To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 60" Long - Silver - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
John: Hey guys, John here from etrailer.com, and today we're installing the Yakima JetStream Crossbar System on our 2019 Toyota Tacoma. This is a great way to add more carrying capacity to our vehicle if our truck bed is all loaded up, or maybe we don't want to add a cargo carrier to the hitch and extend the length of our vehicle. It is a great option for us.The JetStream bars come in both black or silver. So as you can see our Tacoma here is black, so the black finish looks really good. If you have a different color, silver might be better for you. We have that as well.
Our Tacoma here has a bare roof, and so we do use the clamping system for the installation. This would be the same for any other roof rack out there. I will say that the BaseLine towers, they have a little bit more of an involved installation. It's not really difficult, just a little more time consuming, but I do feel like it has a much better fit compared to other roof racks out there.One of the best features of this roof rack of the crossbars here is this rubber strip. A lot of other crossbar systems, you have to cut that to fit your accessories.
With this system, we simply remove the end cap. Then we press down the rubber strip, and our accessories slide on here so we don't have to cut any rubber strips, and it still helps cut down on that wind noise and drag.This roof rack has a 165 pound weight capacity, which should be plenty for any accessories you'll be carrying, and the BaseLine towers here, you're able to put lock cores in to match other Yakima accessories, so you're only using one key for everything. The JetStream bars are aerodynamic. As you can see, it kind of tapers here at the end, which does also help cut down on wind noise and drag compared to other models, especially the older square or round crossbar systems. Now that we've gone over some of the features, let's go ahead and install this together.To begin our install, I recommend taking all the different components and laying them out on a clean working surface just so it's easier to keep yourself organized and to find the parts when you need them.
You'll have instructions included with your BaseClip kit and with the BaseLine towers. The BaseClip part, the instructions that come with that are going to be more measurements and where you're going to put them on the roof. The BaseLine towers are going to be a little more useful for the actual install.To start off, we will remove our cover here. There are two points at the top that you pinch and you rotate it down. Then we'll pull this gray tab out which reveals the head of this bolt here.
We'll place this plastic piece in the seat till it clicks, and then we're going to install the T bolt here. We'll place it in that cavity, flip it over, and we use our tool to tighten this down. You don't want to torque this down all the way because the next step is to flip our crossbar over and install the BaseLine foot onto the crossbar.If you flip your crossbar over, you can see here there is an arrow that points one direction. That means that's the direction that the vehicle is going to face, which will be important when we adjust our feet later. But for now, let's get our foot pack on the bottom of the crossbar here. We'll slide these two black tabs and our T bolt into the T slot here underneath. And on the bottom side of the crossbar there are measurements here. If you look in your instructions, it will tell you how far apart your feet need to be spaced, and you can use this to help get you pretty much right on point.Once you have your BaseLine feet where they need to be on the crossbar, the next step is to adjust the inner bolt here. The arrow that I pointed out earlier on the crossbar, you'll refer to that to find out which of these locations is going to be considered A, B, or C, and then look in your instructions for the BaseClip to make sure you have it adjusted correctly. Once we get this in the correct position, go ahead and tighten this down until you hear three clicks from our torque wrench here. There we go.Now with the first bolt tightened down, we will take the rubber foot pack and put it on the bottom of our leg. Be sure that this opening faces towards the outside of the vehicle, and press down. You'll hear the audible clicks. Then we make sure that the indicator is lined up with the correct tick and tighten this down until we hear our torque wrench click three times. The last step before putting our crossbar on top of our vehicle is to put the end cap on our crossbar, and be sure that this tab here sits on top of the T slot and not inside of the T slot. Repeat the same process for the other feet. Make sure you're consulting your instructions for each one, and then we'll place our crossbars on top of our roof.Yakima does include some stickers and a tape measure with your roof rack kit. So I do recommend taking the stickers to mark which feet are for the front of your vehicle and which are for the back, and then you can use this to help you figure out exactly where your towers need to be. You will