Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2
Item # Y38KB
Our Price: $688.80
Confirmed to Fit
2015 Mazda CX-5
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (75)
- Q & A (0)
- Videos (6)
- Photos
Yakima Roof Rack - Y38KB
- Aero Bars
- Crossbars
- 70 Inch Bar Space
- Yakima
- Black
- Overhang
- 2 Bars
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 70" Long - Black - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima Landing Pad 11 Fit Kit:
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with fixed factory install points
- Attach to factory fixed points with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Yakima SkyLine Towers - Qty 4:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000233 Landing Pad 11 for Yakima Control Towers
8000427 Yakima Jet Stream Cross Bars - Aluminum - 70" Long - Qty 2 - Black
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Roof Rack Review - 2013 Mazda CX-5
Today on our 2013 Mazda CX-5, we're going to be test fitting the Yakima CoreBar Roof Rack System consisting of part numbers y00421. These are the Yakima CoreBar cross bars, 50 inches long, part number y00148. These are the SkyLine Towers for the Yakima cross bars for fixed mounting points, part number y00233. These are the landing pads which the SkyLine Towers will sit on. Now we already have the front one installed. The bars themselves have a nice aerodynamic shape to them and that's going to cut down wind noise and drag while you're driving.
They're constructed of steel and they have a carrying capacity with the other bar of 220 pounds. That packs a little bit of extra weight that you can put on top of your car. Although you want to double check to make sure your car can withstand that weight. Let's go ahead and show you how the rear one goes on. We'll start with the landing pads first, which these 2 pieces here are the landing pad. You open up the cover here and we'll start our rubber pad on the bottom, which just snaps in to place.
Once that's together, we'll take our bolt, our washer, and plastic washer, put them through the top and install it onto our fixed mounting point on our Mazda. Okay. You'll see the fixed mounting point towards the rear here. We'll kind of line it up, and then we'll get our Allen tool and tighten it down. Once you take the roof rack and CoreBars off, you can take this piece here, pop it into place, and you can leave these on at all times. Next we'll go ahead and assemble our SkyLine Tower System for the bars.
Now, this plastic piece here, and this piece that will fit along the bar itself, that comes with the bar. We'll go ahead and pop that plastic piece onto the top of our tower. We'll make sure that our bracket here's facing the right direction, and we're going to install that to the screw at the top of the tower here. Then take our included tightening tool and tighten it down to the tower itself. Now the best thing about this tightening tool is, you're going to hear 3 or 4 clicks once it's tightened down, therefore you know you haven't over tightened it, or under tightened it.
Slide this on to our CoreBar. Now before we actually took some measurements, and this is kind of a trial and error part of it. You want to measure from the edge here to the end of the bar, and you want it to be equal on both sides when you place this onto your vehicle. We'll take our measurement real quick. All right. Then we'll make our adjustments as needed. Now that we have everything adjusted, we'll tighten this center screw here until your hear those pops. Do this on both sides. All right. Now we'll finally close up our clamps here and secure it down. You can take out these plastic pieces here and replace it with the Yakima Same Key System for additional security to lock your roof rack to your vehicle. Finally, we'll put on our end caps, and I think we'll be good to go. There you have it for the Yakima CoreBar Roof Rack System on our 2013 Mazda CX-5.
Customer Reviews
Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2 - Y38KB
Average Customer Rating: 4.9 out of 5 stars (75 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: David 04/26/2024
Parts arrived as advertised for the model
Car so happy to find the right fit
But super pricy for some plastic.
by: Dan B.05/01/2016
At first, a little tricky to install, as the kit comes with hardware for a variety of applications (different length/size bolts, etc). But after a quick look at the directions and identifying which bolt to use for my car, install was a breeze. I love this Yakima setup because I can remove the bars/towers and leave the landing pads with a cap. Makes it great for taking the canoe out on weekend trips, but not taking the fuel-economy hit during the weekday commute to work.
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Todd06/24/2023
These bars are the cats meow! Love the look of an aircraft wing. Easily supported our 2 kayaks.
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: Ricardo03/03/2021
The JetStream crossbars are awesome. Unfortunately the box that these came ' in was damaged, and when I opened it both crossbars had scratches. It is only cosmetic, but when you pay top dollars for a good product you expect that it will be well packaged so is not damaged when shipped. If it wasn’t for the damaged packaging and scratches I would give it 5 starts.
by: Dan 11/06/2023
Great company. Fast delivery.
by: Jeremy06/05/2018
My experience with etrailer has been excellent. There was going to be a potential delay in one of the products, but their customer service promptly informed me, half the price of some of their competitors so can't really complain. In the end they got the part ahead of schedule and was able to ship in a timely manner. I will definitely keep them in mind for future purchases.
by: Axl01/02/2017
Very good product. The Yakama towers and cross bars feel very solid and appears to be high quality. Very easy install. Others have complained about the instructions, but guess I'm a visual person because the pictures all seemed very clear to me and the install was very easy. They do sit higher than I expected. After adding a Rhino Rack cargo basket, we only have about 4-5" clearance below the garage door.
by: Doug02/16/2022
First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.
by: Philip 05/29/2023
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
by: Luke07/20/2012
I got my new landing pads the day they said it would arrive. The pads were in their original yakima packaging, properly packed and overboxed. I work for a logistics company so I know the importance of getting product to a customer on time and exceeding their expectations. Very well done etrailer.com! The landing pads is just part of what I needed, and with the discount code included for my next purchase, I will be back. Thanks again.
by: SJHughes12/23/2017
Simple installation to vehicle with supplied hardware and tools. Once these bases are installed to the vehicle, it is simple for a single person to install and remove crossbars and towers in just a couple of minutes.
by: Robert P.12/23/2010
Yakima Roof Rack for BMWI ordered a yakima roof rack for my BMW during the mad rush of Christmas shopping and have received everything need for the assembly in a very short amount of time. I have even received follow up emails telling me the status of the shipping as well as a courtesy email. I also found that etrailer.com is also much cheaper than other retail stores such as REI. I highly recommend using etrailer.com!
by: Roy05/02/2016
Fit my nissan nv200 no problem. Comes with different size and length bolts to fit multible vehicles. Directions did tell me to use different size bolts thay clearly were the wrong ones but it was easy to figure it out. Also: u need all 3 products to complete ur roof rack system.
by: James H.12/13/2010
A rack for Porsches for lessFor those Porsche owners put off by the price of the Porsche Roof Transport System, try Yakima. For significantly less, you get a solid rack which uses your Porsche mounting points and since it is a component system, it fits both Caymans and Carreras.
by: Don Oakley11/12/2013
My roof rack arrived as promised and in good condition. Your web site was very useful in instructing the installation and how the parts matched with my other accessories. I did have a struggle lining up the screw holes, but with patience I succeeded.
by: Kyle 10/13/2011
Just installed to my 08' Subaru Impreza using the factory bolting mounts. Easy setup did in about an hour or so including my Yakima High Roller bike rack. Seems sturdy, hopefully so to carry my heavy downhill mountain bike!
by: Tasha K05/23/2020
We bought this at the same time as a roof rack for our first family camping trip. These were really easy to install and have held up excellently in the last year.
by: Jake01/17/2019
No complaints! Fits seamlessly with the towers and super easy to remove and replace the bars!
by: Sean06/28/2020
The rep from etrailer (Noah conformed my online order, made certain my order was correct for the vehicle I was outfitting and made certain I received my order items on time before my trip. This company is great!
25
483
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Recommended Thule Aero Style Bar for Lengths Longer than 60 Inch WingBar Evo for Subaru OutbackThule WingBar Evo Crossbars do not come in lengths beyond 60 inches. To get longer bars that are compatible with your Thule feet you will need to use their ProBar. The Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2 # TH713600 can be cut to your custom length as the channels run the entire length of the bars. They still have an aero style with a top channel but they also have a rear channel and bottom channel that span the entire length to give you more mounting options. These...
view full answer...
- Will Yakima SkinnyWarrior and SkyBox 16 Carriers Fit 60 Inch JetStream CrossbarsThe Yakima SkinnyWarrior # Y07014 is 23" wide while the Yakima SkyBox NX 16 # Y95AV is 35" wide. This means both products will take up 59" of crossbar space so mathematically they will fit on the crossbars but the problem you're going to encounter is opening up the SkyBox since it will have to tilt in towards the SkinnyWarrior. It may works out but it's going to be a tight squeeze. You could swap out your 60" bars for the longer 70" JetStream Crossbars # Y00427 but that's a pretty big...
view full answer... - Length of Crossbars Needed on ARE Cap for Thule Hullavator & Motion XT Cargo BoxYou can mount the Thule Motion XT Rooftop Cargo Box # TH629806 and Thule Hullavator Pro Kayak Carrier # TH898 on your Tacoma's ARE truck cap with Yakima tracks, but the 60 inch bars aren't wide enough. The Motion XT is 36" wide and the Hullavator takes up 28-1/2" of crossbar space so there isn't quite enough room for both to fit comfortably. What you will need instead are the 70" crossbars, the Yakima JetStream Crossbars 70" Long - # Y00427. Since you already have the tracks, the other...
view full answer... - Yakima Towers Needed to Mount to Landing Pad 1 on Track SystemIt looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If...
view full answer...
- How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
view full answer...
- Recommended Roof Rack for Using Two Hullavators on a 2020 Ram 1500The Thule Hullavator Pro Kayak Carrier item # TH898 requires an extra 4" - 8" of crossbar length past the legs of a roof rack to function correctly. To use two of them you will need a minimum of 57" of crossbar length. For your 2020 Ram 1500 truck, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 item # Y00427 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit...
view full answer... - Roof Rack Recommendation for 2007 Ford F-350 Super DutyThe Whispbar roof racks were discontinued awhile back, so unfortunately we won't be getting any more of the K469 clamp kits in. To provide a roof rack on your 2007 Ford F-250, I'd recommend a Yakima JetStream roof rack that would be assembled from the following parts: • 70 Inch JetStream Aero-Style Crossbar, part # Y00427 • Yakima BaseLine Roof Rack Towers, part # Y28TR • Yakima Vehicle-Specific Fit Clips, part # Y79QR I've linked to a product demonstration video featuring the Yakima...
view full answer... - How To Carry A Kayak and Canoe On a 2020 Ram 1500 While TowingThe only way to carry a kayak and/or canoe on the 2020 Ram 1500 while towing is to install a roof rack on the truck and use a carrier. I recommend the Yakima JetStream Crossbars part # Y00427 because they are aerodynamic and their built-in ridges help control air flow to cut down on wind noise. They also have a nice T-slot channel that allows you to mount accessories with a rubber strip that does not need to be trimmed to add accessories like other brands. You will also need the BaseLine...
view full answer...
- Why are the Malone SteelTop # MPG203 Not Confirmed to Fit My 2020 Toyota 4Runner with Raised Rails?I have a fitment answer for you. The reason why the Malone SteelTop Roof Rack - Square Crossbars - Raised, Factory Side Rails - Steel - 65" Long # MPG203 is not listed as a confirmed fit for your vehicle is because the 65" length of the crossbars are deemed far too long for your 2020 Toyota 4Runner Limited with raised factory rails. This is why the SteelTop 50" # MPG201 and SteelTop 58" # MPG202 are confirmed fits. You are right that the towers # MAL25YR will fit your vehicle. Also, another...
view full answer... - Length of Yakima Crossbars Needed to Load 2 Thule Hullavators # TH898 on a 2019 Honda PilotWhile we do technically have an option for mounting 2 Hullavators # TH898 onto your 2019 Honda Pilot with the Yakima SkyLine Towers # Y53TR and Landing Pad 19 # Y00245 on your flush rails, you would need at least 72" inches of usable crossbar space for the required 4-8 inches of length past the feet. This is because one Hullavator measures 36" long. The 70" JetStream crossbars # Y00427 does not provide enough length. With that being said, the only Yakima option we carry that has that length...
view full answer... - Can Longer Yakima Crossbars be Used on 2023 Honda HR-V For Thule HullavatorYou can definitely use longer Yakima crossbars on your 2023 Honda HR-V for the Thule Hullavator Pro # TH898, but don't go all the way to the 70 inch # Y00427, as these are 20 inches longer than the recommended # Y00425 and will stick out way too much on your HR-V. So instead use the 60 inch Yakima JetStream Crossbars # Y00426. Then to complete the rack set up on your '23 HR-V you do have the right parts with the BaseLine Towers # Y28TR, and Fit Kits # Y06159 & # Y06181. In regards to...
view full answer... - Are longer Crossbars Available For Yakima Roof Rack On 2017 Subaru ForesterIf you have the Yakima Black Jetstream crossbars on your 2017 Forester, the longer crossbars that will work with your roof rack are part # Y00426 for 60 inch, and part # Y00427 for 70 inch. If you have the Yakima CoreBar roof rack, replacement 60 inch crossbars are part # Y00422 and 70 inch are part # Y00423. If your roof rack has round crossbars you can use part # Y8810025 for 66 inch and part # Y00411 for 78 inch. You will need to check with your local authorities to see if there...
view full answer... - How to Use Longer Yakima or Thule Crossbars for a 2009 Dodge JourneyIf you have longer bars from Yakima, like the 70" JetStream part # Y00427OR the 70" CoreBar # Y00423, then all you need for your 2009 Dodge Journey are the TimberLine Towers # Y33TR. If you happen to have Yakima round bars then you need the adapter # Y03536 as well. For your Thule bars you will need to use the Evo Raised Rail Feet # TH710401 with the 69" ProBar Evo Crossbars # TH713600 as the aero-style Thule bars have a limited mounting space underneath them and I don't think it will...
view full answer...
- Parts Needed to Order 70 inch Yakima Jetstream Roof Rack for 2016 Subaru OutbackTo do a 70 inch Yakima Jetstream roof rack on your 2016 Subaru Outback Wagon with the flush rail crossbar setup you'd need the Skyline Towers part # Y53TR, the fit kit # Y00241 and the crossbars # Y00427.
view full answer... - Can I Mount 2 Hullavators # TH898 on My 2010 Dodge Caravan with Raised Rails?Technically, you can install 2 Thule Hullavators # TH898 on the raised rails of your 2010 Dodge Grand Caravan. However, the crossbars you need on your raised rails need to have at least 4 inches of overhang past the feet on each end in order for the Hullavators to function properly. With this factor, you will have pretty long crossbars on your roof. It is important to make sure that the crossbar length does not extend past the mirrors. I recommend measuring your roof from mirror to mirror...
view full answer... - What Size Yakima Jetstream Crossbars Are Needed For RetraxPRO XR Tonneau On 2019 Toyota Tacoma? Retrax recommends using the 60" Yakima JetStream Crossbars # Y00426 with their RetraxPRO XR Hard Tonneau Cover # RTT-80852. You will need the Skyline Towers # Y53TR and 2 of the Landing Pad 1 Kits # Y00221. Since the Yakima Jetstream crossbars do have a full length bottom channel you could mount the 70" Bars # Y00427 but do know the bars will stick out past your cab.
view full answer... - Parts Needed to Install 70" Crossbars on a 2017 Honda PilotHave you tried offsetting the crossbars on your 2017 Honda Pilot? If not, you might be able to get the clearance needed by going that route. If that doesn't work then you need a whole new roof rack system since crossbars will only fit their same-brand counterparts and the Thule crossbars have a small amount of space underneath for the legs to fit. It sounds like you have a naked roof so for your application you can use the following from Yakima for your application: - 70" JetStream...
view full answer... - Rhino Rack Batwing Awning Crossbar CompatibilityThe Yakima JetStream Crossbars # Y00427 do have the channel but the weather strip on the inside will make the install difficult. If you need the Rhino-Rack Batwing Awing # RR33400 to be safe, you need to get the Rhino Rack Vortex Crossbars # RRVA165B-2 or the Heavy Duty Crossbar # RB1120B-2 but you'll need the adapter kit # RR33101. There is a awning that will work with your current Yakima JetStream Bars, Its the Yakima SlimShady Awning # Y36VR.
view full answer... - Budget Friendly Roof Rack, Kayak Carrying and Bike Carrying Options for 2017 Ram 2500The most budget friendly roof rack option we offer for your 2017 Ram 2500 would be the Vortex Aero rack from Rhino-Rack, which consists of: • 59 Inch Vortex Aero Crossbars, part # RRVA150B-2 • Roof Rack Feet, part # RRRLKVA • Vehicle Specific Fit Kit, part # DK043 The roof rack has a 165 lb weight capacity. For a kayak carrier, Malone offers an inexpensive option for 2 kayaks, part # MAL38FR. This carrier has a 75 lb per boat weight capacity and includes the straps to attach the kayaks...
view full answer... - How To Carry 4 Bikes on a 2017 Ram 3500 While Towing a 5th Wheel TrailerIf I were you, I would place the bikes on a bike rack in front of the vehicle. The reason being that taking four bikes on and off the roof each time is going to be a cumbersome task to say the least. There is also a risk that you could damage the vehicle with the bikes. That said, I will provide the parts needed for either option below. The bike rack on the front of the vehicle will add a bit of length to your already extended setup but I am sure you will find the ease of use worth this...
view full answer... - Parts Needed to Add Yakima Rack to Thule Tracks on Leer CamperYep, you can put a Yakima roof rack in the Thule tracks on your Leep truck cap. I'll go ahead and list out the parts you need: - (Order a quantity of 2 of these) Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - SkyLine Towers for Yakima Crossbars # Y53TR - 50" Long Yakima JetStream Crossbars # Y00425 OR - 60" Long Yakima JetStream Crossbars # Y00426 OR - 70" Long Yakima JetStream Crossbars # Y00427 You'll want to measure the width of your tracks and get ones that extend...
view full answer... - Will the Truck Hero Elevate Rack System Work With Yakima Roof RackYes, the TS (T-Slot) Rails for Truck Hero Elevate Rack System part # TH85FR is a universal track system that works with most inside the bed rail mounted tonneau covers. The tracks will then accept pretty much any track mounted accessory. In order to add a Yakima system you would need the following: SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 (2) Yakima JetStream Crossbars part # Y00427
view full answer... - Parts Needed to Install Yakima JetStream Crossbars on 2021 Ford F-250To install 60 inch Yakima JetStream # Y00427 aero-style crossbars on your Ford F-250, you'll need the # Y28TR BaseLine towers and the # Y06185 vehicle-specific fit kit.
view full answer... - Yakima Roof Rack and Bike Rack Recommendation for Tracks on a Pop-Up CamperFrom the looks of your photos, you have the Yakima Round Crossbars like the # Y00411 along with the old Control Towers # Y8890027. If you are looking for a newer model of crossbars that have a more aerodynamic design that fit into the tracks, I recommend the following setup: - Yakima JetStream Crossbars - 70" # Y00427 - Yakima SkyLine Towers # Y53TR - 2 sets of the Landing Pad 1 # Y00221 - Same-Key Locks # Y07204 With this setup, the JestStream crossbars create a much quieter ride and...
view full answer...
- What Roof Rack Fits My Flush Rails on My 2022 Chevy Bolt EUV?Thanks so much for the photos! I can see how you might be confused. I went ahead and confirmed with Yakima that these rails are considered flush rails with fixed mounting points on your 2022 Chevy Bolt EUV. For a great roof rack system for your setup, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR - Landing Pad 19 # Y00245 - Yakima Same-Key...
view full answer...
- Can I Use The Thule Hullavator On Factory Crossbars With No Overhang?The Thule Hullavator # TH898 will require crossbars that overhang the towers by 4' - 8". There is not any kind of adapter that is made for this purpose. Your best bet will be to replace the factory crossbars with aftermarket crossbars that have some overhang. Since your 2023 Subaru Outback already has the factory installed rails running front to back, you will be able to mount crossbars using these rails. I recommend the Yakima JetStream Roof Rack, which will consist of the following parts: Yakima...
view full answer... - Roof Rack for 2012 Ford Transit Connect with Longer CrossbarsThe longest crossbar roof rack we have for your 2012 Ford Transit Connect is the Yakima Roof Rack # Y01156, # Y53TR, # Y03541, and # Y00233 which comes with a similar square HD crossbar to the Rhino Rack you mentioned. This rack will give you 55 inch crossbars.
view full answer... - Load Assist Kayak Carrier for 2012 Hyundai Sante Fe With Factory Roof RackI have a couple solutions for you but the Thule Hullavator # TH898 will not work with your factory roof rack on your 2012 Hyundai Sante Fe. The carrier requires 4"-8" of crossbar overhang from the support tower. This is to provide enough clearance for the lift assist to clear the side of your 2012 Hyundai Sante Fe. You can swap out your factory roof rack for a roof rack system that has an overhang that will work with the carrier. The Yakima Jetstream Roof Rack could get you the overhang...
view full answer... - Can the Yakima HardTop SL Roof Rack Be Obtained With 60 TracksCorrect, the kits are only offered with tracks up to 54" long but you can still piece together your own kit with the longer 60" tracks which I have attached for you below. Yakima 60" Tracks for Roof Racks part # Y01135 Landing Pad 1 for Yakima Control Towers part # Y00221 (2) Yakima CoreBar Crossbars part # Y00422 SkyLine Towers for Yakima Crossbars part # Y53TR
view full answer... - Which Yakima Towers Are the Landing Pad 23 Compatible WithThe Landing Pad 23 for Yakima SkyLine and Control Towers - Qty 4 # Y98FR are only compatible with Yakima SkyLine Towers for Yakima Crossbars # Y53TR and the older Yakima Control Towers like the Replacement Yakima Control Tower for Factory-installed Tracks (QTY 1) # Y8890027. If you've got a different model tower than either one of those, you'll need to replace the towers in order to use the # Y98FR landing pads on your 2019 Toyota RAV4.
view full answer... - Recommended Roof Rack to Use Thule Hullavator # TH898 on a 2017 Jeep Grand CherokeeI'm so sorry to hear about your situation! From the looks of your previous crossbar order, you ordered the Thule AeroBlade Edge Roof Rack TH7602-TH7602. While we definitely have roof rack options for you to work with a Thule Hullavator # TH898, the AeroBlade Edge crossbars do not provide you the required 4-8 inches of crossbar overhang past the feet required for the Hullavator to function. This is because the AeroBlades do not extend past your rails. Judging that you purchased AeroBlades,...
view full answer... - Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
view full answer... - What Length of Yakima JetStream Crossbars is Recommended for 2012 Subaru Forester Roof RackFor your 2012 Subaru Forester Yakima recommends the 50 inch Jetstream bars if you have the raised roof rails. You'd need the roof rack components # Y00425 and # Y33TR to complete the rack. If instead you don't have roof rails you'd still need 50 inch Jetstream bars with the components # Y00425, # Y53TR, and # Y00233 and you'd be set! I attached an install video that shows a Yakima JetStream roof rack installed on a similar Subaru Forester for you to check out as well.
view full answer... - Can Two Thule Hullavator Kayak Carriers Be Used On a 2019 Subaru Outback WagonIn order to use a Thule Hullavator Pro Kayak Carrier part # TH898 on a 2019 Subaru Outback Wagon you will need to install an aftermarket crossbar system as the factory crossbar system doesn't have the required overhang needed. That said, you'd only be able to install one Hullavator on the roof as two would require a very large crossbar and this is not recommended by Thule anyway. Therefore, you'd need a different carrier for the other kayak and for this I recommend the etrailer J-Style...
view full answer... - Will Two Bikes and a Kayak Fit on a 2019 Subaru Forester Factory Roof RackIf you were to upgrade to an aftermarket roof rack then I believe you would be able to fit two bikes and a kayak on top of your 2019 Subaru Forester but not with the factory roof rack. In order to upgrade, I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y53TR, and part # Y00248 which actually replaces the factory roof rack. The Yakima JayLow Kayak Carrier part # Y04073 along with two of the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 would then allow...
view full answer... - Parts Needed to Install Yakima Roof Rack on 2017 Subaru Outback WagonYes, the Landing Pad 15 # Y00241 is the correct Landing Pad for a 2017 Subaru Outback Wagon with flush mounted roof rails. For a round bar roof rack you would need these part numbers # Y00408, # Y53TR, # Y03536, and # Y00241. For an aero bar roof rack you would need the # Y00421, # Y53TR, and # Y00241. Aero bars provide better fuel mileage and less wind noise.
