To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Aerodynamic, aluminum crossbar lets you build an aftermarket roof rack for your vehicle. Full-length bar provides plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Includes theft-deterring plastic locks.
Features:
Specs:
This low-profile, aerodynamic Vortex Aero crossbar lets you replace a damaged bar, add a third bar to an existing rack, or build a stylish aftermarket roof rack from scratch. The crossbar requires a pair of Rhino-Rack legs (manufactured in 2014 or later) and a custom fit kit to mount it to your roof. This bar extends past the roof rack legs to maximize the space for mounting carriers and accessories. Rubberized Vortex strips in the crossbar's top channel disrupt airflow for a quiet ride, and the bar is constructed of aluminum so it won't rust. The crossbar also includes Secure Core endcaps with plastic locks to help deter theft of channel-mounted accessories.
The rubberized Vortex strips in the top channel of this crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbar cuts through the air with minimal drag - even at highway speeds.
The Vortex Aero crossbar is made of structural-grade anodized aluminum with an H-shaped internal extrusion. This extrusion strengthens the bar without adding a significant amount of weight. And the aluminum bar won't rust so you can leave it on your roof year-round.
The crossbar has a channel in the bottom for mounting to Rhino-Rack roof rack legs (sold separately). Each end of the channel includes a rubber ruler to help you center the bar on your roof. Simply use the numbers and hash marks on the rulers to ensure the legs are spaced properly in the channel.
The Vortex Aero crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strip in the top channel comes in 3 pieces, so it's easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channel capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.
You can also attach most clamp-on accessories to the bar, and the Vortex strip provides a shock-absorbing, no-slip cushion for any accessories that rest on it.
The crossbar includes 2 Secure Core locking endcaps made of durable polypropylene. These endcaps lock with a universal tubular key. The polypropylene locks secure the endcaps to the crossbar and help to secure channel-mounted accessories to the crossbar. For maximum security, you can upgrade to endcaps with all-metal lock cores (RRVA-LEC2 - sold separately).
Average Customer Rating: 4.7 out of 5 stars (3118 Customer Reviews)
Aerodynamic, aluminum crossbar lets you build an aftermarket roof rack for your vehicle. Full-length bar provides plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Includes theft-deterring plastic locks.We had the challenge of how to carry 2 kayaks this summer in addition to hauling a 30 foot gooseneck horse trailer. We have F450 crew cab with custom truck bed. We hoped to use the "head ache" bar on the truck bed to support the rear sets of Swagman Rincon supports and purchased a single Rhino Vortex bar for the forward sets on top of the cab. We have 10.5 and 12 foot kayaks and this looks to be an excellent solution. The kayaks are clear of the gooseneck trailer even in a "jackknife" position. Please note the truck bed is extra long therefore there is plenty of room forward the nose of the trailer. We have not hauled yet but will convey any issues if there are any. eTrailer tech support was excellent. Product shipped as projected. Installation took approximatly 3 hours.
My setup -
Thule - Super easy to setup. Thule Goalpost Hitch Mounted Load Bar (TH997)
Rhino-Rack Vortex Aero Crossbar (RRVA150B) and associated fit kit - Single set
Solid construction but the directions for the Rhino-Rack components are worthless. Look online to get general idea of installation.
Worked well. Some time to install but worked well for my lightweight canoe.
I think it just looks good first of all. I can carry my paddle boards and still use my one touch roof top.
I am very happy with the purchase of my Rhino Rack crossbar for my Toyota Tacoma. I added it because the Yakima Rack on my 5' bed did not hold my kayak in the position I wanted. I was pleasantly surprised by the lack of wind noise after reading numerous complaints of whistling at hwy speeds.
Needed a third Vortex bar and Etrailer had the best price. One end of the box was not taped and had come open during shipping. The plastic end got a little scraped up, but not too bad. Luckily none of the parts fell out. I suggest taping both end of boxes before shipping.
the crossbar itself is fine, I had ordered a single to accompany the two I already have on the vehicle so knew what I was getting.....or at least thought I did. Sadly the rubberized vortex strip was not included with the crossbar, appears everything else is there.
Jenny N.
10/20/2021
I will have our customer service team reach out to you.
Easy to install. I’m giving it 4 stars because this bar was added above the front driver and passenger door and is noisy driving down the interstate. I’ve gotten use to it but can’t help think there should be a way to make it quieter. I don’t hear anything from the real bars but they are on the topper.
Matches the two rails ordered previously and allows me to have three cross bars on the spaced out across the roof of my F250 cab and camper cap. With the correct spacing it allows me to transport a 26ft rowing shell centered on the truck minimizing the overhang at both ends of the truck.
Rhino makes some of the best roof racks and accessories. Easy to install and they last.
The racks are expensive, but are also worth it. I’ve used them mostly for my kayaks, but have also used them for carrying lumber and other home improvement items that won’t fit in my cab or bed.
I had a few issues with the ordering and shipping process, but they all got ironed out eventually.
Quick delivery. Good, easy to understand instructions in assembly. Haven’t yet put the bar to use but the solid construction and attachment to the side of the truck seems to be very good. Will was a great help as I needed only 1 bar for my needs. Thanks
Great service! So far so good. Highly recommend etrailer.com
Fits the system , has many accessories that can be added . Good quality
Bar is well made. Etrailer service is great!
A year later and they hold up great! I haul something every week on them and no complaints.
Great easy to install
Looks good and it works with my system, what else do you need!
Excellent product and service
Excellent quality. Easy to install. No issues.
Fits Great, Strong, Easy, Love it!!
Seems well made and looks great
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
D R.
3/24/2018
Great system, etrailer provides great service. I recommend whenever possible.