Bulldog Winch Light Duty On-Board Air Kit w/ Compressor & 1/2 Gallon Tank - 130 psi

Video Transcript for Review of Bulldog Winch Tire Inflator - 130 PSI On-Board Air Compressor and Tank - BDW96TJ

Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at this Bulldog Winch Light Duty On-Board Air Kit. This is gonna be a great option for those of you who are needing to add a little bit of air pressure to your setup, whether it's a Jeep that you're planning on going off-roading with, or a truck or an RV, this will allow you to inflate your tires as you're on the go. Even if you're away from gas station that has an air pump, that sort of thing. It's also going to allow you to operate your power lockers, your air horns, and other standard duty air tools.

Now, this is the light duty option. The single cylinder compressor is going to pressurize the air delivers about 1.3 cubic feet per minute, at 130 PSI. This half gallon tank is gonna store up to a gallon of compressed air for you. It is capable of up to 200 PSI, but because that compressor is about 1.3, you'll be about 130, most of the time when you have this filled up. This steel tank does have the black E-coating that is going to be very corrosion resistant, and you are going to have six of these quarter inch NPT inflation ports, and two of these three, eight inch NPT inflation ports, this is going to allow you to have many different installation configurations so that you can get it set up in a way that works best for your setup.

And this kit is going to be very easy to get installed, they include instructions for you on how to get everything set up. But again, it is very customizable to your system. And this does give you a six and half foot air hose, a quarter inch NPT drain cock to drain any condensation to help to prevent the tank from rusting on the inside. You are also going to get this quarter inch NPT, 145 PSI safety valve, as well as the quarter inch NPT compression fitting to get connected to your air hose there. We'll also get one quarter inch NPT plug and two of these three eighth inch NPT plugs to close off any of those ports that you don't need.

Or you also get two compressor cushion feet. You'll get the sealed pressure switch that measures 85 PSI to 105 PSI, as well as your 40 amp relay. You also get this 20 feet of power wire with the inline fuse holder. You'll get the two clamping pipes or buck connectors, four of these spade type electrical connectors, one ground ring terminal, all the hardware that you see there and with the instructions you'll also get a very detailed wiring diagram to help you get other things set up properly, get it all wired in and ready to go. So if you are looking for a light duty onboard air kit, I think this is going to do a great job for you.

We do also have other options available for you here at etrailer.com. So, if this isn't gonna quite do it for you, if you need a little higher air pressure or a larger tank, something along those lines, we do have other options. So make sure you're getting the right kit for you. That's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..