install the front crossbar first. So with our front crossbar already installed and where it needs to be, you measure from the front of that crossbar back to the front of your rear crossbar and then adjust it to the specs. This will be the N4 00:06:12 measurement in your instructions.Now that we have our roof rack where it needs to sit, let's open up this gray cover and then we will install the clip here. There is a slot for right under here this bracket that we slide this under till you hear it click. And then we will go and start making a few adjustments with this bolt and this bolt. This bolt here swings the arm down, so we'll just that until it's making contact with the roof, and then this bolt here will bring the clip up into the door jamb. I would like to point out, make sure that the rubber piece here at the bottom of your foot pack, there's kind of a ridge on it. Make sure that's seated properly. The first time I put this on, wasn't making sure of that and it messed up the other side where it sits. Now, it is important not to torque this down yet like you we're hearing the clicks. Just get it snug, and then we'll go over to the other side and put that clip on as well.So we went over to the passenger side and got that clip all snugged up. Now let's go ahead and torque down both of these bolts we we're first messing with. Again, you'll twist it until you hear the three clicks. We'll torque that one first and then we'll torque the lower one. Place our gray cover here. Just take these hooks, put it here at the bottom, and rotate it into place.With all of our covers in place, that completes the installation of the Yakima JetStream Crossbar System on our 2019 Toyota Tacoma. Now we're ready to toss on any accessories that we need and we're ready to hit the road.
Average Customer Rating: 4.8 out of 5 stars (131 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
Follow the instructions, and you can't go wrong on the self installation
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
Strong, Solid Bars, Super Light, and really easy to install!
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
Solid build quality and easy installation on my '21 Mazda CX-5.
Happy with the purchase. Crossbars shipped and received quickly.
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
Well packaged and on time
Roof rack parts were ordered correctly and shipped quickly.
I choose etrailer simply because they mailed to APO. I’m a AD SM, and a lot of companies don’t shop to APO. As soon as I ordered my product, I received an email as a courtesy from etrailer letting me know I had an individual that would be tracking my product every step of the way, reassuring a smooth process. Their site functionality was easy, their customer service was great. I wanted to know if they had bike racks that would fit my cross bars, I got a email right away with a suggestion and a link that would fit my needs. I’ll definitely order from etrailer if I ever need to again.
I bought a set of baseline towers and a jet stream crossbar and mounted them on the roof of my 2018 Tacoma. I have another crossbar on the back of my truck cap. This set up is perfect for carrying long items like my canoe. James at etrailer was extremely helpful in helping with the necessary parts for this configuration.
Great product fast shipping
Great! Easy to install!
Relatively easy to install on my VW Golf (etrailer videos are very helpful) and sooooo useful with my Yakima skybox. Not much road noise, so I can leave the rack on even when I am not using it.
Work exactly as they should and hold everything securely to my vehicle without interfering with the car’s normal operation. etrailer had best prices based on my research. These bars are much quieter than traditional round bars and worth the added expense.
Bought as a pkg for my 2017 Golf R with Round Bars since I had a bunch of Yakima bike racks and a canoe gunwale rack for my old Yakima set up. Installation was easy with good instructions. All measurements from the Yakima site appear to be spot on.
etrailer.com shipped these out quickly and all parts arrived without damage.
The towers are of great quality and construction. Instructions were semi-simple but as long as you read everything twice it’s easy. Great product, I’m very happy with my purchase!
Easy to install thanks to the etrailer video. I have used the rack system on many long distance trips including driving from South Carolina to Yellowstone.
Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems.
Nicole was beyond helpful!!!
We had to wait on stock a little longer than expected BUT etrailer kept me informed of the progress. Once I received the products installation was a breeze thanks to the instructional videos.
Took longer than expected to receive order but knew when order was placed it would be over a month to receive complete order.
What I was disappointed in was the installation information, much more complicated than anticipated. Would be better if instructions were provided in one language not multiple, too much text to sort through.
Just seems overly confusing, could be done a lot better.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.