Can Yakima DeepSpace 10 Rooftop Cargo Box Be Installed on Yakima LockNLoad Platform Tray

Question

Question:

Can this box be mounted on the yakima lock n load rack using the existing t slots?

asked by: Larry W

0

Expert Reply:

The Yakima DeepSpace 10 Rooftop Cargo Box # Y65RR can be mounted to the Yakima LockNLoad Platform Roof Tray, like part # Y05044, but you'll be using the clamps for the installation since the DeepSpace 10 currently (July 2023) doesn't have any T-Slot hardware.

I confirmed with Yakima that this will work though so you'll be good to go with this combination!

expert reply by: Jon G

0

Answer 1

You should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part #Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not…

view full answer...

Answer 2

The center-to-center measurement for the T-Slots on the Yakima LockNLoad Platform Rack #Y05044-39 is 5" (see attached). Attached is a review video for you to check out!

view full answer...

Answer 3

I had the Yakima SkinnyWarrior Roof Rack Cargo Basket - Steel - 58" Long x 23" Wide #Y07014 pulled and personally measured the distance between the rungs and found that each one is spaced 3-1/8" apart. The brackets for this…

view full answer...

Answer 4

The inside width of the Yakima SkinnyWarrior Roof Rack Cargo Basket part #Y07014 is 21". Therefore, it could be used to secure the boogie boards.

view full answer...

Answer 5

I checked with Yakima and the slats of the Yakima LockNLoad Platform Rack #Y05044-39 are 180 mm apart on center. 180 mm is right at 7 inches.

view full answer...

Answer 6

For your 2018 Ford Transit Long Wheelbase with the factory crossbars Yakima has the LockNLoad Platform Roof Tray part #Y05044 as a confirmed fit which I think you'd really like. It's lower profile, aluminum, easy to install, and also 55 inch…

view full answer...

Answer 7

The Yakima LockNLoad Platform Racks like part #Y05044-39 won't work with roof boxes so if you have a 2019 Toyota Land Cruiser the Rhino-Rack Pioneer SX Platform Rack part #JA9134 would be a better option. Furthermore, the LockNLoad requires…

view full answer...

Answer 8

Unfortunately no, the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers #Y05042 will not work with the Yakima Baseline towers. To get a Yakima LockNLoad platform on your Baseline Towers for your 2016 Chevrolet Silverado you would need to…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Can Yakima DeepSpace 10 Rooftop Cargo Box Be Installed on Yakima LockNLoad Platform Tray

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching