Yakima LockNLoad Platform Rack for Fixed Mounting Points - SkyLine Towers - Aluminum
Item # Y87PB
Our Price: $955.75
Confirmed to Fit
2011 Jeep Grand Cherokee
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (70)
- Q & A (0)
- Videos (16)
- Photos
Yakima Roof Rack - Y87PB
- Platform Rack
- Requires Fit Kit
- Yakima
- 55L x 49W Inch
Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima off-road and traditional roof rack accessories.
Features:
Yakima LockNLoad Platform K, 55x49:- Rugged platform lets you build a large aftermarket roof rack that's perfect for off-road use
- Pair with Yakima towers and SL adapters to create a complete roof rack
- Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets
- Perfect for road trips, camping, and overlanding - a great fit for any outdoor lifestyle
- Horizontal slats accommodate clamp-on accessories like bike racks, kayak carriers, or a rooftop tent
- Integrated channels accommodate various off-road accessories (sold separately)
- Compatible with perimeter rails, off-road lights, jack holders, spare tire carriers, jerry can holders, and more
- Built-in wind deflector reduces wind noise and drag
- Rugged construction designed for off-road use and tested in the Australian Outback
- Aluminum frame with black powder coat is durable and rustproof
- Assembly required
Yakima Landing Pad 18 Fit Kit:
- Provide mounting points for Yakima SkyLine or Control towers
- Pads install in the fixed mounting points inside your vehicle's flush, factory side rails
- Protect your vehicle from scratches with UV-resistant, rubber base pads
- Include snap-on covers for protection when towers are not in place
Yakima LockNLoad SL Adapters:
- Heavy-duty adapters let you mount a LockNLoad platform directly to Yakima SkyLine, TimberLine or TrackTower towers
- Requires 1 set of adapters for each pair of towers in your application
- Works with all platform sizes
- Structural steel construction with black powder coat is durable and rustproof
- Simple bolt-on installation with included hardware
- Secure the adapters directly to towers and then attach to platform mounting points
Yakima SkyLine Towers:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000244 Landing Pad 18 for Yakima SkyLine and Control Towers - Qty 4
8005042 LockNLoad SL Adapters for Yakima SkyLine, TimberLine and TrackTower Towers - Qty 2
8005044 Yakima LockNLoad Heavy-Duty Roof Rack Platform - Size K - Aluminum - 55" Long x 49" Wide
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Yakima LockNLoad Platform Rack for Fixed Mounting Points - SkyLine Towers - Aluminum
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Roof Rack Review - 2021 Jeep Grand Cherokee
Hey, everybody, welcome to etrailer.com I'm Bobby and today we're taking a look at the Yakima JetStream Aero Bars here on our 2021 Jeep Grand Cherokee. Now, guys, this is gonna be an excellent way of giving yourself a very nice roof rack system. Yakima, of course, very known for their roof rack system. You also do have a very nice style on these guys here today. Now, in my opinion, they do sit just a little bit high because of these skyline towers that we're also utilizing. However, that is also because of our rails here today.
So we are actually working with some raised rails here with a chrome and black finish. So make sure you are getting your appropriate roof rack also put in our fit guide. You guys might just have a little bit something different. If you are working on your 2021 Jeep Grand Cherokee, make sure you do have that same rail system we're working on here today. However, of course, Yakima has a lot of different fit kits.
So these bars are still gonna work. It might be just a little bit different of getting your bars on your vehicle. But these guys are gonna be a great way of giving you a great option of getting some accessories on here. We're gonna have no trouble getting kayak carriers, roof baskets, anything that you might think you need to put up on there, we should be able to do a great job with it. You're getting a lot of great clearance as well.
So yeah, it's a little high, however, don't think we're gonna be limited by any of our accessories. Now we are on our 50 inch bars here today and we have them evened out, so you actually do have pretty good spacing here. You get about four inches. A lot of those kayaks with load assist need about four to eight inches. So if you're looking for overhang, we actually could shift it a little bit this way as well.
However, you are gonna be just a little uneven if you do that, of course. So your passenger side or your driver's side, it can be shifted too. But if you're going for that look, and you want a little bit of overhang, just go ahead, look at some of our longer bars here today. These are the 50-inchers just to give you guys an idea. They also do have that nice black of course, but they do come in silver. So if you're wanting to match your vehicle color as well, you can do so. Talking about what they're made of as well, they are an aluminum make, so they're not gonna be rusting or corroding. And with that, they also do have a black powder coat finish on them. So as long as we're treating it well, we're keeping ourselves from banging and nicking it and dinging it, it can hold up quite well. Just keep in mind that black powder coat, guys, if you aren't treating it well, you can end up kind of scraping it off. So just keep that in mind. Try to be nice with it. Try to get your things up on there in a concise manner. It'll start lasting you for the years to come, which is gonna be great. You also are gonna get 165 pounds of weight capacity on here, which should be plenty for getting most of the things we need. Of course, make sure you are checking with your vehicle's owner's manual guide to make sure that our roof can handle that. Now that is your dynamic use, so that's when it's actually in use. If you're looking to put some tents up on here and you're thinking, "Well, man, I can't get up on there." Your static is gonna be way higher than that. This is just for when you actually are moving and transporting your things while the vehicle is in motion. Well, the installation of this guy doesn't take too much time at all. I actually am a really big fan of how this system works and I think you guys will be too once you see how that gets in place. So let's go ahead, see how we got this on our roof. To go ahead and start our install, guys, we're gonna actually need to start on the top of our car here. Now you are gonna have these little bolts in place. So in the very back here, we've gone ahead and already removed that. Remember that torque bolt does come included with your pad system. To go ahead and get those removed, Of course, lefty loosey, get those guys right out of there. Then we're gonna go ahead and take our pad. Now, one thing we're gonna be looking for, these arrows need to be pointed away from our vehicle or towards the outside if we're looking at it. Then we can go ahead and take our spacer, start slotting it on top there. we're gonna take our included bolt and our washer set, swinging our flat washer towards the bottom and that locking towards the head of our bolt. And then we can simply slot that in place here and simply get it aligned right there and start tightening this down. As we get closer, make sure you use your included tool so you don't over-tighten. Once you hear that click, we know we're nice and secure. For the second part of our installation guys, we're gonna go ahead and start working on getting our system set up. So we're gonna start with our skyline towers here today. Now you guys might have to actually add this little metal element here, this little plastic spacer. It's really easy to add. What I like to do, we'll go ahead and give you guys an idea of how it's actually mounted in there. You can see where it's actually catching on that little latch right there, so it's easy to go ahead, put one of your crescents in and then put the other side, it'll clip right in place, get it set. To actually getting this guy tightened down on the other side here, we are gonna have a little exposed Allen wrench guy. All you gotta do, loosen it if you need to, of course, and then just tighten that bolt in to your metal spacer here. And this is actually what's gonna be going on our T track here, guys. So nice that we can go ahead and quickly get that installed. Really takes no time at all. Just go ahead and put that guy in. Of course, we can go ahead and replace our plastic covering here. Go ahead and get one side set, lock it down. Then we can go ahead and start getting our tower ready, guys. All we have to do, start setting this guy on there. And all we have to do is start getting this T slot set up. So it's nice to go ahead, keep it a little loose like yourself for that, and then just to start fitting in both our plastic and our metal ends right onto that T slot attachment right there, guys. So we can go ahead and start sliding it. Now at this point, we could go ahead and start measuring our spread on our vehicle. I find the best thing to do, try to get it to where you think it's gonna be. And then we can actually start seating these guys in there and then adjusting your bar while it's on there. I just, time and time again, you sit there and try to get a measurement and you're like, "I think I got it," and then you got to put it on there, just doesn't quite work out. So I think the best thing to do, get it to where you can just barely slide it. That way, when we can find that measurement, we can go ahead and take our bar off and start tightening things down. Now things might be a little different at home here too. Once we actually find that positioning, you also are gonna have this little strip here. So kind of jumping forward a little bit, but once we actually have these towers set, which we're about to do, you can go ahead and start cutting the strip to length, guys. No, we're not gonna do that here today of course, just because somebody at home might be getting this rack and they might be on a different vehicle. But all it is, just snip it, get that lined up and start filling in this hole. That's gonna do a great job of really reducing that wind noise you're gonna feel. Otherwise you're gonna have a very severe whistle as it does get on the road. It starts getting those high miles that you are- Sorry, miles per hour you'll be going, so that speed, really gonna start feeling that wind. So let's go ahead and start throwing this guy up on there, and start getting aligned. To start getting this on here, guys, all we want to do is start laying it across our roof like this. Of course, being gentle with it is gonna be nice. And really all I want to do is start fitting this in. So you guys can see as that's closed these little tabs go out, so we're just gonna be sitting that right in there. So make sure it's going down towards you. Start getting that set and locking in our patch just like so. So let's go ahead and repeat the process on the other side and make sure our bars are in the correct position. To go ahead and actually get these aligned properly, you guys can see we have a little bit of an overhang here to our left. Now of course, we can go ahead and start measuring, but I like to start eyeballing it a little bit here. So I'm gonna go ahead, shift it just a bit for myself like so. Then I can go ahead, grab my tape measure, and just from that edge of our skyline there to the very end, putting this about four and a half inches there on our passenger side right now. It looks like I'm gonna have to come back just a little bit towards our driver, but that's okay. And about four, right under four inches there. So I'm gonna come just a quarter of an inch back, like so. And double-checking myself here. Sorry guys, I know I just blocked you on that side. So about four and a half on this side. Now I might be over-correcting just a little bit. But of course, only takes me two seconds to walk across and really get them aligned. And that's gonna be right at four as well. So four inches. That way we can go ahead, give ourselves just a tad bit this way. So that's putting us at four and a half. While this guy is right at four. So again, we'll go ahead, try to go for that quarter just right there. Now we're gonna be perfectly aligned, as I did have that half inch. So we're aligned. All we got to do, tighten down with our included tool so we're nice and secure. Once we hear that clack, we know we're perfectly aligned and we can bring up our plate. I think we're a little misaligned here, guys. Let me go ahead and reseat that guy. Make sure it's pro-, there we go. Seated properly there now. You can see we are nice and secure on that bar. Now we are in our final stages here. At this point, like we talked about before, I would go ahead and add my stripping. All we have to do there, guys, pop open that latch, like so. You actually take this entire system out, which makes it really easy to add that stripping in. Then we can just walk our bar right back up, clip it in place, we'll be nice and secure again for ourselves. Of course, be sure to be adding your little caps here at the very end as well. Try not to drop them like me. But then we can go ahead and make sure that's nice and secure, That way you have it so we don't have anything getting on the inside of our bars. Well, now that our installation is complete, we can go ahead, hop up, take a closer look at the bars and how they interact with our roof. Now of course you do have that really nice aero look. So you're getting that wind spread across here in the front tailoring down to the back. Gives it that nice sleek look. Got the little Yakima on there, of course, getting that style points for itself. However, it doesn't just stop there with looks. I really do like how this system works. The big thing for me is this little T slot channel at the top here. So a lot of times, guys, this little stripping in here on a lot of the different carriers you might see out there requires you to cut it or get it out of there, and then you have to resize everything, and then you're trying to fill in those holes just like we we're talking about with that kind of whistle noise from that bottom side there. What's nice with this guy, though, we didn't do any cutting. All we had to do, take our T slot and start slotting it in right at the bottom there. So all we have to do is push it and it actually will conform to that T slot. You guys can see my fingers sliding down in there and then actually hold right there. So what's great about that, as we said, no cutting, no whistling, a lot less aggravation actually getting your accessories on there, which I do love to see. So go ahead, slap that guy back on. But a couple things we're gonna look at here. what kind of height we're adding onto our car, of course. Maybe we want to pull this in the garage or at least get through those drive-throughs wherever we might be going. So it is gonna be important to keep in mind exactly what we're working with here. And from the very top of our corrugate of our roof to the top of our bar here is gonna be putting us right at five and, right at five inches actually there, guys. So just maybe a hair over it. While our clearance for the bottom here is gonna be actually just under four inches. So you've got about an inch of a bar there, guys, so right under four and right over five for our max height. And of course, that under four is you're gonna be your clearance issue. Now that's only gonna be an issue, of course, at your corrugate and for getting your accessories on there. Now, working with a lot of rooftop accessories, I hadn't really seen anything that needs you to have this much of clearance. So I think all of us are gonna have a great time getting anything that we need up on these guys. Not to mention, with that T slot up top, should be giving us no trouble at all. Well as you guys saw, I've got a lot of good clearance there on our bars. Now, of course, like we said, they are a little tall. However, I think that fits well with our Jeep here, the Grand Cherokee already somewhat of a larger vehicle. So I don't think it's too out of place. Maybe on the sedan these will be a little tall, but I think we are in a pretty good look here for ourselves today. Now one last little great thing about Yakima. Right here, guys, you probably have noticed these little holes. So right now they're not really doing too much for us, but say we want to go ahead and keep it from anybody just doing this to our roof rack. We can go ahead and grab ourselves some locking cores from Yakima available here at etrailer.com. One great little thing about this as well, guys, say you have a Yakima rooftop bike carrier, you can go ahead and actually get that locking core keyed alike utilizing Yakima's same key system. Not only that, if we had any hitch accessories, anything that we might have a Yakima locking core for, we can go ahead and start getting them keyed alike, making ourselves just to have one little key which is great for this system, 'cause I like it if we going ahead, if we're looking at getting a bunch of accessories, can be nice to go ahead, just get them all in that Yakima field and that way you just have one key for all the things that we need to make our trip successful and fun. Well, guys, I think that that's gonna do it for our look here at the Yakima JetStream 50 inch crossbars here on our 2021 Jeep Grand Cherokee. I'm Bobby. Thank you for watching..
Customer Reviews
Yakima LockNLoad Platform Rack for Fixed Mounting Points - SkyLine Towers - Aluminum - Y87PB
Average Customer Rating: 4.8 out of 5 stars (70 Customer Reviews)
Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima off-road and traditional roof rack accessories.by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: David 02/23/2023
2018 Jeep Grand Cherokee
The landing Pad 18 was very easy to install on my 2015 Jeep Grand Cherokee and fit up nicely with my Yakima SkyLine towers.
by: Dan 11/06/2023
Great company. Fast delivery.
by: Michael09/04/2021
2008 GMC Yukon XL
I am going to include the Landing Pads, Skyline Towers, LockNLoad adapters, and Pivoting Mounts that are all required for my vehicle in this review of the 84" x 54" LockNLoad Platform. First, I had done months of research trying to figure out what would work and meet my needs for a 2008 GMC Yukon XL. Without the help of etrailer's agent, Ashley, I'd probably still be trying to figure things out! Ashley was patient and thorough, she made sure I had all the parts I needed for a fairly complex (and large!)project. I cannot thank her enough!