view full answer... - Recommended Platform Rack and Crossbars for a 2022 Toyota HighlanderTo be able to mount the Yakima LockNLoad platform rack to your 2022 Toyota Highlander you're going to need to add a set of crossbars with the Yakima JetStream Crossbars # Y00425, and the SkyLine Towers for Yakima Crossbars # Y53TR, and the Landing Pad 28 for Yakima SkyLine And Control Towers # Y66VR. I know you mentioned you have OEM crossbars, but most of the time people get roof rails and crossbars mixed or they use them interchangeably when they are not the same. If you do actually...
view full answer... - Parts Needed to Add Yakima LockNLoad to Thule TracksYes, to add the Yakima LockNLoad Platform Roof Tray # Y05048 to Thule tracks you'll need to order three of the Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221, the SkyLine Towers # Y53TR, the SkyLine Towers # Y72TR, and the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-3.
view full answer... - Can I Fit Four Pair Of J-Style Carriers On Top Of My 2013 GMC Yukon?You could possibly fit four of the # S65148 on your roof but it will be a pain to load majority of your kayaks up there. There is a better solution I found that will be more user friendly. You are going to need a large roof rack bar to accommodate your 4 kayaks. I suggest the Yakima 60" HD Bars # Y01157 and If you have factory side rails you will need the Yakima SkyLine Towers # Y53TR along with the Side Rail Adapter # Y03541 and Landing Pad # Y00221. If you have factory raised rails...
view full answer... - Is The Yakima Crossbar Weight Limit Dynamic Or Static, What Roof Rack Do You Recommend For A Mazda 3The weight limit of the crossbar is a dynamic weight limit. It is also independent of the rack itself. For example, on your 2021 Mazda 3, the Yakima roof rack has a weight limit of 125 lbs. The maximum weight limit of your roof rack is based on the part of the system with the lowest weight rating. In this case, it is your 2021 Mazda 3's roof that lowers the weight capacity. My recommended roof rack for your Mazda 3 will consist of the following items: Yakima CoreBar Crossbars - Steel -...
view full answer... - Canoe Carrier Recommendation for a 2017 Jeep Grand CherokeeThanks for your kind words! For a great carrier for a 16' canoe on your 2017 Jeep Grand Cherokee Trailhawk, I recommend using the Yakima KeelOver Canoe Carrier # Y04069. The KeelOver comes with a simple, tool free installation onto your crossbars and already includes all the straps you need to secure your canoe. For your canoe length, you will be able to adjust your crossbars to the required spread of 30" apart. As far as crossbar compatibility, the KeelOver clamps around crossbars that...
view full answer... - Length of Crossbars Needed on ARE Cap for Thule Hullavator & Motion XT Cargo BoxYou can mount the Thule Motion XT Rooftop Cargo Box # TH629806 and Thule Hullavator Pro Kayak Carrier # TH898 on your Tacoma's ARE truck cap with Yakima tracks, but the 60 inch bars aren't wide enough. The Motion XT is 36" wide and the Hullavator takes up 28-1/2" of crossbar space so there isn't quite enough room for both to fit comfortably. What you will need instead are the 70" crossbars, the Yakima JetStream Crossbars 70" Long - # Y00427. Since you already have the tracks, the other...
view full answer... - Carrying A Yakima LockNLoad Platform On 2007 Chevy SuburbanThe Yakima LockNLoad Platform Roof Tray - Aluminum - 84" Long x 54" Wide, part # Y05048, needs a roof rack in order to attach to your 2007 Chevy Suburban. Your vehicle's roof either has raised rails or fixed points, so it has two separate roof rack fits. Each option has a maximum weight limit of 165lbs. Please keep this in mind because the weight of the rack and the accessories are part of the maximum weight limit and the LockNLoad Platform weighs 70lbs and the roof rack will weigh approximately...
view full answer... - Yakima HD Bar Roof Rack For A 2022 Lexus GX 460 With Factory Raised Rails And Fixed Mounting PointsYes, you certainly can use the fixed mounting points on the factory rails of your 2022 Lexus GX 460 to mount Yakima HD crossbars. To do so you will need the following parts; Crossbars - Yakima HD 55" # Y01156 Towers - Yakima Skyline # Y53TR HD Bar Adapter # Y03541 Landing Pad # Y25ZR The 55" HD bar will have minimal overhang on a 2022 Lexus GX 460. it will have a very nice clean, factory look once installed.
view full answer... - How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback WagonThe Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
view full answer... - Yakima Towers Needed to Mount to Landing Pad 1 on Track SystemIt looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If...
view full answer... - Buying ONLY The Yakima Landing Pad 19 For A 2017 Cadillac XT5Yes, if you bought the part # Y00245 that will come with just the landing pad! If you have all the other Yakima components # Y00421 and # Y53TR you will be good to install! Check and see if you have I've included an install video for you!
view full answer... - How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
view full answer... - Roof Rack for 2012 Ford Transit Connect with Longer CrossbarsThe longest crossbar roof rack we have for your 2012 Ford Transit Connect is the Yakima Roof Rack # Y01156, # Y53TR, # Y03541, and # Y00233 which comes with a similar square HD crossbar to the Rhino Rack you mentioned. This rack will give you 55 inch crossbars.
view full answer... - What Length of Yakima JetStream Crossbars is Recommended for 2012 Subaru Forester Roof RackFor your 2012 Subaru Forester Yakima recommends the 50 inch Jetstream bars if you have the raised roof rails. You'd need the roof rack components # Y00425 and # Y33TR to complete the rack. If instead you don't have roof rails you'd still need 50 inch Jetstream bars with the components # Y00425, # Y53TR, and # Y00233 and you'd be set! I attached an install video that shows a Yakima JetStream roof rack installed on a similar Subaru Forester for you to check out as well.
view full answer... - Recommended Fixed Point Roof Rack For 2015 Mazda CX-9 Naked RoofThere are a couple options to fit the fixed mounting points of your 2015 Mazda CX-9. I recommend the Thule Rack consisting of: Thule WingBar Load Bars - Aluminum - Black - 53" - Qty 2 # TH711420 Thule Podium Foot Pack for Aero Bars # TH460R Thule Fit Kit for Podium Style Foot Pack, # THKIT3069 We also have the Yakima rack which also has a great reputation consisting of: Yakima JetStream Crossbars - Aluminum- 60" Long - Qty 2 # Y00426 SkyLine Towers for Yakima Crossbars - Fixed Mounting...
