to tap into the air brake system on your 2008 Tiffin Motorhome. This kit comes with everything that you need to tap into and repair the lines that it uses. If you check out page 8 of the linked instructions and then jump down to page 11 you can see all of the specific instructions about installing this unit on your Spartan chassis.
    view full answer...
  • Wiring Recommendation for Flat Towing a 2014 Ford Flex
    That is an excellent question. There are multiple options of wiring available for flat towing any vehicle and it can be really overwhelming when doing research. A lot of it stems from wiring kits being fairly universal so when a manufacturer comes out with a fit then it can technically be installed on multiple vehicles. For your 2014 Ford Flex I recommend using the Roadmaster Flexo-Coil Wiring Kit # RM-15267 because it has the 7-Way that plugs into your motorhome but then it also has...
    view full answer...
  • Air Lines to Use for Install of Demco Air Force One Braking on 2005 Winnebago Journey 32T
    For the supply air connection the green wire you circled is correct for installing the Demco Air Force One part # SM99243 that you referenced and the black wire you circled is correct for the service brake relay valve.
    view full answer...
    Image 1 for Image 2 for
  • Replacement Breakaway Pin and Cable for Demco Air Force One
    For the replacement pin you need the Replacement Breakaway Switch Pin for Demco SBS Supplemental Braking Systems # SM99905. This will work with the breakaway on your # SM99243. For the cable you can use the Roadmaster # RM-8603. The cable that came with your Air Force One is 7' long and this extends to 8' long so you should have plenty of slack.
    view full answer...
  • Recommended Parts to Flat Tow a 2021 Jeep Wrangler Unlimited
    I would be more than happy to help you out! Here is what I recommend using for flat towing equipment on your 2021 Jeep Wrangler Unlimited Rubicon: etrailer Invisible Base Plate Kit - # e98948 etrailer SD Non-Binding Tow Bar - # e34ZR Flexo-Coil Wiring Kit - # RM-15267 Stop Light Switch Kit - # RM-751490 Brake System - Part # DM86VR for motorhome with hydraulic brakes or part # SM99243 for motorhome air brakes I really like our base plate kit and tow bar system because it looks clean once...
    view full answer...
  • Can the 2020 Chevrolet Traverse be Flat Towed
    Yes your 2020 Chevrolet can be flat towed I was able to determine this in your owner's manual. I've looked up the Blue Ox baseplates and found that you have two options depending on if you have adaptive cruise control or not. For Adaptive cruise use the Blue Ox Base Plate Kit part # BX1738 Without adaptive cruise use the Blue Ox Base Plate Kit part # BX1734 You may have some of the following components but if you do not I will give you my recommendations You will need specific to your...
    view full answer...
  • Does Blue Ox Base Plate BX1120 Fit 2005 Jeep Wrangler
    Yes, the Blue Ox Base Plate # BX1120 does fit a 2005 Jeep Wrangler, so long as you have either the standard bumper from the factory or a double tube bumper. Along with the base plates there are a number of parts you need in order to flat tow your 2005 Jeep Wrangler, including a compatible tow bar. Here is a list of all the parts you'll need: - Base Plate Kit: Blue Ox Base Plate # BX1120 - Tow Bar: Blue Ox Alpha 2 Tow Bar # BX7380 - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil...
    view full answer...
  • Parts Needed to Flat Tow a 2001 Ford F-250 Super Duty 7.3L Diesel
    I have a solution for you, but the Roadmaster BrakeMaster System # RM-9160 is not compatible with the power braking system on your 2001 Ford F-250 7.3L Diesel. Instead, I recommend using the Demco SBS Air Force One Supplemental Braking System for Motor Homes with Air Brakes # SM99243, which is one of our most popular and highest rated fixed supplemental braking systems because of the reliability and one time setup. This system offers proportional braking at the same rate as the brakes are...
    view full answer...
  • Does Blue Ox Base Plate Fit Mini Cooper S
    Yes it does! I confirmed with Blue Ox that the Blue Ox Base Plate Kit # BX1303 does in fact fit the 2005 Mini Cooper S. It does require a compatible tow bar, and for that I recommend the Blue Ox Alpha 2 Tow Bar # BX7380 for tow bar that gives you the most bang for your buck. The rest of the flat towing set up you will need for your 2005 Mini Cooper S is the following: - Roadmaster Tail Light Wiring Kit with Bulbs # RM-155 - Supplemental Braking System: Stay-IN-Play DUO Supplemental Braking...
    view full answer...
  • Recommended Parts Needed to Flat Tow a 2020 Jeep Wrangler
    I recommend going with a Demco setup because they look good and are very easy to use after the initial installation. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. Here are the parts I recommend for your 2020 Jeep Wrangler: Base Plate - # DM9519336 (plastic bumper) Base Plate - # DM9519339 (steel bumper) Dominator Tow Bar - # DM9511008 (comes with safety cables) Tow...
    view full answer...
  • Check Valve for SMI Supplemental Braking System on 2003 Jaguar X-Type
    The Replacement Check Valve # SM99909 that you referenced is designed for use with the SMI Stay-IN-Play DUO Braking System # SM99251 or the Air Force One # SM99243 and is needed on your Jaguar if you are installing either of these systems. The valve will indeed fit your vehicle. I have attached a couple diagrams taken from the installation instructions for these braking systems that you can take a look at as well.
    view full answer...