On to the assembly and installation: Ashley confirmed that following instructions was key to efficient building - I found that combining online instructions with the included hard copies worked best. As an example, the online fastener images and descriptions are far better than the paper ones. Then, having the paper instructions in hand made "in the moment" progress much faster. All of the Yakima parts fit together perfectly, and by methodically following the instructions (I cannot stress this enough!), including pre assembling Landing Pads, Towers, and Pivoting Mounts, there was no need to backtrack. Once I had a day to devote to the project, everything went very smoothly. Placing the large Platform on the mounts does require two people, but the rest was easy for one fairly handy person to accomplish. Making adjustments to be sure the Platform is centered and square to the roof took some time but it's worth it in the end. Again, thanks to etrailer and particularly Ashley! It was a pleasure doing business with you!
by: Joshua09/05/2019
Amazing quality easy set up fast shipping buy the locks the 4 pack With this fast shipping super impressed
by: Joseph 04/17/2021
2014 Jeep Grand Cherokee
I bought a 2014 Jeep Grand Cherokee. To use my Yakima Skyline Towers, I had to install these landing pads in the rack rail attached to the roof. The installation was easy, and the pads serve their purpose. But they don't seem to be engineered as secure as I would like. They have more flexibility than I think they should. The bolt head is over an inch from where it screws into the roof. I think Yakima could have engineered something more secure. In fairness to Yakima, the Jeep rack rail is different than any other rack system I've seen and is incompatible with any other system. But I am assuming that these landing pads will work OK with a full load and that the Yakima engineers have done an adequate job. This summer they will be put to the test for 3,000 miles. Note: the Yakima windshield fairing falls on the glass in the moon roof rendering the moon roof unopenable so long as the fairing is used.
by: Steve S.07/11/2016
Not only did etrailer have a necessary component to my new Yakima rack system that no other retailer had in stock, their price was fair and they shipped quickly. Thanks etrailer!
by: Philip 05/29/2023
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
by: Shawn11/15/2021
2019 Jeep Grand Cherokee
Love the Yakima LocknLoad 55x49 Platform.. would have been nicer if it was just a few inches longer. Fits really well on the 2019 Grand Cherokee.. and looks even better but at highway speeds (60mph+) you will hear it up there... I've also noticed .5 mpg less which is no biggie...I didn't think the Landing Pads (18) were very stable but once in place.. its rock solid!
by: John 09/25/2019
2015 Jeep Grand Cherokee
These towers (Y00148) and the Landing Pads (Y00244) are needed to mount the cross-bars on my 2015 Jeep Grand Cherokee. The Jeep has flush rails, with an open channel along the top.
They are very heavy duty, typical of Yakima stuff.
Worked great.
by: Wai10/29/2021
Jeep Grand Cherokee
Working very in my Jeep Grand Cherokee 2020. They used for the cross bar to support my roof top tent
by: Robert05/21/2021
Great design for a roof rack system.easy to put on and take off. Use it to carry 9-11 foot surf fishing rods. Takes two minutes to put on when I am ready to go fishing.
by: Steven06/10/2020
The rack looks to be excellent. The assembly is a nightmare. The instructions are terrible. The design for assembly is flawed. There is a stupid cover over the main bolt that you have to tighten. There is a video on Yakima’s website that kind of tells you how to get around it but not really. A 30 minute job took two hours.
by: DJones06/18/2018
Easy to install. Not impressed with the fit though. The biggest selling point is being able to remove the towers and leave the pad though. Overall happy with the purchase.
by: Robert10/05/2018
Flush mounting for my jeep grand cherokee '18. These were easy to install and very secure.
by: Alonzo06/05/2020
2018 Jeep Cherokee
My Yamika roof rack 2018 Grand Jeep Cherokee
I am getting compliments from my neighbors.
by: Dylan 05/20/2023
It was exactly what I ordered
by: Larry 04/16/2021
Easy to install. First roof rack.
by: Eric 09/20/2020
Perfect replacement and fast shipping !
by: William02/28/2024
by: Jonathan 08/18/2021
Got here fast, easy install.
25
349
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- What is Height of LockNLoad Platform Rack for LEER Camper Topper on a 2020 Nissan FrontierTo install the LockNLoad on your 2020 Nissan Frontier 5' Bed LEER camper topper you need the following parts: - 55" Long x 49" Wide Yakima LockNLoad Platform Roof Tray # Y05044 - TrackTowers # Y52AV - LockNLoad SL Adapter # Y05042-2 The TrackTowers sit about 2" tall and the LockNLoad is around 4" tall so you'll be adding about 6" to the height of your LEER topper which is pretty standard for a track mount platform. For something a little shorter you can use the Rhino-Rack Pioneer Platform...
view full answer... - Yakima LockNLoad Fit For 2022 Chevy Suburban With Factory Roof RackYour 2022 Chevy Suburban with factory crossbars can mount the LockNLoad, but there are no cargo boxes compatible with it, including a Roam Adventure or any other box. If you did want to use the LockNLoad for other purposes, I verified with Yakima the correct LockNLoad size as well as clamps needed to fit your '22 Suburban: - Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide # Y05044 - Two Sets Of: Crossbar Clamps for Yakima LockNLoad # Y05039 Otherwise, if you wanted...
view full answer... - How Many Crossbar Clamps Are Needed for Yakima LockNLoad Platform RackIn order to install the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide # Y05044 you will need two sets of the Crossbar Clamps for Yakima LockNLoad Platform Rack - Qty 2 # Y05039. So that will be 4 clamps total. Instead of buying them separately you can get the Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 55" Long x 49" Wide # Y05044-39 which comes with everything you need.
view full answer... - Can I Size Down From A LockNLoad Platform B To A LockNLoad Platform KYou should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part # Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems mounting the platform to your vehicle. Do keep in mind that you will need an adapter to mount this platform directly to your towers. The LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers - Qty 4, part # Y05042-2, will attach directly to your Yakima...
view full answer...
- How Can I Mount a Pioneer Platform to My RetraxPRO Hard Cover on My 2022 Ram 1500?I have an answer for you. Without knowing the exact bed size or whether you have RamBox installed on your 2022 Ram 1500, if you are looking to use a Retrax Pro model with the included rails like the RetraxPRO Hard Tonneau Cover # RTT-80245, I cannot guarantee that the Landing Pad 26 # Y75ZR fit into the dimensions of the tracks of the Retrax tonneau cover. Yakima unfortunately does not test their landing pads on other manufacturers' tracks, so there is no way to tell if the LockNLoad platform...
view full answer... - Height of Yakima LockNLoad Above Crossbar Clamps and Cargo Basket FitThe Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039 are a total of 1 inch in height, but when they are clamped around your crossbars, the LockNLoad is almost directly on the crossbars, as it attaches right to the top of the clamp. These clamps will work with the Yakima LockNLoad Platform Roof Trays like the 55" Long x 49" Wide # Y05044 or 84" Long x 54" Wide # Y05048. As for the mounts, those will not work for a LockNLoad, and while you can't mount a rooftop cargo box to...
view full answer... - How To Attach Yakima LockNLoad Platform Roof Tray To Factory Crossbars of 2020 Honda PassportThe Yakima LockNLoad Platform Roof Tray part # Y05044 will fit to your factory cross bars with 2 sets of the Crossbar Clamps for Yakima LockNLoad Platform part # Y05039. This will be as low profile as possible with the factory cross bars, the clamps are 1" tall and the platform itself is about 4" tall.
view full answer...
- How To Attach the Yakima LockNLoad To a Yakima OverHaul HD On a Toyota TacomaYes, the Crossbar Clamps for Yakima LockNLoad Roof Rack part # Y05039 is what you need to install the Yakima LockNLoad Platform Roof Rack part # Y05044 on the Yakima OverHaul HD Truck Bed Ladder Rack part # Y01151-5868 which is a confirmed fit for your 2018 Toyota Tacoma. That said, you will need to order two sets of the clamps. The Yakima OverHaul HD Truck Bed Ladder Rack when paired with the Yakima LockNLoad Platform Roof Rack is by far the best option to carry a tent on your Tacoma...
view full answer... - Crossbar Spacing For A Yakima LockNLoad Platform Rack On A 2018 Lexus GX 460The Yakima LockNLoad Platform Roof Tray # Y05044 (K) you're looking at requires that the spacing from the center of the front crossbar to the center of the rear crossbar needs to be 27" to 33" apart. The platform rack will most likely overlap with the sunroof.
view full answer... - Fitting Yakima LockNLoad Platform Roof Tray to Round CrossbarsThe Yakima LockNLoad can fit round crossbars but you will need to use the Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039. RoundBar SL Adapters won't allow you to mount the platform to the rack, as they are designed to mount crossbars to certain Yakima roof rack towers. The Crossbar Clamps # Y05039 will fit LockNLoad trays like the Yakima LockNLoad Platform Roof Trays, which come in different sizes such as the 55" Long x 49" Wide # Y05044 and 84" Long x 62" Wide # Y05049.
view full answer... - What Tie Downs Can I Use With The Yakima LockNLoad # Y05044The Ladder Pegs for Rhino-Rack Heavy-Duty Crossbars - 3" Tall # RSLP will not fit in the tracks of the Yakima LockNLoad Platform Roof Tray # Y05044, but I have something similar that you can use with the LockNLoad. The Ladder Pegs are made to fit in the rhino rack heavy duty crossbars # RB1375B-2. You can use the Yakima Eye Bolts # Y01162 with the lock in load on your 2019 Jeep Grand Cherokee.
view full answer... - Can Yakima DeepSpace 10 Rooftop Cargo Box Be Installed on Yakima LockNLoad Platform TrayThe Yakima DeepSpace 10 Rooftop Cargo Box # Y65RR can be mounted to the Yakima LockNLoad Platform Roof Tray, like part # Y05044, but you'll be using the clamps for the installation since the DeepSpace 10 currently (July 2023) doesn't have any T-Slot hardware. I confirmed with Yakima that this will work though so you'll be good to go with this combination!
view full answer... - Smallest Yakima Lock N Load Platform For 2018 Ford Expedition The smallest size Lock N Load Platform made is 55 inches long by 49 inches wide # Y05044. You can use the same adapters and towers for this to fit on your 2018 Ford Expedition. This is the closest size to your panel you have.
view full answer... - Will the Rhino-Rack Pioneer Platform # JB0892 Fit on My 2014 Jeep Grand Cherokee with Flush Rails?I have a solution for you. As far as mounting a Pioneer platform 72" x 56" and Backbone like the # JB0892 on your black and chrome raised rails of your 2014 Jeep Grand Cherokee, I confirmed with Rhino-Rack that they do not have an engineered fit of that size of platform for your roof. Also, we do not carry a Backbone that is guaranteed to fit your roof. Regrettably, your rails will not work with the RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCL6 either. With that being...
view full answer... - Can I Use The Yakima LockNLoad Platform Tray If My Facrory Crossbars Don't Adjust On My 2020 Rav4?The Yakima LockNLoad Platform Roof Tray # Y05044 is a pretty versatile tray as it gives you multiple points to mount it to the crossbars on your 2019 Toyota Rav4. All you need is two sets of the Crossbar Clamps # Y05039 and then once you put the tray on your roof rack, position it over your factory bars and use the clamps to secure it down! No need to have adjustable crossbars, the tray will have many different spots to connect the clamps! I've included a video of the LockNLoad so you...
view full answer... - Parts Needed to Install Yakima LockNLoad on 2018 Subaru Outback Limited for Rhino Rack BatwingThe easiest solution would be to order the part # Y05044-39 as this is a kit that includes both the # Y05044 and the # Y05039. The Rhino Rack Batwing part # RR33400 would easily fit to this as well since it can attach to the channels that are present on top of the LockNLoad.
view full answer... - Correct Yakima LockNLoad Platform Roof Tray For a 2016 Honda CR-V with Flush Side RailsIn order to use the Yakima LockNLoad Platform Roof Tray on a 2016 Honda CR-V with flush side rails you will need to use the following; part # Y05044, part # Y53TR, part # Y05042-2, and part # Y00245. This will be a direct mount option which mounts to factory fixed points . The tray also mounts directly to the mounting feet so there is no need for additional crossbars and adapters.
view full answer... - Parts Needed to Install Roof Rack on 1999 VW Euro VanI may have a solution for you, but I'm not showing any roof racks that are going to connect directly to any fixed mounting points or via rain gutters. You could go one of two directions with this that would allow you to mount a roof platform like the Yakima LockNLoad Platform Roof Tray # Y05044 on your 1999 VW Eurovan. You could use something like the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long - Black # 298-SX6000B, which are the easiest to install option since they...
view full answer... - Is There A Yakima LockNLoad Platform For My 2018 Subaru Forester XT?Looking at the available platform style racks for your Forester, we've found that the best fit for your 2018 Subaru Forester is going to be the 60 inch long by 49 inches wide Rhino-Rack Pioneer SX Platform Rack # JA9133. There is no Lock N Load # Y05044 that we have confirmed to fit on your Subaru. This is the same exact thing just a different brand. This rack comes with the SX feet that will connect to your factory raised rails. You do not have to buy the Timberline Lockable Brackets for...
view full answer... - Roof Platform Rack Options for a 2014 Jeep Grand CherokeeWe have a few different options for adding a platform rack to your 2014 Jeep Grand Cherokee and it all depends on how you'd like to install it. If you'd like to install the platform rack directly to the flush rails (you'll need to remove your OEM crossbars) then we have the following: Yakima LockNLoad - Parts # Y05044, # Y53TR, # Y05042-2, and # Y00244 Rhino-Rack Pioneer - # RR74AB If you'd like to install a platform rack to your OEM crossbar system then we have the following: Yakima...
view full answer... - Yakima LockNLoad that Fits 2023 Toyota RAV4Yakima actually has a LockNLoad that fits your 2023 Toyota RAV4 with the part numbers # Y05044, # Y33TR, # Y05042-2 but the Yakima platform can't fit the Backbone system.
view full answer... - Low Profile Cargo Tray for Roof of 2018 Ford Transit Connect Long Wheelbase with OEM CrossbarsFor your 2018 Ford Transit Long Wheelbase with the factory crossbars Yakima has the LockNLoad Platform Roof Tray part # Y05044 as a confirmed fit which I think you'd really like. It's lower profile, aluminum, easy to install, and also 55 inch long by 49 inch wide. I attached an install video link to this page for you to check out as well.
view full answer... - Parts Needed to Add Yakima LockNLoad Platform to 2020 Toyota HighlanderYes it is possible to add the Yakima LockNLoad Platform to your 2020 Toyota Highlander. You will need to start by adding a roof rack. Choose one of the following based on your roof style: Naked Roof - Yakima JetStream Crossbars # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06132 - BaseClip Fit Kit # Y06153 Flush Rails - Yakima JetStream Crossbars # Y00426 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 28 for Yakima SkyLine And Control Towers...
view full answer... - Will Small Thule Caproc k Platform Tray Fit 2024 Subaru Forester with Raised RailsAccording to my research you'll be able to install the Small version of the Thule Caprock on your 2024 Subaru Forester. The parts you'll need to accomplish this are the following: - Thule Caprock Platform Roof Tray 59" Long x 52-3/8" Wide # TH58YE - Evo Raised Rail Feet # TH710401 - Lock Core Kit # TH450400 (optional) Yakima lists their 55" Long x 49" Wide LockNLoad Platform Roof Tray # Y05044 fitting your vehicle with their specific leg kit and they have photo evidence of this platform...
view full answer... - Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot RailsFor your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
view full answer... - 2019 Lexus GX 460 Roof Rack Recommendation to Fit Flush Rail Roof StyleI'll be happy to help you find the best roof rack solution for the flush rails on your 2019 Lexus GX 460. For your application I highly recommend the Yakima JetStream roof rack system because it is a high quality system that is built to be versatile and has adjustments in the legs so you know you get the absolute best fit out of the crossbars: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 30 - # Y25ZR Lock Core Kit - # Y07204 (optional) If you let me know what...
view full answer...
- Replacement Yakima Towers Needed For Custom Install of Jetstream Cross Bars On A.R.E. TopperYou will need the SkyLine Towers for Yakima Crossbars, # Y53TR for a set of 4 or, # 8880614 for 1 each.
view full answer...
- Converting RetraxONE MX Tonneau Cover on a 2021 Ford F-150 5-1/2' Bed To Add Crossbars Above BedI have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails # RTT-82381 on the Cover # RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac # A54KG would be an option as this places the rails about half way up your window and attaches to the stake bed pockets. If you go the route of the T-Slots you will want the Yakima Crossbars # Y00427, Towers # Y53TR and 2 sets of the Landing Pads # Y00221. For your keys you...
view full answer... - 2019 Ram 1500 Fitment for Yakima HD Tracks and Tonneau CoverAs long as you can fit the 2" wide Yakima 60" HD Tracks # Y74MR so you have no less than 1/8" overhanging the outside of your truck bed side (see attached) you're good to go. This then allows you to use 2 sets of the Landing Pad 26 # Y75ZR and SkyLine Towers # Y53TR for a base system. The 66" Round Crossbars # Y00410 might work but I'm not sure if you'll have the clearance for that since I'm not sure where the Yakima tracks will sit. If they truly can sit in the middle of your rails...
view full answer...
- Parts Needed to Add Yakima Rack to Diamondback SE Tonneau Cover on Ford Super DutyWe can get your Ford Super Duty set up with a Yakima rack for your Diamondback SE tonneau cover. The Q Towers are no longer made and aren't compatible with Yakima's latest racks, so you'll need a new set of towers for the system. Here is exactly what you'll need: - Yakima 72" HD Tracks for Diamondback Truck Covers # Y92AR - Yakima HD Crossbars - 78" Long # Y01159 - SkyLine Towers # Y53TR - HD Bar SL Adapter # Y03541 - Landing Pad 26 for Yakima SkyLine Towers # Y75ZR You'll need a...
view full answer... - Roof Rack Replacement for OEM Crossbars to Carry Rooftop Tent on 2022 Subaru Outback WagonI'd be more than happy to help! To utilize a rooftop tent, like the Yakima SkyRise HD # Y07437, you'll actually need to remove your factory rack and replace it with an aftermarket kit. I really like the Yakima JetStream roof racks because they are not only great quality, but the legs have adjustments in them to ensure that you get the best fit possible. For this setup you'll need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 27 - # Y46VR Lock...
view full answer...
- Recommended Roof Rack for a 2023 Chevy Bolt EUV w/ Side Rails Yes, there is a way to mount a roof rack to the side rails of your 2023 Chevy Bolt EUV. You will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 item # Y00428 SkyLine Towers for Yakima Crossbars - Flush Rails, - Qty 4 item # Y53TR Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 These crossbars have a 165 lbs capacity. The skyline towers and landing pads will attach to your...
view full answer...
- Parts Needed to Install Crossbars on the Yakima 72" HD Tracks for Roof RacksTo install crossbars on the Yakima 72" HD Tracks for Roof Racks # Y84MR you need 2 of the Landing Pad 26 # Y75ZR, the SkyLine Towers # Y53TR, and then your choice of Yakima crossbars. I recommend using the JetStream crossbars like the 50" # Y00425 because they look great, they are durable, and they are made of aluminum so they will last a long time. I like this system because you can adjust the crossbars along the rails to accommodate different accessories you might need on your truck.
view full answer... - Is The Rhino-Rack Roof Rack For Yakima Tracks Compatible With Yakima HD Tracks Hi Ken, The slots are slightly different between the standard Yakima Tracks (42" # Y01126, 54" # Y01127, 60" # Y01135) and HD Tracks (54" # Y64MR, 60" # Y74MR, 72" # Y84MR) so the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT would not be compatible with the HD Tracks. If you haven't gotten the Tracks yet then you'll want to go with the standards options. If you already have Yakima HD tracks then you'll need the following components: Landing Pad 26 # Y75ZR (x2) SkyLine...
view full answer... - Roof Rack For 2016 Honda Pilot For Two Thule HullavatorsI am going to assume your 2016 Honda Pilot has flush side rails and that you can remove your factory roof rack, and if so there is a way to use a pair of the Thule Hullavator Pro # TH898, but the ShowDown is far too wide to put on next to the Hullavator. If you're okay using a pair of Hullavators, the roof rack you need for your '16 Pilot is the following, from Yakima: - Yakima JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 19 # Y00245 You can lock the roof rack...
view full answer... - Yakima HD Crossbar Rack For Retrax Pro XR Tonneau CoverYou'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
view full answer... - What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
view full answer... - 2022 Toyota Highlander Roof Rack Recommendation for Flush Rails on RoofThe roof rack that fits the flush rails on your 2022 Toyota Highlander is from Yakima and uses their Landing Pad 28: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 28 - # Y66VR Lock Core Kit - # Y07204 (optional) Attached is an installation video of this roof rack on a 2021 Highlander for you to check out. If you let me know what you plan on using the roof rack for I'd be more than happy to make some additional recommendations.
view full answer...
- Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
view full answer... - How to Attach a Yakima Roof Rack to a 2019 Lexus GX460 w/ Flush Side Rails Thanks for the picture! The Landing Pad 30 for Yakima SkyLine And Control Towers item # Y25ZR attach directly to the factory flush rails. You won't have to remove you rails. You will also need the following parts to finish out your roof rack: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SkyLine Towers for Yakima Crossbars - Flush Rails - Qty 4 item # Y53TR
view full answer...
- What Yakima Landing Pad Do I Need For My 2021 Subaru OutbackYour 2021 Subaru Outback Wagon needs Yakima Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4, part # Y46VR. This Landing Pad provides the mounting points for your Yakima Skyline or Control towers. If you are using the SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4,part # Y53TR, you need to make sure you are using the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part # Y03536....
view full answer... - What Roof Rack Fits My Flush Rails on My 2022 Chevy Bolt EUV?Thanks so much for the photos! I can see how you might be confused. I went ahead and confirmed with Yakima that these rails are considered flush rails with fixed mounting points on your 2022 Chevy Bolt EUV. For a great roof rack system for your setup, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR - Landing Pad 19 # Y00245 - Yakima Same-Key...
view full answer...
- 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush RailsI'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
view full answer... - Roof Rack for Installing Two Thule Hullavator Kayak Carriers on Roof of 2020 Toyota RAV4By '4 Hullavators', I'm assuming you're meaning two sets which would allow you to carry two kayaks. Installing 2 Hullavators for carrying two kayaks will be a tight squeeze on the roof of a RAV4. You'll also need to keep in mind that each set of Hullavators weighs about 40 lbs, and most roof rack setups have a capacity of 165 lbs. This leaves you 80-85 lbs of capacity for the 2 kayaks in order to not overload the roof rack. If the combined weight of your Kayaks is less than 85 lbs, you...
view full answer... - Height of Yakima & Thule Roof Racks on 2022 Jeep Grand Cherokee 4xeThe Thule roof rack for your 2022 Jeep Grand Cherokee 4xe will add about 4 inches and the Yakima roof rack will add about 4-1/2 inches of height to your vehicle. Here is what you need for either rack: Thule - Thule WingBar Evo Crossbars - Silver # TH711200 or Black # TH711220 - Evo Flush Rail Feet for Thule Crossbars # TH710601 - Fit Kit for Thule Evo Flush Roof Rack Feet # TH68FE - (Optional): Thule One-Key System Lock Cylinders # TH450400 Yakima - Yakima JetStream Crossbars - Silver...
view full answer... - How Can I Attach A Yakima LockNLoad Platform To My 2022 Subaru Outback Wagon W/ Factory Roof RackYou will be able to carry a LockNLoad Platform on your 2022 Subaru Outback Wagon, but it will not fit on your factory cross bars. In order to carry this platform, you will need the following: SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 27, part # Y46VR, Yakima LockNLoad Platform Rack for Crossbars, part # Y05044-39 LockNLoad SL Adapter, part # Y05042-2, and the Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This roof rack setup will allow you to...
view full answer... - What Roof Rack Can I Use with the Thule Hullavator on My 2022 Toyota Highlander with Flush Rails?I have a great solution for your flush rails on your 2022 Toyota Highlander to use the Hullavator # TH898. Yakima temporarily discontinued the Y00148 because they are updating the feet to fit a wider range of vehicles. Yakima has been changing a lot of fitments lately because of this factor. The landing pads # Y66VR are separate from the Y00148. However, with that being said, Yakima does have a roof rack system that fits your flush rails with a different model of feet. For that system,...
view full answer... - Roof Rack For 2022 Lexus GX 460 For Thule HullavatorSure thing, we can get your 2022 Lexus GX 460 set up with a roof rack for your Thule Hullavator # TH898, and what you'll need is a rack from Yakima. The correct parts for your Lexus are the following: - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 30 # Y25ZR I also recommend adding locks to protect your roof rack, keeping it secure on your Lexus. You can add those with the Yakima Same Key System (SKS) Lock...
view full answer... - What is Height of LockNLoad Platform Rack for LEER Camper Topper on a 2020 Nissan FrontierTo install the LockNLoad on your 2020 Nissan Frontier 5' Bed LEER camper topper you need the following parts: - 55" Long x 49" Wide Yakima LockNLoad Platform Roof Tray # Y05044 - TrackTowers # Y52AV - LockNLoad SL Adapter # Y05042-2 The TrackTowers sit about 2" tall and the LockNLoad is around 4" tall so you'll be adding about 6" to the height of your LEER topper which is pretty standard for a track mount platform. For something a little shorter you can use the Rhino-Rack Pioneer Platform...
view full answer... - Recommended Platform Rack for a 2021 Subaru Ascent I did a little digging around and it looks like the roof on your 2021 Suabru Ascent is around 63 inches, making the Yakima LockNLoad Platform Roof Tray # Y05045 with the TimberLine Towers for Yakima Crossbars # Y33TR, and the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 near perfect. This platform rack measures 60" long, 54" wide, and will be a perfect addition to your Subaru for all your camping and luggage needs. This rack also has top channels so you can...
view full answer... - Can You Use a Larger Yakima LockNLoad Platform Roof Tray on a 2023 Ford Expedition Than the 60"x54"You are correct that the 2023 Ford Expedition Platform Roof Rack by Yakima will fit the raised side rails on your Expedition. The 2023 Ford Expedition Platform Roof Rack by Yakima consist of: - Yakima LockNLoad Platform Roof Tray # Y05045 - TimberLine Towers for Yakima Crossbars # Y33TR - LockNLoad SL Adapter for Yakima # Y05042-2 I have an alternate option, but you would not be able to use the Yakima LockNLoad Platform Roof Tray # Y05048 (84" Long x 54" Wide) on your 2023 Ford Expedition....
view full answer... - Can Yakima LockNLoad Platform for 2011 Jeep Patriot Support Yakima SkyRise TentThe Yakima LockNLoad Platform Roof Tray part numbers # Y05045, # Y33TR, and # Y05042-2 that fits your 2011 Jeep Patriot can be used with roof top tents like the Yakima SkyRise Tent part # Y79XR that you mentioned without requiring any additional support.
view full answer... - How Can I Attach A Yakima LockNLoad Platform To My 2022 Subaru Outback Wagon W/ Factory Roof RackYou will be able to carry a LockNLoad Platform on your 2022 Subaru Outback Wagon, but it will not fit on your factory cross bars. In order to carry this platform, you will need the following: SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 27, part # Y46VR, Yakima LockNLoad Platform Rack for Crossbars, part # Y05044-39 LockNLoad SL Adapter, part # Y05042-2, and the Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This roof rack setup will allow you to...
view full answer... - What is the Recommended LockNLoack Platform for My 2022 Subaru Outback Wilderness?For your 2022 Subaru Outback Wilderness, Yakima recommends the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045. Since your vehicle has raised factory rails, you will need to purchase the TimberLine Towers # Y33TR along with the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 to attach directly to the rails.
view full answer... - Lowest Profile Roof Tray that Fits 2023 Subaru Ascent with Raised RailsYakima has a platform tray that fits the raised side rails of your 2023 Subaru Ascent with the Yakima LockNLoad # Y05045,# Y33TR, # Y05042-2 which will by far be your lowest profile option since a set of crossbars isn't required and it's a platform and not a basket so it is not very tall at all. The tray is 60" Long x 54" Wide.
view full answer... - Platform Tray that Fits Roof of 2018 Chevy TahoeFor your 2018 Chevy Tahoe we have the Yakima platform tray kit part # Y05045, # Y00148, # Y05042-2, and # Y00243 as a confirmed fit.
view full answer... - Will Rhino-Rack Pioneer Platform Rack Work On a 2020 Subaru OutbackI do have an option for you but the Rhino-Rack Pioneer Platform Rack cannot be used on a 2020 Subaru Outback per Rhino Rack. That said, we do have a very similar option for you in the Yakima LockNLoad Platform Rack part # Y05044-39. That said, this will need to be mounted using the below items as it won't fit the factory crossbars. The Rhino-Rack Pioneer and Yakima LockNLoad are both very similar. SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 27 for Yakima SkyLine And Control...
view full answer... - Can I Size Down From A LockNLoad Platform B To A LockNLoad Platform KYou should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part # Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems mounting the platform to your vehicle. Do keep in mind that you will need an adapter to mount this platform directly to your towers. The LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers - Qty 4, part # Y05042-2, will attach directly to your Yakima...
view full answer... - What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
view full answer... - Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof TentThe Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
view full answer... - Rhino-Rack Pioneer Platform Rack for 2019 Ford Expedition with Factory Rails and No CrossbarsI actually had the chance to work with a 2019 Ford Expedition. While in the shop, I tested the RhinoRack roof racks we had shown to be compatible with the factory installed rails and to my surprise, the SX Series Legs # RRSX100 were not a fit. When trying to install them, I could tell they were not tall enough to catch on the rather large and triangular shape of the Expedition rails. The only style of legs or towers that will work is the kind that wraps around the entire bar, like the...
view full answer...
- Recommended Platform Rack System without Crossbars for 2019 Toyota Highlander XLEFor a low profile platform style rack similar to a Rhino Rack Backbone System, the only available option is the Yakima Roof Rack and Platform System that uses parts # Y05045, # Y53TR, # Y05042-2, # Y00242. This kit combines the Yakima Lock N Load Platform # Y05045 and Yakima Skyline towers # Y53TR to give you the platform without a crossbar for the low profile setup you're looking for. The additional parts are for the footpack and adapters to allow you to mount the towers to your 2019...
view full answer... - Low Profile Roof Platform Recommendation for 2020 Toyota 4Runner with Factory Side RailsFor your 2020 Toyota 4Runner with the factory side rails, I recommend the Yakima LockNLoad Platform Roof Tray 60" Long x 54" Wide, part # Y05045. It's pretty low profile at only 4 inches tall, and it will not interfere with your sunroof, since it will sit right behind it. I've attached a couple of photos so you can see for yourself. To attach the platform, you'll need the LockNLoad SL Adapters # Y05042-2 (qty 4), and TimberLine Towers # Y33TR (qty 4). This will add approximately another...
view full answer...
- Is There a Platform Rack For a 2019 Ford Expedition That Mounts To Side RailsIf you want to use a platform rack and mount it directly to the side rails on a 2019 Ford Expedition (Includes Max) then I do have an option for this in the Yakima LockNLoad Platform Roof Tray Kit part # Y05045, part # Y05042-2, and part # Y33TR. The Yakima LockNLoad has integrated channels which allows you to use channel mounted accessories and it uses horizontal cross sections which allows you to use accessories that clamp on as well like a rooftop tent.
view full answer... - Platform Rack For 2018 Ford Expedition XLTWe have a platform rack for you but the Rhino Rack platform is not one that will work. I do have a Yakima platform # Y05045 that will work for your 2018 Ford Expedition. You just need this adapter # Y05042-2 and these towers # Y33TR. This will add about 4-3/4 inches from your roof to the top of the platform. It will add less height to your side rails so it is rather low profile. This rack is the same as the rhino rack but just Yakima. I've included a video for you to watch so be sure to...
view full answer... - Platform Rack Recommendation to Fit with Raised Rails on a 2021 Subaru AscentAs of right now I do not have any information as to if the Rhino Rack Platform will be compatible with your 2021 Subaru Ascent. If you want to get a platform on your 2021 Subaru Ascent, you can use the Yakima LockNLoad # Y05045 and use these adapters # Y05042-2 and these towers # Y33TR. The towers just wrap around your current side rails. This would only add about 4 inches to the top of your roof and it's your only roof tray option.
view full answer... - Can Yakima LockNLoad be Installed on 2021 Toyota 4Runner OEM Roof RackGreat question! The OEM roof rack on your 2021 Toyota 4Runner looks nice but it sits too low to your roof for the Yakima LockNLoad # Y05045-39 mounting hardware to fit. Instead of purchasing a roof rack AND the LockNLoad what I recommend doing is picking up the parts to mount the LockNLoad directly to the raised rails on your 4Runner: 60" Long x 54" Wide LockNLoad # Y05045 SL Adapter # Y05042-2 TimberLine Towers # Y33TR We don't have any brackets designed to fit with the ARB awnings...
view full answer... - Will the Rhino-Rack Pioneer Platform # JB0892 Fit on My 2014 Jeep Grand Cherokee with Flush Rails?I have a solution for you. As far as mounting a Pioneer platform 72" x 56" and Backbone like the # JB0892 on your black and chrome raised rails of your 2014 Jeep Grand Cherokee, I confirmed with Rhino-Rack that they do not have an engineered fit of that size of platform for your roof. Also, we do not carry a Backbone that is guaranteed to fit your roof. Regrettably, your rails will not work with the RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCL6 either. With that being...
view full answer... - Parts Needed to Install Yakima LockNLoad Platform B on 2013 Ford F-150 SuperCrewTo install the Yakima LockNLoad platform # Y05045 on the roof of a vehicle you'll need the SL adapters # Y05042-2, the towers # Y28TR, and the base clips part # Y06168 and you'd have everything needed to install on your 2013 Ford F-150.
view full answer... - Carrying A Yakima LockNLoad Platform On 2007 Chevy SuburbanThe Yakima LockNLoad Platform Roof Tray - Aluminum - 84" Long x 54" Wide, part # Y05048, needs a roof rack in order to attach to your 2007 Chevy Suburban. Your vehicle's roof either has raised rails or fixed points, so it has two separate roof rack fits. Each option has a maximum weight limit of 165lbs. Please keep this in mind because the weight of the rack and the accessories are part of the maximum weight limit and the LockNLoad Platform weighs 70lbs and the roof rack will weigh approximately...
view full answer... - Roof Platform Tray that Fits 2015 Chevy TahoeI have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.
view full answer... - 2018 Toyota 4Runner OEM Crossbars Fitment with Yakima LockNLoad Platform RackThe Yakima LockNLoad Platform Rack for Crossbars # Y05047-39 will fit your 2018 Toyota 4Runner, but you'll need to use aftermarket crossbars because the OEM crossbars sit too low to the roof and this mounting hardware won't fit. To install an aftermarket roof rack I recommend the Malone AirFlow2 # MPG216 because it is a cost-effective solution that will get the job done. If you'd like a solution that looks a little more custom fit the you can use the 60" Long x 54" Wide LockNLoad Platform...
view full answer... - Yakima Roof Rack Fitment on a 2013 Jeep Grand Cherokee OverlandI can help you find the right Yakima roof rack for your 2013 Jeep Grand Cherokee Overland. If your Overland has the E group package you will see a metal strip in the flush mounted rails, the Yakima kit you will need is the # Y00408 in combination with # Y53TR, # Y03536, and # Y00244. This kit will include the round crossbars, the RailGrab Towers, and the Raised Side Rail adapters. If your Overland doesn't have the E group it will have a black plastic rail and the Yakima kit you will need...
view full answer... - How Can I Use My Old Yakima Crossbars On My 2020 Jeep Grand CherokeeIf you want to use your old Yakima crossbars on your 2020 Jeep Grand Cherokee with flush rails, your options will depend on what crossbars you have and the raised rails on your vehicle. Your first option will work on Jeep Grand Cherokees with the E-Group Package. If you have the old Yakima round bars, they must be at least 50" in length. This rack will consist of the following items: Your Yakima round crossbars SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails,...
view full answer... - What Roof Rack and Cargo Box For My 2020 Jeep Grand Cherokee?For your 2020 Jeep Grand Cherokee with black/chrome flush factory rails, I recommend installing the reliable Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 # Y00428. In order to install these, you will also need Towers # Y53TR and Landing Pads # Y00244. The weight capacity is 165lbs, but you will want to verify that your vehicle roof can handle that much weight (owner's manual). As far as the cargo box, you will be able to accommodate the largest size we offer and still...
view full answer...
- Comparing Steel and Aluminium Crossbars for a 2020 Jeep Grand Cherokee with Flush TracksIn regards to choosing between steel and aluminium crossbars, I recommend aluminium because they will be lighter and offer better protection from the elements. The steel crossbars do have higher weight capacities but this would not be a factor as you will be limited by the mounting feet anyway. For a 2020 Jeep Grand Cherokee, the Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00244 is what I recommend for models with black and chrome tracks or matte black and...
view full answer... - Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group PackageTo determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
view full answer...
- Yakima Roof Rack for 2015 Jeep Grand Cherokee with Flush RailsSince your 2015 Jeep Grand Cherokee Overland has the chrome rails with the slots on its roof it means you have the E Group package. So yes, the Yakima Jetstream roof rack does fit your Jeep. The parts you need are: 50 inch JetStream Crossbars # Y00425 SkyLine Towers # Y53TR Landing Pad # Y00244 Check out the attached video.
view full answer... - How Does Yakima Roof Rack Install on 2018 Grand Cherokee Trailhawk with E-Group RailsWe installed the Yakima JetStream Roof Rack part numbers # Y00425, # Y53TR, and # Y00244 on a 2018 Jeep Grand Cherokee similar to your Trailhawk and we video recorded the process. If you fast-forward to the 3:09 mark of the video I attached you'll see how we intalled the kit and how it went. The forward and rearword most screws are to be used like you mentioned. Jeep may have a Mopar rack that installs differently on the rails, but the way Yakima recommends this rack install is the only...
view full answer... - Can 2 Yakima ShowDown Carriers be Used on a 2018 Jeep Grand CherokeeTo use the Yakima ShowDown # Y04081 you would need a roof rack where the crossbars extend past the legs at least 3-1/2". From what I can tell, the Mopar roof rack for your 2018 Jeep Grand Cherokee has crossbars that end where the legs fit. I do have a solution for you to carry your kayaks but when I reached out to my contact at Yakima she said you would need to at least use their 70" crossbar and that 2 of the ShowDown carriers will be at least 80" wide when placed side by side. Because...
view full answer...
- Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount RailsAssuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
view full answer...
- Yakima Jetstream Roof Rack that Fits 2015 Jeep Grand Cherokee OverlandSince your 2015 Jeep Grand Cherokee Overland has the chrome rails with the slots on its roof it means you have the E Group package. So the Yakima Jetstream roof rack does fit your Jeep. The parts you need are: 50 inch JetStream Crossbars # Y00425 SkyLine Towers # Y53TR Landing Pad # Y00244 I attached an install video for this rack on a similar 2018 Jeep Grand Cherokee. Then you could use a roof mounted bike rack like part # Y02114.
view full answer...
- Options For Putting A Yakima Lock N Load Platform On My 2021 Jeep Grand Cherokee TrailhawkThe lowest profile option for your 2021 Jeep Grand Cherokee Trailhawk would be to get the Landing Pad 18 # Y00244 for the Skyline Towers # Y53TR and use the SL adapters # Y05042 for this size Lock N Load Platform (55x49) # Y05044-39. This should get you about 5 inches of clearance from your panoramic roof to the bottom of the platform. This is what I recommend and will be great for hauling your lumber and gear. Just make sure you do not exceed your jeep's roof weight capacity. If for some...
view full answer...
- Recommended Roof Rack and Rooftop Cargo Carrier For 2021 Jeep Grand CherokeeAs long as the Aluminum rails on your 2021 Jeep Grand Cherokee are the Chrome/Black rails then the Yakima Roof Rack System you were looking at that uses 50" Yakima JetStream Crossbars in Black # Y00425, SkyLine Towers for Yakima Crossbars # Y53TR, and Landing Pad 18 # Y00244 would be the correct option for you. Adding the Yakima Same Key System (SKS) Lock Cores (QTY 4) # Y07204 will secure the roof rack to your Jeep to deter theft. The JetStream are have a very aerodynamic design and...
view full answer... - Yakima Roof Rack Recommendation for 2017 Jeep Grand Cherokee With Group E RailsThank you for the pictures of the rails of your 2017 Jeep Grand Cherokee. What you have is the Group E rails so the Yakima Aero bar roof rack you would need is the # Y00425, # Y53TR, and # Y00244.
view full answer... - Will the Rhino-Rack Pioneer Platform # JB0892 Fit on My 2014 Jeep Grand Cherokee with Flush Rails?I have a solution for you. As far as mounting a Pioneer platform 72" x 56" and Backbone like the # JB0892 on your black and chrome raised rails of your 2014 Jeep Grand Cherokee, I confirmed with Rhino-Rack that they do not have an engineered fit of that size of platform for your roof. Also, we do not carry a Backbone that is guaranteed to fit your roof. Regrettably, your rails will not work with the RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCL6 either. With that being...
view full answer... - How To Carry a Kayak On a 2016 Jeep Grand Cherokee Using Channel Inside Yakima Jetstream CrossbarThe Yakima Jetsream Crossbar System is an excellent option for a 2016 Jeep Grand Cherokee. If you have black and chrome side rails then you'll need part # Y00425, part # Y53TR, and part # Y00244. If you have all black side rails or a bare roof then you'll need part # Y00426, part # Y28TR, and part # Y06121. In regards to kayak carriers, most do indeed use wrap-around mounts which wrap around the crossbars but there are some that mount inside the tracks. The Rhino-Rack Nautic 581 Rear Loading...
view full answer... - Yakima SkyLine Roof Rack for a 2014 Jeep Grand Cherokee with Flush Side RailsThe Yakima SkyLine roof rack towers, # Y53TR, do indeed fit your 2014 Jeep Grand Cherokee with the factory flush side rails with fixed mounting points. For installation you will also need Landing Pad 18, # Y00244. There are 3 bar styles you can use with this roof rack. The SkyLine feet come with components to attach the Corebars # Y00422 or the Jetstream bars # Y00426. You can also use round bars # Y00409 but will need adapter # Y03536, sold separately.
view full answer... - What is the Largest Cargo Box I Can Mount on My 2018 Jeep Grand Cherokee?The largest Thule cargo box that will fit your 2018 Jeep Grand Cherokee is the Thule Motion XT Rooftop Cargo Box - 22 cu ft - Titan Glossy # TH629907. If you want a Thule roof rack that is compatible with your 2018 Jeep Grand Cherokee that will be compatible with the Thule Motion XT, I recommend the following system: - Thule WingBar Evo Crossbars - Aluminum - Silver - 53" Long - Qty 2 # TH711400 - Rapid Podium Feet for Thule Crossbars - Fixed Point - Qty 4 # TH460R - Fit Kit for Thule...
view full answer... - Canoe Carrier Recommendation for a 2017 Jeep Grand CherokeeThanks for your kind words! For a great carrier for a 16' canoe on your 2017 Jeep Grand Cherokee Trailhawk, I recommend using the Yakima KeelOver Canoe Carrier # Y04069. The KeelOver comes with a simple, tool free installation onto your crossbars and already includes all the straps you need to secure your canoe. For your canoe length, you will be able to adjust your crossbars to the required spread of 30" apart. As far as crossbar compatibility, the KeelOver clamps around crossbars that...
view full answer... - Thule Roof Rack Recommendation for a 2012 Grand Cherokee Overland with Flush RailsI spoke to Thule about this issue and they said that they used to use the THKIT4019 to fit the Laredo Group E roof racks on the 2012 Jeep Grand Cherokee, but moving forward they are now using a different style clip system and that is why the THKIT4019 is no longer available. For your vehicle you would want the following parts to put an Thule Aeroblade roof rack like the one you referenced on your vehicle. Thule Aeroblade Load Bars # TH711520 Thule Rapid Traverse Foot Pack # TH480R Thule...
view full answer... - Roof Rack Recommendation for Attaching to Flush Rails of 2018 Jeep Grand CherokeeThe Rhino-Rack roof rack # RRRVP27 you mentioned is a fit for your Jeep as long as your flush rails have a chrome center section. These crossbars will give you a factory look and a quality rack that includes the locks to secure your investment. If you wanted a longer crossbar we have the Yakima roof rack part numbers # Y00425, # Y53TR, and # Y00244 which will give you a 50 inch long crossbar roof rack. I attached a picture and install video for this rack on a similar 2018 Grand Cherokee...
view full answer...
- Crossbar Recommendation for Yakima JayLow Kayak Carrier and 2015 Jeep Grand CherokeeThe best roof rack we carry for using long crossbars is the Yakima RoundBar system. Since the bars slide through the mounting points on the feet you can essentially use whatever length of bar you'd like. I do caution you to not get bars that extend out further than the side view mirrors though. The Yakima system that fits your 2015 Jeep Grand Cherokee with the black and chrome roof rails is the SkyLine system. You need the SkyLine towers # Y53TR, RoundBar adapter # Y03536, and Landing...
view full answer... - Roof Platform Rack Options for a 2014 Jeep Grand CherokeeWe have a few different options for adding a platform rack to your 2014 Jeep Grand Cherokee and it all depends on how you'd like to install it. If you'd like to install the platform rack directly to the flush rails (you'll need to remove your OEM crossbars) then we have the following: Yakima LockNLoad - Parts # Y05044, # Y53TR, # Y05042-2, and # Y00244 Rhino-Rack Pioneer - # RR74AB If you'd like to install a platform rack to your OEM crossbar system then we have the following: Yakima...
view full answer... - Best Yakima Roof Rack for 2019 Jeep Grand Cherokee with Group E PackageYou are correct that the rails on your 2019 Jeep Grand Cherokee are the Group E package, which are black and chrome, and there is a great option from Yakima. The best roof rack for your '19 Grand Cherokee with the Group E package from Yakima will utilize the JetStream crossbars which will give your car a roof rack that is highly effective and quiet with a distinguished look. You can check out how this rack looks on a Grand Cherokee in the accompanying photo. This roof rack is made up...
view full answer...
- Roof Rack Needed for 2021 Jeep Grand Cherokee Limited For Thule HullavatorFor your 2021 Jeep Grand Cherokee that has the flush roof rails that have the chrome center section for a roof rack the Yakima 55 inch HD bar setup part # Y01156, # Y53TR, # Y03541, and # Y00244 would be a really great option with plenty of capacity and bar space for roof top cargo. Now you'd only be able to fit two of the Hullavators part # TH898 based on how much space they take up and how they fold down etc. This rack can easily detach for the Yakima bars as it would fit into the top...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.