Parts Needed to Add One Rhino Rack Crossbar to a 2022 Ford F-150 SuperCrew or SuperCab

Question

Question:

I need just one 1 Rhino Vortex crossbar and towers/feet for my 2022 Ford F-150. Somebody told me this was possible from etrailer, but I dont see it as an option on your website. Thx for any assistance u can offer. Mark-

asked by: Mark E

1

Helpful Expert Reply:

You came to the right place Mark we do indeed sell those parts individually. I have listed them below:

Rhino-Rack Vortex Aero Crossbar - Aluminum - Black - 59" Long - Qty 1 item # RRVA150B

Custom DK Fit Kit for 2 Rhino-Rack 2500 Series Roof Rack Legs item # DK427H

Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars item # RRRLKVAH

These are the individual parts to add one crossbar to your 2022 Ford F-150. These fit the SuperCrew Cab and the SuperCab models.

expert reply by: Jerred H

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, the Curt Custom Fifth Wheel Installation Kit for Ford #C93WR will work just fine with the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040.

view full answer...

Answer 5

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 6

In order to attach the Rhino-Rack Pioneer Platform to a set of crossbars you would need the kit that comes with universal mounts which is part #RR42114BF for 48" long x 37" wide or part #RR42115BF for 58" long x 47" wide. This…

view full answer...

Answer 7

Thanks for reaching out, Steve! Both Air Lift LoadLifter 5000 kits, parts #AL47PD and #AL82WQ, fit a 2021 Ford F-150 4WD. The only difference is whether your truck has the CCD (Continuously Controlled Dampening)/Onboard Scales, or the PowerBoost…

view full answer...

Answer 8

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 9

Both of the kits you mentioned are a fit for your 2016 Ford F-150. The difference is that the part #TFR1504E has a 6,000 lb capacity and the part #TFRTT1504E has a 7,000 lb capacity. You would want to go with the lower rated spring as it will be a…

view full answer...

Parts Needed to Add One Rhino Rack Crossbar to a 2022 Ford F-150 SuperCrew or SuperCab

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching