Will the Yakima Slim Shady Fit on Yakima HD Cross Bars

Question

Question:

Will these clamps work on the Yakima HD Cross bars?

asked by: Ivan Y

0

Expert Reply:

Yes the Replacement Clamp Assembly for Yakima SlimShady Roll-Out Awning part # 8880737 will work out well with the Yakima HD Bars like part # Y01157. The clamps are designed to work with crossbars up to 1 1/2" tall which is what the Yakima HD's are.

expert reply by: Randy B

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

Answer 5

The Rhino-Rack J-Style Kayak Carrier #S512 should fit your 2021 Toyota RAV4 roof rack just fine, but make sure the crossbars are no wider than 3-1/8" and no taller than 1-1/4" to verify fitment. You can install 2 of these kayak carriers, or…

view full answer...

Answer 6

Yes, the etrailer Hitch Receiver item #e23zr will fit your 2022 Toyota RAV4. This is a custom fit hitch that bolts directly to your RAV4's frame with included hardware. You will have some limitations at the center of the hitch where the receiver…

view full answer...

Answer 7

It would be a little tight but the Camco AC Cover part #CAM45392 is close enough to the dimensions of your Furrion Chill RV AC unit that it would fit and work great.

view full answer...

Answer 8

Hey Brian, I reached out to my contact at Yakima regarding the Bottom Infill #Y01166-LC. Unfortunately, they do not have a dimensional drawing or cross section that they could send. Nor do we have any in stock here so I can't go grab one and…

view full answer...

Will the Yakima Slim Shady Fit on Yakima HD Cross Bars

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching