To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.
Features:
Specs:
TheThule WingBar Evo crossbars let you quickly and easily build a quiet, aerodynamic custom roof rack for your vehicle. These high-end bars look great on any vehicle, and they are perfect for those who want a quiet roof rack that can carry plenty of gear. The bars have dual rubber strips in the T-slots and pivoting endcaps that allow you to easily mount carriers and accessories. Each bar extends past the feet to maximize carrying capacity. The bars are constructed of aluminum with internal BoxBeam structures that make them extremely durable yet lightweight. The WingBars require a Thule foot pack (sold separately) to mount the rack to your roof. Some vehicles - such as those with a naked roof - may also require a vehicle-specific fit kit (sold separately).
Aerodynamic TrailEdge Design with WindDiffuser Strips
The WingBar's tapered TrailEdge shape helps reduce wind drag by separating the airflow over and under the bars so you won't see a reduction in your vehicle's gas mileage. This also dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack.
The rubber WindDiffuser strips in the T-slots have V-shaped ridges that direct air over the tops of the bars. This reduction in wind drag also helps maintain fuel efficiency and significantly reduces wind noise.
Channel-Mounted and Clamp-On Accessories
WingBar Evo crossbars have built-in T-slots with rubber strips that simply press into place. This makes them easier to install when compared with strips that have to be threaded into the channel from the end of the bar. The dual-strip design also makes accessories easier to install in the T-slots when compared with strips that have to be trimmed. Simply lift the SwingBlade endcaps open, slide your gear into the channel, and close the endcaps. These rubber strips also seal the gaps left by your accessories so that water and dirt don't get into the T-slots.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Strong, Durable Construction
The WingBar Evo crossbars are made of anodized aluminum with internal BoxBeam structures. These structures strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Installation of the WingBar Evo crossbars is quick and easy, and you don't have to do any drilling or vehicle modification. The bars have bottom channels that accommodate your Thule feet. SmartSlide sliding scales in the bottom channels let you place the feet in the proper location using the vehicle-specific measurements provided in your fit kit manual. Simply slide each scale to the measurement indicated in the fit kit manual, then slide the foot into the channel until it rests against the scale.
For applications that don't require specific measurements provided in a fit kit manual - such as a raised rail - you can center the rack after you place it on your vehicle using a tape measure. Then slide the scales against the feet to fill in the gaps in the channel.
Insert the included rubber filler strips into each channel between the outer edges of the feet and the ends of the bars, and trim the excess. These rubber strips, coupled with the sliding scales, help to keep dirt and water out of the bottom channels and help to reduce whistling.
To complete installation on your roof simply tighten a single screw inside each foot using the torque tool included with the foot pack. This single attachment point enables you to secure the crossbar to the foot and the foot to your roof simultaneously.
Average Customer Rating: 4.8 out of 5 stars (885 Customer Reviews)
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.I’ve been searching for a set of crossbars for my 2021 Crosstrek. After looking at several different companys,, I decided to go with etrailer.com and get the Thule Wingbar Evo Crossbars and Evo Raised feet. Ordering was quick and shipping was even faster! Installed them in about an hour with no issues. I love the way they look, and the construction is solid. Shout out to the staff for doing a great job and for the great communication from placing the order, confirmation, updates and shipping the order. You will not be disappointed!
So far its the best roof rack you can get today! Had no issues when driving through rugged and bumpy terrains all day.
Quick service and greet product ! I’ve wanted Thule for years and finally treated myself so I can carry my SUP. Can’t wait to load it up with a couple of boards!
53” Thule bars fit our 2021 RAV4 Hybrid! Most people appear to be using 47” bars for the 2021 RAV4 with flush roof rails, but that’s smaller than I wanted. I sometimes carry a sheet of plywood, or a kayak plus a cargo box, and wanted a wider rack for that. I had heard that upsizing to the 53” bar was potentially not possible because the mounting slots on the bottom of the bar may not accommodate the rail locations relative to the bar length. ETrailer helped me out with some dimensions, so I bought the 53” bar knowing it would be close. There is only about a quarter inch of play on either side on the rear bar, but it fit (the front bar had more play, since the towers are a bit further apart at the front).
I’m SO happy with the result! Now I can carry what I want on the rack, and have room to spare! It looks pretty good too!
I've always trusted Thule bars. I have an old Xsporter on my truck that works really well and it has held up over time. I needed to get a Thule rack for my Jeep Grand Cherokee and found that etrailer had all the parts I needed specified for my model. That was one of my favorite things about the site. No need to search around for the different parts to attached onto the factory rails. Once I received the rack and components, it was really easy to install. I pretty much watched the etrailer videos before hand.
I have the older Hullavator 897XT to haul my kayak in. With the WingBar Evo, I found I needed to get a slightly longer bolt (6-1.00 x 30), which I got from the local Ace hardware store, to attached the Hullavator support bracket to the WingBar. Once I got those bolts set up, I was on the water with the kayak the next day.
Talked to the customer service a few times and they are great friendly people. And I can understand what they are saying.
