To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Heavy-duty crossbars mount to Yakima towers (sold separately) to create an aftermarket truck bed rack or roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.
Features:
Yakima HD Bar-MD:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2013 Mazda CX-5, we're going to be test fitting the Yakima CoreBar Roof Rack System consisting of part numbers y00421. These are the Yakima CoreBar cross bars, 50 inches long, part number y00148. These are the SkyLine Towers for the Yakima cross bars for fixed mounting points, part number y00233. These are the landing pads which the SkyLine Towers will sit on. Now we already have the front one installed. The bars themselves have a nice aerodynamic shape to them and that's going to cut down wind noise and drag while you're driving.
They're constructed of steel and they have a carrying capacity with the other bar of 220 pounds. That packs a little bit of extra weight that you can put on top of your car. Although you want to double check to make sure your car can withstand that weight. Let's go ahead and show you how the rear one goes on. We'll start with the landing pads first, which these 2 pieces here are the landing pad. You open up the cover here and we'll start our rubber pad on the bottom, which just snaps in to place.
Once that's together, we'll take our bolt, our washer, and plastic washer, put them through the top and install it onto our fixed mounting point on our Mazda. Okay. You'll see the fixed mounting point towards the rear here. We'll kind of line it up, and then we'll get our Allen tool and tighten it down. Once you take the roof rack and CoreBars off, you can take this piece here, pop it into place, and you can leave these on at all times. Next we'll go ahead and assemble our SkyLine Tower System for the bars.
Now, this plastic piece here, and this piece that will fit along the bar itself, that comes with the bar. We'll go ahead and pop that plastic piece onto the top of our tower. We'll make sure that our bracket here's facing the right direction, and we're going to install that to the screw at the top of the tower here. Then take our included tightening tool and tighten it down to the tower itself. Now the best thing about this tightening tool is, you're going to hear 3 or 4 clicks once it's tightened down, therefore you know you haven't over tightened it, or under tightened it.
Slide this on to our CoreBar. Now before we actually took some measurements, and this is kind of a trial and error part of it. You want to measure from the edge here to the end of the bar, and you want it to be equal on both sides when you place this onto your vehicle. We'll take our measurement real quick. All right. Then we'll make our adjustments as needed. Now that we have everything adjusted, we'll tighten this center screw here until your hear those pops. Do this on both sides. All right. Now we'll finally close up our clamps here and secure it down. You can take out these plastic pieces here and replace it with the Yakima Same Key System for additional security to lock your roof rack to your vehicle. Finally, we'll put on our end caps, and I think we'll be good to go. There you have it for the Yakima CoreBar Roof Rack System on our 2013 Mazda CX-5.
Average Customer Rating: 4.8 out of 5 stars (190 Customer Reviews)
Heavy-duty crossbars mount to Yakima towers (sold separately) to create an aftermarket truck bed rack or roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
etrailer was a great place to order, quick and easy. Yakima products however are over priced and overly complicated.
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
Parts arrived as advertised for the model
Car so happy to find the right fit
But super pricy for some plastic.
You guys provide great products and excellent customer service.
Thanks
At first, a little tricky to install, as the kit comes with hardware for a variety of applications (different length/size bolts, etc). But after a quick look at the directions and identifying which bolt to use for my car, install was a breeze. I love this Yakima setup because I can remove the bars/towers and leave the landing pads with a cap. Makes it great for taking the canoe out on weekend trips, but not taking the fuel-economy hit during the weekday commute to work.
These adapters were easy to install and made my system fit together nicely.
Your service is nothing short of excellent! Thank you
While putting the roof racks together, one needs to pay close attention to the detailed instructions; but, so far, the equipment is working well with a good fit on my Toyota highlander—I’ve traveled some 1000 miles so far.
I had a difficult time identifying whether these were the correct adapters for the rack towers that I was purchasing to fit my tracks but that has more to do with yakima doing everything a-la-cart instead of having kits that include everything you need if I hadn't already had the HD bars on my other rack and wanted to be able to transfer them to this rack I probably wouldn't have went to this expense because I think they are overpriced.AS far as etrailer is concerned I always receive great service and products and they are always well packaged and never damaged by poor delivery care and always fast delivery speed.
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
Great product and even better was the service with etrailer! These guys make it happen and delivery was super fast. Thanks for a fantastic experience, will be a return customer.
Yakima HD bars 60”
2018 Ford Expedition
Great product, as are all Yakima products,in my opinion. These are on a Yakima system installed on my Diamond Back tonneau cover. Very pleased with them
The Yakima products are doing great. Just got home yesterday from a 18 day trip using them in Michigan's upper peninsula. Love them. Great products. Thanks again.
The Yakima products are doing great. Just got home yesterday from a 18 day trip using them in Michigan's upper peninsula. Love them. Great products. Thanks again.
Great company. Fast delivery.
These are some heavy duty crossbars.
Owned several surfboard racks in 45 years and these are by far the best.
Great tie downs also.
We purchased the rack 5 weeks in advance of our up and coming trip. (Rack is amazing FYI). However, The website states free shipping over a certain amount. Weeks went by with notifications nothing was sent and the order kept being pushed back.
Once I called I was told those who chose to purchase shipping vs opting for the free shipping got their orders firsts; everyone else fell to the bottom. After waiting a month for “free shipping” I opted to have paid shipping and I received the rack within days.
While this company has many products I could use, I refuse to use them again because what is advertised is NOT what they ethically hold themselves accountable too.
Solid and well engineered product. Trevor provided excellent support and service in selecting and ordering to ensure the right solution.
Worked great
The fit is good on the 22 Wilderness but there is definitely wind noise and I will add a diverter soon.
This part adapted like no other adapter
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
Have worked quite well for what we need. Very happy.
These Yakima HD SL adapters are necessary to connect HD crossbars with Skyline Towers. This style is somewhat difficult to locate but Etrailer had them in stock, no waiting.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.