Recommended Roof Rack for a 2014 Honda Civic Si Coupe

Question

Question:

Im looking for a roof rack / cargo carrier setup for a 2014 Honda civic si coupe and Im not sure where to even start

asked by: Raymond R

0

Expert Reply:

To add a roof rack to your 2014 Honda Civic Si Coupe you will want the roof rack by Yakima and it includes the following parts:

Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426

BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR

BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06125

BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06143

This roof rack attaches to the groves inside your door with custom fit clips. It does not require cutting or drilling. This set up will provide you with two aerobar crossbars that have a 165 lbs capacity.

I recommend adding the Yakima Same Key System (SKS) Lock Cores (QTY 4) item # Y07204 to help prevent theft.

To add a cargo box to your roof, I recommend the Inno Ridge Rooftop Cargo Box item # INBRA220R-BK. This cargo box has 8 cu ft of storage and can handle up to 110 lbs of gear.

I saw you were looking at the Curt Cargo Carrier item # C18110. If you are wanting to go this route then you will need the EcoHitch Hidden Trailer Hitch Receiver item # 306-X7235. This hitch is custom fit and has a 2" receiver. I have linked an installation video below.

expert reply by: Jerred H

0

Answer 1

Going with a longer crossbar does give you more space to mount roof accessories and carriers but the longer bars do tend to get in the way a little more and create a little more wind noise. So really it comes down to considering how many things you…

view full answer...

Answer 2

Yes, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers #Y06188 and #Y06189 are the same as the Yakima Baseclips 188 and 189, respectively. Both of these kits are a fit for a 2017 Honda CR-V.

view full answer...

Answer 3

Since wind noise is a priority you will definitely want aero shaped crossbars for the roof rack you install on your 2018 Honda CR-V. We have a few options but the Yakima JetStream Kit part numbers #Y00425, #Y28TR, #Y06188, and #Y06189 would be the…

view full answer...

Answer 4

I checked with Yakima and found that you will need a new set of towers and clips for your 2018 Honda CR-V. It looks like there was a generational change for the CR-V starting with the 2017 model that required a new fit for the roof rack hardware.…

view full answer...

Answer 5

For your 2019 Honda CR-V with a naked roof I recommend going with the Yakima JetStream Roof Rack. This system consists of #Y00425 for the two 50 inch JetStream Crossbars, #Y28TR for the BaseLine Towers, #Y06188 for the front Fit Kit, and #Y06189…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...