Does The Replacement T-Bolt For Thule TracRac And Xsporter Ladder Racks Fit The Yakima HD Crossbars

Question

Question:

Will These fit the Yakima HD crossbar channels?

asked by: Jezreel C

1

Helpful Expert Reply:

Yes, the Replacement M8 T-Bolt for Thule TracRac and Xsporter Ladder Racks # 853-5715 will fit into the cross bar channels of Yakima HD Crossbars like # Y01157.

expert reply by: Bryce D

1

Answer 1

The channels of the RetraxONE XR part #RTT-82383 are a standard size which means standard roof rack t-bolts like the #853-5715 would work.

view full answer...

Answer 2

Instead of using the M8 T-Bolt #853-5715 for the Side Rails for Retrax XR Series Hard Tonneau Covers #RTT-82383 you can use the Square Nut #853-7557 instead. This has the same dimensions as the T-Bolt head section but this has threads for an M6…

view full answer...

Answer 3

The Thule replacement M8 T-bolt #853-5715 T-bolt head measures 3/4 inches. The threaded part of the t-bole is 1-inch long, and it has a .30 inch diameter. I have attached a photo of the 853-5715 with the dimensions noted you can check out.

view full answer...

Answer 4

The t-bolt used will depend on the accessory being installed. I reached out to my contact at Retrax to find the size of the track to know what size t-bolts it will accommodate. The track measures 13/16 inches wide x 1/4 inch tall with the top…

view full answer...

Answer 5

There are a few different Thule Awnings and the hardware for them can change depending on how they mount: roof mount, wall mount, and roof rack mount. The only way I can confirm what the correct t-bolt is would be for you to provide me with both the…

view full answer...

Answer 6

The head for Thule T-bolt #853-0782 is 0.7 inches square and 0.19 inches tall so it is the same as #853-5715. The overall length is 2.21 inches, the threaded part makes up 2 inches of that. It has a diameter of 0.31 inches (8 millimeters).

view full answer...

Answer 7

You could use the Thule M8 T-Bolt part #853-5715 which is just a little longer at 26 mm.

view full answer...

Answer 8

The Rhino-Rack you will need for your 2020 Chevrolet Silverado 5'8 truck bed with the RetraxONE XR Hard Tonneau Cover - Retractable - Polycarbonate - Matte Black - Accessory T-Slots, part #RTX24YR, is the Rhino-Rack Vortex Crossbar System for…

view full answer...

Answer 9

If by RTT you mean a roof top tent the RetraxONE XR Hard Tonneau Cover w/ Trax Rails #RTT-60851 would easily be able to support that. Then for a roof rack setup that fits the rails of the cover and your Rhino Rack Aero Bars you'd want the…

view full answer...

Answer 10

The Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - Black - 71" Long, part #RRVA180B-RRRLT600, is what you need. It has a weight limit of 220lbs. The legs mount directly to the tracks of your…

view full answer...

Answer 11

To get your Thule ProRide XT #TH598004 type bike rack attached to your RetraxONE XR Hard Tonneau Cover #RTT-60851 you'll need the Fit Kit for Thule Podium-Style Roof Rack Feet #THKIT3101. This fit kit will slide into the rails of your #RTT-60851…

view full answer...

Answer 12

I reached out to Thule and the #853208914 does not have a weight capacity they've tested it at, but it's not truly going to be weight bearing a lot of weight, so it would be an acceptable solution to mount the Batwing to your Thule crossbars.…

view full answer...

Does The Replacement T-Bolt For Thule TracRac And Xsporter Ladder Racks Fit The Yakima HD Crossbars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching