Roof Rack for 2022 Kia Telluride With Naked Roof

Question

Question:

Need a roof rack system for a 2022 Kia Telluride

asked by: DC

0

Expert Reply:

I recommend a Yakima set up. They have quality parts and are easy to work with. You will need Crossbars # Y00426, Towers # Y28TR and baseline clips # Y06125 # Y06165.

This set up gives you 60 inch crossbars that will give you a good area to add attachments.

expert reply by: David B

0

Answer 1

Yakima has their Jetstream roof rack for your 2018 Ford F-150 Supercrew with the part numbers #Y00426, #Y28TR, and #Y06122 which I attached an install picture of on a truck with a panoramic roof just like yours.

view full answer...

Answer 2

The roof rack I recommend for a 2018 Ford F-150 (SuperCrew and SuperCab) is the Yakima JetStream Crossbar System part #Y00426, part #Y28TR, and part #Y06122 which is a personal favorite of mine. Then you can use pretty much any cargo box or basket…

view full answer...

Answer 3

The first thing you'll need is a roof rack installed on your 2020 Ford F-150 so that you can also mount kayak carriers. For that I recommend the Yakima JetStream roof rack that consists of part numbers #Y00426, #Y28TR, and #Y06122 as this is a…

view full answer...

Answer 4

The roof rack I recommend for a 2020 Chevrolet Silverado 3500 is the Yakima Jetstream Crossbar System part #Y00426, part #Y28TR, part #Y06124, and part #Y27FR. This is an excellent option and will work well with the Yakima FrontLoader Wheel Mount…

view full answer...

Answer 5

I have a solution for you, but the Yakima Q Clips are for the older Yakima roof racks and they are no longer available. You will want to go with a new roof rack system. For your 2020 Silverado 1500 crew cab with naked roof, I highly recommend going…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Roof Rack for 2022 Kia Telluride With Naked Roof

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching