Onboard portable compressor mounts on your Jeep, truck, or RV so you can pressurize air and quickly fill your tank. Perfect for inflating Class C RV tires, air tools, air lockers, and air horns. Hardware, plumbing, and electrical components included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com And today we're gonna take a look at this Viair base camp heavy duty on-board air compressor with this two gallon tank. This 150 PSI onboard air system powered by this model 400 C Chrome compressor will let you fill up virtually any vehicle tire quickly and easily. This is designed specifically for your Class C RV tires and we'll give you fast inflation rates from 70 to 80 PSI in approximately one minute. So this pre-packaged air solution is going to come with all of the necessary components that you need to install a working system. This is also going to be useful for multiple pneumatic applications, such as your air tools, air lockers blowing and cleaning tasks and even inflating recreational equipment, air horns and many others. So this compressor features this features a maximum airflow of 2.62 CFM, which will fill this included two gallon tank from zero PSI to 200 PSI in under two and a half minutes.
Of course this is going to work with your 12 volt systems and it has a maximum amp draw of 30 amps and an IP rating of 67. This also features a thermal overload protector and what that means is this is going to automatically shut off if it happens to overheat. It has a duty cycle of 33% at 100 PSI, which translates into 20 minutes of run time at 100 PSI before the compressor needs to rest for 40 minutes. Now this also includes two of these 30 foot long braided coil hoses with this quick connect right here and stud. And this is going to allow for various attachments.
So again, you're going to get two of these coil hoses and you're also going to receive storage bags to stow the coiled hoses away to keep them clean and protected when they're not in use. And so two bags for these coiled hoses. And then you're going to get this tire inflation gun with a 180 PSI digital gauge. That's going to give you precise measuring when inflating or deflating your tires. Batteries are also included to power that gauge.
Then you're gonna get this rubber tipped blow gun that's going to assist in cleaning applications. And then this 45 degree extended dually chuck, and this is included to reach those hard to reach valve stems. And then we have this 90 degree, 40 inch long twist on air hose chuck that's going to give you that extra reach. And then an illuminated dash panel gauge that's going to allow you to turn the system on or off. And it's really a nice feature that this dial has the ability to light up.
So that's also included in this kit. Now you will receive another storage bag over here. It's going to help you organize some of the extra gear that is included with this kit. And this is going to include everything that you need to install this compressor system in your vehicle, all of the hardware, the plumbing parts, the electrical components, everything that you're going to need for successful installation. And you're also going to receive instructions to go through in more depth just the features of each part of this kit and also walk you through the installation process. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Do you have a question about this Tire Inflator?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.