Bought the Thule Wingbar Evo 118 crossbars and Thule Evo Raised Rail footers and installed them on my 2016 RAV4. Pretty easy to install and I did watch a few videos online to make sure I was doing everything right. I like the new raised rail system from Thule as it is clamp style versus the rubber strap - both work very well, but the newer clamp system is nice because the tool you use to tighten the footings clicks when it reaches the right tightness so you don't over tighten it. I recommend these rails and the footings (Thule 710401) as the system is quiet when driving and looks good.
This was my first purchase of an expensive roof rack system. I never expected to have the problems I am. Unfortunately it’s so universal that there are gaps that are creating really bad whistling sounds. I wish I could return and get my money back.
Thule rack looks great on my Kia Telluride. The pieces took a while to get to me because they were on backorder but it's not etrailer, they were on backorder everywhere. I messed up a piece of the rubber while installing and etrailer sent me another one free of charge. Would definitely recommend etrailer.
The bars are strong and fairly quiet, especially considering that I mount them on the main cab of my pickup truck and not on top of the canopy. My biggest concern is that the rubber strip that runs the length of the bar to reduce wind noise was badly damaged when I slid my canoe up on to the bars. Given the weight of the canoe, I'm accustomed to getting one end on a bar and sliding it back into position. Given the sensitivity of the rubber, is started pulling away from the bar and shredding when sliding the gunwales over the top of the bar. I'll try to be more careful, but a roof rack needs to be more utilitarian in my humble opinion.
Favorite bar Thule makes. Super solid.
Overall solid product. The little rubber strips that fit into the top bar are relatively fragile, I installed them, pulled one out to trim about 1/8 inches of excess length and the strip deformed such that it never went back in correctly. Fortunately etrailer had replacement strips.
This was the part I needed to add Thule kayak lift to my roof rack. System costs a fortune, but all is well made and works great.
The package was shipped in its OEM box with no additional protection. As such the Thule Aero wing cross bars were both dented on one side. Not sure if I received a return or if the product was dented in shipping as there was a significant amount of packing tape on the dented side. Either way, the end caps wouldn’t fit into the dented cross bars until I cut away plastic from the end caps. For $XXX+ dollars you think that would buy more shipping protection. Unbelievable, really.
I've owned this roof rack for a year now, and it has served my purposes (carrying my kayak around on my truck) quite well. It was fairly easy to assemble, largely because the entire instruction guide was in pictures.
I have had to retighten the rack a couple of times since putting it on the roof, so I tie the kayak down to the front and back of the truck as well as to the roof rack. I suspect the ocean kayak puts a bit of lift on the roof rack resulting in the loosening.
Items arrived later than expected despite cancelling an month long order due to waiting stock on a different set up that was in stock. Once it arrived the box was all torn up and the person that delivered it just dropped it in the garage with the boxes spilling out of the bigger box. Love Thule products, etailer and the shipping supplier not so much,
These bars are light weight and easy to set up. However, the measurements in the directions were not right to fit them to my vehicle, and they were really difficult to adjust once the bars were on the roof. They seem to be snug on the roof and working well, I did a test drive yesterday at varying speeds and they are secure. They don't cause any unpleasant noise - you'd forget they were on there.
Excellent crossbars for my 2020 JLU with sky top. Quality construction and I really like the swivel end caps to allow quick access to get things channel mounted quickly.
Great product that compliments the look of my vehicle while serving a function. Initially, the product arrived missing some key parts, but the staff responded immediately to my email and took great care of me to ensure that my experience was completely satisfactory. Carol and Kelsey are truly attentive to the customer’s needs. Great job everyone!
Whisper quiet, no discernible effect on MPG, easy to use with our Thule box and racks, and looks absolutely great. Great purchase and way worth it!
Arrived on time. The product was well packaged. These crossbars are just what I was looking for and look great on my Renegade.
Two issue- 1) my old Hull-a-ports don't fit perfectly on them. Had to do a little jerry rigging. It works, no problems but it would have been nice to know.
2) without any attachment on these bars, at speeds >40 MPH (70 KPH) These things cause the most God awful scream that almost precludes opening the windows they are so loud.
I have almost always had roof rails on my vehicles. My F150 had no rails and I was nervous about clamp style rack holders given what I tend to carry on top. These have been great and I am positive I have overloaded them numerous times.
Great rack design. Fit my truck like a glove and holds two kayaks with no issues. I’m planning on installing a fish rod holder in between both kayaks.
The product quality seems great, and fit my Jeep Wrangler without having to do any drilling, or semi-permanent mounting of overly obtrusive cage type rack system. Tried mounting my Kayak on top and it seems like it's going to work for what I wanted it for. I especially like the fact that I can easily take the whole system off with ease as I would typically leave it on only in the summer.
Great looking product. Fits very well on the car and the bars are actually pretty quiet. It is somewhat a pain to mount and dismount so plan on 30-45 minutes at least. In my opinion, if you put them on leave them there for the season as it is not very friendly to mount or dismount.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.