Bulldog Winch Light Duty On-Board Air Compressor - 130 psi - 1.3 cfm Maximum Air Flow

Video Transcript for Review of Bulldog Winch Tire Inflator - Tire Inflator - BDW46TJ

Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this Bulldog Winch light-duty on-board air compressor. Now, this is a light-duty single-cylinder compressor that'll pressurize the air on your Jeep, your truck, or your RV. This will help let you operate any air horns or air lockers. It does deliver 1.3 cubic feet per minute at 130 psi.

The leader hose on this is a quarter inch NPT steel braided leader hose. Has a check valve in it to prevent back pressure to the cylinder. This is a very easy installation. Comes with the included mounting hardware. Nice set of instructions that'll describe how this installs and how it operates.

And if you notice on the compressor, it is a two-wire connection. You can see they have a black wire, which is your ground with the eyelet on it. And then you have your red wire, which goes to your power relay, has the spade connector on it. Few specs on this, the maximum intermittent pressure is 130 psi. Weight on this compressor is only about 2.8 pounds.

And the last thing I wanna do is just give you some measurements on this. The length of it, from one end to the other is right at 5 1/2 inches long. The width portion, which the wider, widest point would be the bracket down here is 3 1/4 inches wide. And your overall height, from the bottom to the very top is right at 4 3/4 inches tall. But that should do it for the review on this Bulldog Winch light-duty on-board air compressor..