Parts Needed To Install 60" JetStream Bars On A 2021 Toyota Tacoma Double Cab With Factory Rails

Question

Question:

I have a 2021 Toyota Tacoma double cab without a factory roof rack or rails. I am considering installing a pair of Yakima 60” Jetstream bars on the roof, and another pair on the Diamondback hard cover which is on the bed. I believe I need Landing Pad 6s to attach the bars to the hard cover not sure what is needed for the roof bars. Which towers/ bases or other parts would I need for this setup? Thanks.

asked by: Kevin R

0

Expert Reply:

We can definitely help set you up. To install a pair of 60" Yakima JetStream bars on your 2021 Toyota Tacoma Double Cab with factory rails, all you will need is a set of TimberLine Towers # Y33TR, and your crossbars. We have the 60" JetStream bars available in silver # Y00429 or in black # Y00426.

expert reply by: Jesse M

0

Answer 1

The Thule Sidekick #TH78GC has a minimum bar spread of 23 5/8" and a maximum bar spread of 28". The mounting width is 14 3/8" .The Front Clearance is 36" and the Front Clearance Max Bar Spread 26". If you're not fully…

view full answer...

Answer 2

To mount one crossbar to your 2021 Toyota Tacoma Double Cab I recommend the Base Line Towers #Y28TR, Round 48" Crossbar #Y8810021, Round Bar Adapter #Y03536, and Base Clip Fit Kit #Y06128 if you are mounting the crossbar on the rear of the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 7

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 8

I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR for your 2023 Toyota Tacoma with the factory tow package. You will be able to connect the wiring using the Redarc Adapter #RED99FR directly to the factory connector. We also have the…

view full answer...

Answer 9

It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, I confirmed with Rhino-Rack that you will need the Adapter Kit for Rhino-Rack RTL600 Legs - Thule Tracks - Qty 8 #RRT-FK1 if you want to use the Rhino-Rack Roof Rack #Y02-480B-NT on Thule tracks on your Leer truck cap. The reason why is because…

view full answer...

Answer 12

The Redarc Tow-Pro Liberty Brake Controller #RED24FR you were looking at is a great choice for your 2021 Toyota Tacoma due to only the control knob being visible once installed which makes it look like a factory option. To install the #RED24FR in…

view full answer...