    Image 1 for Image 2 for
  • Recommended Flat Towing Components For A 2023 Jeep Cherokee Trailhawk
    To flat tow your 2023 Jeep Cherokee Trailhawk you'll need the following components: Baseplate: I recommend the Roadmaster Direct-Connect Base Plate Kit # RM-521451-5 if you don't have active air shutters. If you do then you'll want the Blue Ox Base Plate Kit # BX1143 instead. Tow Bar: If you go with the Roadmaster baseplate you'll need the etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates # e74ZR. For the Blue Ox baseplate you'll need part # e47ZR instead. These...
    view full answer...
  • Recommended Flat Towing Components For A 2024 Chevy Trax
    Hi John, Yes, we do have everything you'll need to flat tow your 2024 Chevy Trax. Baseplate: Blue Ox Base Plate Kit # BLU24UR. Tow Bar: etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. This tow bar comes with safety cables included and has an adjustable head to help keep the tow bar level between the motorhome and Trax. Tow Bar Wiring Kit: Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord # DM9523010-54. This diode kit will transfer...
    view full answer...
  • Roadmaster Parts Needed to Flat Tow 2020 Chevy Colorado Z71 2WD
    A complete flat towing setup consists of 5 primary components, Base Plate Kit, Tow Bar, Safety Cables, Indicator Lights/Tow Bar Wiring and a Supplemental Braking System. Some vehicles require multiple components within the wiring for a proper set-up. And. in some situations a high-low adapter may be needed. I have linked a help article below that walks through this process of identifying if needed and how to select the correct size. - Base Plate, Roadmaster Direct-Connect Base Plate...
    view full answer...
  • Parts Needed to Flat Tow a 2001 Saturn SC1 Coupe Behind an RV
    First, while you might not be able to find a digital copy of the manual you can find paper copies out there. One thing you might try is to find someone near you selling the same car and go look at their manual for the flat towing procedures. From what I could find you can flat tow your 2001 Saturn SC1. It is not recommended to tow it over 65 miles per hour. Additional information is available once you locate an owner's manual. To flat tow the vehicle there are 5 main parts you will need:...
    view full answer...
  • Additional Parts to Flat Tow a 2016 GMC Canyon 4WD with a Ready Brute Tow Bar
    Hopefully I can help clear things up for you. There are a lot of options. The wiring I recommend to flat tow your 2016 GMC Canyon is the diode kit # RM-15267. I like this kit because no matter what else you do it'll cover everything you might need. It installs a 6-way on the front of your truck for any additional wires you might use for a charge line kit or braking system. In addition to the lighting kit I recommend installing part # RM-766 to make it easier to disconnect the Canyon's...
    view full answer...
  • Base Plates for 2018 Chevy Equinox for use With Roadmaster Stowmaster 5000 Tow Bar
    You can use your Roadmaster Stowmaster 5000 tow bar with your 2018 Chevy Equinox, but it is not compatible with the Roadmaster EZ5 Direct-Connect Base Plate Kit # RM-523193-5; the Stowmaster requires a crossbar-style base plate, the Roadmaster EZ4 Crossbar-Style Base Plate Kit # RM-523193-4. If you already have the EZ5 base plates on your 2018 Equinox you'll need a different tow bar, with the most cost-efficient being the Roadmaster Falcon 2 Tow Bar # RM-520. To round out your flat towing...
    view full answer...
  • Is Demco Classic Base Plate for 2004 GMC Sierra 1500 Compatible with Blue Ox Alpha Tow Bar
    Yes, the Demco Classic Base Plate Kit # DM9517148 is compatible with the Blue Ox Alpha Tow Bar # BX7380 to tow your 2004 GMC Sierra 1500 Z71 when you use the Adapter for Blue Ox Tow Bars # DM9523034. Please note that a complete flat towing setup also includes vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. If you do not have all of these components then I have some recommendations for you. For wiring I recommend the Flexo-Coil Wiring Kit # RM-15267...
    view full answer...
  • Parts Needed to Flat Tow 1999 Ford Ranger 2WD
    There are a number of parts needed in order to flat tow your 1999 Ford Ranger with 2WD, which I'll list for you: - Base Plate Kit: Roadmaster Crossbar-Style Base Plate Kit # 483-1 - Tow Bar: Roadmaster Falcon Tow Bar # RM-522 - Safety Chains: RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643 - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 - Supplemental Braking System: SMI Stay-IN-Play DUO Supplemental Braking System # SM99251 OR if your motorhome...
    view full answer...
    Image 1 for


< Previous
123. . .39



Do you have a question about this Tow Bar Braking System?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Andrew S
Test Fit:
Andrew S
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Clayton O
Test Fit:
Clayton O
Employee Bradley B
Test Fit:
Bradley B
Employee John A
Test Fit:
John A
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video by:
Andrew K
Employee Michael B
Video by:
Michael B
Employee Jacob H
Video by:
Jacob H
Employee Thomas T
Video by:
Thomas T
Employee Ethan H
Video by:
Ethan H
Employee Rick G
Video by:
Rick G
Employee Jeff D
Video Edited:
Jeff D
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee John S
Video Edited:
John S
Employee Laura H
Written by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Matthew E
Updated by:
Matthew E
Employee Noah M
Updated by:
Noah M
Employee Manda E
Updated by:
Manda E
Employee Carrie F
Updated by:
Carrie F
Employee Amanda K
Updated by:
Amanda K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.