If your vehicle comes vacuum checked from the factory, this tee fitting can make installing an Air Force One or Stay-IN-Play Duo a whole lot simpler. Connects right to the brake booster sensor port so you don't have to cut into the vacuum system.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there, I'm Michael with etrailer.com. Today we're going to take a quick look at the Demco vacuum connection tee fitting. This tee fitting is going to allow you to connect directly to your factory brake booster rather than having to splice into your factory vacuum system while installing your air force one, or Stay-IN-Play DUO supplemental braking system.So with those systems, you are going to need to access your vehicle's brakes to make sure that the vehicle can slow and stop itself, especially if it comes disconnected from your RV while you're flat towing. You want to make sure that it's going to be able to apply those brakes. So you do need to connect to your vehicle's brakes somehow. This system is going to make that much easier rather than having to splice into your factory hose.
This is going to provide a lot of those fittings for you.Now this is going to be required for some newer Jeeps, Fords mostly. I also work with some GMCs and Chryslers as well. The main way to know whether this system or this tee fitting will work for you, or if you need it, is to check your brake booster, see if there's a sensor on the brake booster. If there is, there's a good chance that you're going to need this.And the reason that it's kind of vehicle specific is because you are going to remove the factory vacuum line from that brake booster and not all vehicles will allow you to do that. So the main way to check that out is to see if there is a sensor on your brake booster.
If you have it there, there's a good chance this is going to work for you. And it's really easy to get this installed as you're installing your Air Force One or Stay-IN-Play DUO.Basically you're just going to remove that fitting from your brake booster, insert that fitting into the one end here. You can see, we already have a clamp to clamp down onto that to make sure that that's a nice snug fitting. Then we're going to plug our Demco vacuum line into the smaller port here, and then our elbow fitting is going to insert right back into our brake booster grommets. So it's going to reconnect that vehicle's system, but then it's also going to splice in our Demco vacuum line there.So like I said, I wish I could give you a specific list of vehicles that will need this, but just check under your hood, see if you can find that sensor on your brake booster.
If you do have it, this is going to be an important component to make sure that your supplemental braking system is going to work while you're flat towing.So that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Average Customer Rating: 4.9 out of 5 stars (19 Customer Reviews)
If your vehicle comes vacuum checked from the factory, this tee fitting can make installing an Air Force One or Stay-IN-Play Duo a whole lot simpler. Connects right to the brake booster sensor port so you don't have to cut into the vacuum system.This vacuum Tee was constructed very well, but the hose size was larger then the hard tubing on my 2019 Ford Fiesta. I could connect the two types/sizes, but seemed a bit of a reach for a long term connection. Then to add the one-way check valve it did not fit the hose size at all. I went to my local auto store and purchased the correct sized hose for my car and it fit the provided tee. The part is very good, and I would give it 5 stars if it fit the 2019 Ford Fiesta with the proper sized hoses.
It is great. Easy to hookup. Easy to take down. Love it.
Makes job much easier.
Fast shipping and website easy to maneuver. Exact part needed for RV.
Item was delivered in a timely manner and Quinn in customer service was excellent!
Quick delivery.Easy to install without cutting into system.This completed my Air Force one installation.
Fit my 2022 bronco great!
It works.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.