view full answer... - Bike Carrying Recommendations for 2012 Mazda 3 HatchbackThe Yakima Roof Rack which uses the LandingPad 11 (consisting of parts # Y00408, # Y00124 and # Y00233) is designed so that the crossbar and feet are quickly and easily removable, but the LandingPad would remain on the roof. The remainder of the offerings would connect directly to the fixed mounting points on the vehicle roof. It's possible to remove this type of rack when it's not being used, but it's a bit of an undertaking. Given your concern regarding leaving the LandingPad in place,...
view full answer... - Roof Rack Recommendation for 2016 Subaru WRX STiWe do offer some roof rack fits for your 2016 Subaru WRX, but the SportRack # SR1003 you had looked at wouldn't be a fit for your vehicle. The specific rack needed will depend on if your WRX is the sedan or hatchback model. For a sedan model, our most cost-effective alternative would be a square bar roof rack from Rhino-Rack, which would consist of the following parts: Euro style crossbars, part # RREB118B Roof rack feet, part # RRRLKVA Euro bar adapter, part # RREB-FK1 Vehicle specific...
view full answer... - Can a Pelican Trailblazer 100NXT Kayak Use a Malone J-Style Kayak Carrier on a 2012 Subaru ForesterFrom what I could find on your Pelican Trailblazer 100NXT kayak, you should have no problem transporting it on your 2012 Subaru Forester using a Malone J-Style Kayak carrier like the Malone FoldAway # MAL98FR. The Pelican Trailblazer 100NXT kayak has a pretty standard shaped hull and weighs 36 lbs., therefore the Malone FoldAway Kayak Carrier # MAL98FR will work to carry your kayak. The # MAL98FR has a weight capacity of 75 lbs. You will need crossbars on your Forester to use the Malone...
view full answer... - 2016 Mazda CX5 Yakima Roof Rack RecommendationFor your 2016 Mazda CX-5 with a naked roof you would need the following Yakima components to complete a roof rack: Round 48" CrossBars # Y00408 (you most likely already have these) SkyLine Towers # Y53TR RoundBar SL Adapter # Y03536 LandingPad 11 for Yakima Control Towers # Y00233
view full answer... - 2010 Mitsubishi Outlander Roof Rack and Kayak Carrier RecommendationFor a Yakima roof rack to fit your 2010 Mitsubishi Outlander that has factory fixed points for a roof rack you are going to need two sets of the Landing Pad 11 part # Y00233, SkyLine Towers part # Y53TR, RoundBar SL Adapter part # Y03536 and 48 inch crossbars # Y00408. I attached a picture I got from Yakima that shows this rack installed on a similar Outlander as yours. The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit this rack well.
view full answer...
- Availability of a Roof Cargo Basket For 2011 Ford Transit Connect With Fixed Factory Roof MountsI would recommend to use the Yakima Roof Rack System with a Yakima cargo basket. For the roof rack, you will need 3 parts: Landing Pad 11, # Y00233 SkyLine Towers, # Y53TR RoundBar SL Adapter, # Y03536 Round 48 Inch CrossBars for Yakima Roof Rack System, # Y00408 I am including a link to a video review on the Yakima roof rack system. With the Yakima roof rack installed on your vehicle you can then install the Yakima LoadWarrior Roof Rack Cargo Basket, part # Y07070-74. I am including...
view full answer... - Roof Rack Recommendation for 2016 Mazda CX-5 for Carrying Yakima Skybox 16For your 2016 Mazda CX-5 the Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00233 would be an excellent option for your vehicle to carry a Yakima Skybox NX 16 part # Y95AV. This is the quietest and highest quality racks that fit your vehicle.
view full answer... - Roof Rack and Kayak Carrier Recommendations for 2003 Mazda Protégé 5You'll need to begin by adding a roof rack to your Mazda, which consists of the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 11 for Yakima Control Towers - Qty 4 # Y00233 Once the rack's in place, the # Y04074 SweetRoll Kayak carrier would be an excellent choice for you. Tie straps for the kayak to the crossbars and for the bow/stern are included.
view full answer... - Roof Rack Landing Pads Recommendation for a 2011 Mazda 2The Yakima landing pads that are recommended for your 2011 Mazda 2 would be the LandingPad 11 for Yakima Control Towers # Y00233. If you want the rest of the rack components you would also need the following: Round 48 Inch Cross Bars Pair # Y00408 Yakima SkyLine Towers Roof Rack Feet # Y53TR RoundBar SL Adapter, part # Y03536
view full answer... - Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting PointsFor the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
view full answer... - Recommended Roof Rack For a 2013 Ford Transit ConnectI recommend the Yakima HD roof rack for your 2013 Ford Transit Connect. This will consist of the Crossbars # Y01156, Towers # Y53TR, Adapters # Y03541 and Fit Kit # Y00233. I prefer this option as the bars have a versatile design to accept either track or clamp on accessories plus the endcap has an integrated tie-down point to help secure your cargo.
view full answer... - Which Roof Rack and Multi-Kayak Carrier can be Used With a 2012 Mazda 3 Hatchback?We can get you set up to transport a pair of 10-foot kayaks on your 2012 Mazda 3 hatchback. For a roof rack, I recommend going with the Yakima; it has aero crossbars, # Y00425, which are used in conjunction with the Landing Pad # Y00233 and Skyline Towers # Y53TR that install onto fixed mounting points on your Mazda's roof. To transport your 10-foot kayaks on the Rhino Rack, you can use the Thule The Stacker # TH830. It mounts directly onto the crossbars and utilizes a combination of...
view full answer... - Recommended Heavy Duty Roof Rack for a 2018 Ford FlexIt sounds like you might be looking for a roof rack for your 2018 Ford Flex that is both long and heavy duty. If that is the case then the best option for you is going to be dependent on your roof construction. If you have a bare roof then I recommend using the Yakima HD Crossbar System which is composed of part # Y01157, part # Y53TR, part # Y03541, and part # Y00233. If you have raised side rails then I also recommend the Yakima HD Crossbar System but this is composed of part # Y01157,...
view full answer... - Yakima Roof Rack Components Needed For A 2015 Kia SoulIdk exactly how you got to that specific page but it's only including the Yakima JetStream crossbars # Y00425 and Landing Pads for Yakima SkyLine and Control Towers # Y00233 and does not include the towers needed. For a 2015 Kia Soul with a naked roof you would need the following components: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 22...
view full answer...
- Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster CitySince the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
view full answer... - Recommended Roof Rack for Bikes On a 2017 Subaru ImprezaIn order to carry bikes on the roof of a 2017 Subaru Impreza you'll need a roof rack, the Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00248 for hatchback or part # Y00233 for sedan models is what I recommend. Then for a bike rack, the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 is a great option that wont require you to remove the wheel.
view full answer... - Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point RoofThe difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
view full answer... - Parts Needed to Adapt Yakima Roof Rack for a Ford Taurus X to a 2012 Ford FlexTo install a roof rack system on your 2012 Ford Flex, you will need a set of SkyLine Towers, # Y53TR, a set of RoudBar Adapters, # Y03536, and the landing pads, # Y00233. Along with a set of Yakima CrossBars. Yakima recommends 58 inch CrossBars, # Y00409. If your previous Taurus X used 58 inch CrossBars, my research shows it most likely does, then you would not need to purchase new CrossBars.
view full answer... - Which Yakima Roof Rack Fits 2014 Mazda CX-5 with Raised Side RailsFor your 2014 Mazda CX-5 with Raised Side Rails we offer several Yakima roof rack options you can see on the linked page. I recommend the Core Bar rack system made of parts # Y00421 and # Y33TR. This costs the same as a basic round bar rack but it will create less wind noise thanks to the bars' more aerodynamic shape. I've linked you to some FAQ articles about roof racks and their available accessories.
view full answer... - Recommendation for Carrying 4 Bikes on BMW 535iThe 2015 BMW 5 Series will use a Class I trailer hitch like the Curt trailer hitch # C11381. Due to their limited tongue weight capacity Class 1 trailer hitches are limited to carrying 2 bikes so you won't be able to carry four bikes with the Swagman Titan Bike Rack # S63410. The limited tongue weight capacity (maximum amount of downward force that can be safely applied to the hitch) is one reason, but additional bikes after the first two move the load further rearward away from the receiver...
view full answer... - Roof Rack Recommendation to Fit Factory Fixed Mounting Points of 2016 Mazda 3 SedanFor your 2016 Mazda 3 Sedan with factory fixed mounting points we have a fit but it is not the Rola you referenced. Instead you would need the Yakima kit part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which is a confirmed fit.
view full answer... - Roof Rack for 2012 Ford Transit Connect with Longer CrossbarsThe longest crossbar roof rack we have for your 2012 Ford Transit Connect is the Yakima Roof Rack # Y01156, # Y53TR, # Y03541, and # Y00233 which comes with a similar square HD crossbar to the Rhino Rack you mentioned. This rack will give you 55 inch crossbars.
view full answer... - What Length of Yakima JetStream Crossbars is Recommended for 2012 Subaru Forester Roof RackFor your 2012 Subaru Forester Yakima recommends the 50 inch Jetstream bars if you have the raised roof rails. You'd need the roof rack components # Y00425 and # Y33TR to complete the rack. If instead you don't have roof rails you'd still need 50 inch Jetstream bars with the components # Y00425, # Y53TR, and # Y00233 and you'd be set! I attached an install video that shows a Yakima JetStream roof rack installed on a similar Subaru Forester for you to check out as well.
view full answer... - Recommended Fixed Point Roof Rack For 2015 Mazda CX-9 Naked RoofThere are a couple options to fit the fixed mounting points of your 2015 Mazda CX-9. I recommend the Thule Rack consisting of: Thule WingBar Load Bars - Aluminum - Black - 53" - Qty 2 # TH711420 Thule Podium Foot Pack for Aero Bars # TH460R Thule Fit Kit for Podium Style Foot Pack, # THKIT3069 We also have the Yakima rack which also has a great reputation consisting of: Yakima JetStream Crossbars - Aluminum- 60" Long - Qty 2 # Y00426 SkyLine Towers for Yakima Crossbars - Fixed Mounting...
view full answer... - Bike Carrying Recommendations for 2012 Mazda 3 HatchbackThe Yakima Roof Rack which uses the LandingPad 11 (consisting of parts # Y00408, # Y00124 and # Y00233) is designed so that the crossbar and feet are quickly and easily removable, but the LandingPad would remain on the roof. The remainder of the offerings would connect directly to the fixed mounting points on the vehicle roof. It's possible to remove this type of rack when it's not being used, but it's a bit of an undertaking. Given your concern regarding leaving the LandingPad in place,...
view full answer... - Roof Rack Recommendation for 2016 Subaru WRX STiWe do offer some roof rack fits for your 2016 Subaru WRX, but the SportRack # SR1003 you had looked at wouldn't be a fit for your vehicle. The specific rack needed will depend on if your WRX is the sedan or hatchback model. For a sedan model, our most cost-effective alternative would be a square bar roof rack from Rhino-Rack, which would consist of the following parts: Euro style crossbars, part # RREB118B Roof rack feet, part # RRRLKVA Euro bar adapter, part # RREB-FK1 Vehicle specific...
view full answer... - Can a Pelican Trailblazer 100NXT Kayak Use a Malone J-Style Kayak Carrier on a 2012 Subaru ForesterFrom what I could find on your Pelican Trailblazer 100NXT kayak, you should have no problem transporting it on your 2012 Subaru Forester using a Malone J-Style Kayak carrier like the Malone FoldAway # MAL98FR. The Pelican Trailblazer 100NXT kayak has a pretty standard shaped hull and weighs 36 lbs., therefore the Malone FoldAway Kayak Carrier # MAL98FR will work to carry your kayak. The # MAL98FR has a weight capacity of 75 lbs. You will need crossbars on your Forester to use the Malone...
view full answer... - 2016 Mazda CX5 Yakima Roof Rack RecommendationFor your 2016 Mazda CX-5 with a naked roof you would need the following Yakima components to complete a roof rack: Round 48" CrossBars # Y00408 (you most likely already have these) SkyLine Towers # Y53TR RoundBar SL Adapter # Y03536 LandingPad 11 for Yakima Control Towers # Y00233
view full answer... - 2010 Mitsubishi Outlander Roof Rack and Kayak Carrier RecommendationFor a Yakima roof rack to fit your 2010 Mitsubishi Outlander that has factory fixed points for a roof rack you are going to need two sets of the Landing Pad 11 part # Y00233, SkyLine Towers part # Y53TR, RoundBar SL Adapter part # Y03536 and 48 inch crossbars # Y00408. I attached a picture I got from Yakima that shows this rack installed on a similar Outlander as yours. The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit this rack well.
view full answer... - Availability of a Roof Cargo Basket For 2011 Ford Transit Connect With Fixed Factory Roof MountsI would recommend to use the Yakima Roof Rack System with a Yakima cargo basket. For the roof rack, you will need 3 parts: Landing Pad 11, # Y00233 SkyLine Towers, # Y53TR RoundBar SL Adapter, # Y03536 Round 48 Inch CrossBars for Yakima Roof Rack System, # Y00408 I am including a link to a video review on the Yakima roof rack system. With the Yakima roof rack installed on your vehicle you can then install the Yakima LoadWarrior Roof Rack Cargo Basket, part # Y07070-74. I am including...
view full answer... - Roof Rack Recommendation for 2016 Mazda CX-5 for Carrying Yakima Skybox 16For your 2016 Mazda CX-5 the Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00233 would be an excellent option for your vehicle to carry a Yakima Skybox NX 16 part # Y95AV. This is the quietest and highest quality racks that fit your vehicle.
view full answer... - Roof Rack and Kayak Carrier Recommendations for 2003 Mazda Protégé 5You'll need to begin by adding a roof rack to your Mazda, which consists of the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 11 for Yakima Control Towers - Qty 4 # Y00233 Once the rack's in place, the # Y04074 SweetRoll Kayak carrier would be an excellent choice for you. Tie straps for the kayak to the crossbars and for the bow/stern are included.
view full answer... - Roof Rack Landing Pads Recommendation for a 2011 Mazda 2The Yakima landing pads that are recommended for your 2011 Mazda 2 would be the LandingPad 11 for Yakima Control Towers # Y00233. If you want the rest of the rack components you would also need the following: Round 48 Inch Cross Bars Pair # Y00408 Yakima SkyLine Towers Roof Rack Feet # Y53TR RoundBar SL Adapter, part # Y03536
view full answer... - Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting PointsFor the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
view full answer... - Recommended Roof Rack For a 2013 Ford Transit ConnectI recommend the Yakima HD roof rack for your 2013 Ford Transit Connect. This will consist of the Crossbars # Y01156, Towers # Y53TR, Adapters # Y03541 and Fit Kit # Y00233. I prefer this option as the bars have a versatile design to accept either track or clamp on accessories plus the endcap has an integrated tie-down point to help secure your cargo.
view full answer... - Which Roof Rack and Multi-Kayak Carrier can be Used With a 2012 Mazda 3 Hatchback?We can get you set up to transport a pair of 10-foot kayaks on your 2012 Mazda 3 hatchback. For a roof rack, I recommend going with the Yakima; it has aero crossbars, # Y00425, which are used in conjunction with the Landing Pad # Y00233 and Skyline Towers # Y53TR that install onto fixed mounting points on your Mazda's roof. To transport your 10-foot kayaks on the Rhino Rack, you can use the Thule The Stacker # TH830. It mounts directly onto the crossbars and utilizes a combination of...
view full answer... - Recommended Heavy Duty Roof Rack for a 2018 Ford FlexIt sounds like you might be looking for a roof rack for your 2018 Ford Flex that is both long and heavy duty. If that is the case then the best option for you is going to be dependent on your roof construction. If you have a bare roof then I recommend using the Yakima HD Crossbar System which is composed of part # Y01157, part # Y53TR, part # Y03541, and part # Y00233. If you have raised side rails then I also recommend the Yakima HD Crossbar System but this is composed of part # Y01157,...
view full answer... - Yakima Roof Rack Components Needed For A 2015 Kia SoulIdk exactly how you got to that specific page but it's only including the Yakima JetStream crossbars # Y00425 and Landing Pads for Yakima SkyLine and Control Towers # Y00233 and does not include the towers needed. For a 2015 Kia Soul with a naked roof you would need the following components: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 22...
view full answer... - Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster CitySince the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
view full answer... - Recommended Roof Rack for Bikes On a 2017 Subaru ImprezaIn order to carry bikes on the roof of a 2017 Subaru Impreza you'll need a roof rack, the Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00248 for hatchback or part # Y00233 for sedan models is what I recommend. Then for a bike rack, the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 is a great option that wont require you to remove the wheel.
view full answer... - Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point RoofThe difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
view full answer... - Parts Needed to Adapt Yakima Roof Rack for a Ford Taurus X to a 2012 Ford FlexTo install a roof rack system on your 2012 Ford Flex, you will need a set of SkyLine Towers, # Y53TR, a set of RoudBar Adapters, # Y03536, and the landing pads, # Y00233. Along with a set of Yakima CrossBars. Yakima recommends 58 inch CrossBars, # Y00409. If your previous Taurus X used 58 inch CrossBars, my research shows it most likely does, then you would not need to purchase new CrossBars.
view full answer... - Which Yakima Roof Rack Fits 2014 Mazda CX-5 with Raised Side RailsFor your 2014 Mazda CX-5 with Raised Side Rails we offer several Yakima roof rack options you can see on the linked page. I recommend the Core Bar rack system made of parts # Y00421 and # Y33TR. This costs the same as a basic round bar rack but it will create less wind noise thanks to the bars' more aerodynamic shape. I've linked you to some FAQ articles about roof racks and their available accessories.
view full answer... - Recommendation for Carrying 4 Bikes on BMW 535iThe 2015 BMW 5 Series will use a Class I trailer hitch like the Curt trailer hitch # C11381. Due to their limited tongue weight capacity Class 1 trailer hitches are limited to carrying 2 bikes so you won't be able to carry four bikes with the Swagman Titan Bike Rack # S63410. The limited tongue weight capacity (maximum amount of downward force that can be safely applied to the hitch) is one reason, but additional bikes after the first two move the load further rearward away from the receiver...
view full answer... - Roof Rack Recommendation to Fit Factory Fixed Mounting Points of 2016 Mazda 3 SedanFor your 2016 Mazda 3 Sedan with factory fixed mounting points we have a fit but it is not the Rola you referenced. Instead you would need the Yakima kit part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which is a confirmed fit.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.