Yakima Roof Rack Fitment on a 2013 Jeep Grand Cherokee Overland

Question

Question:

Cant seem to locate what tower to purchase to adapt Yakima rack

asked by: Terrie S

0

Expert Reply:

I can help you find the right Yakima roof rack for your 2013 Jeep Grand Cherokee Overland.

If your Overland has the E group package you will see a metal strip in the flush mounted rails, the Yakima kit you will need is the # Y00408 in combination with # Y53TR, # Y03536, and # Y00244. This kit will include the round crossbars, the RailGrab Towers, and the Raised Side Rail adapters.

If your Overland doesn't have the E group it will have a black plastic rail and the Yakima kit you will need is the crossbars # Y00409, the BaseLine Towers # Y28TR, adapters # Y03536, and the fit clips # Y06121.

expert reply by: Jackie C

0

Answer 1

There is not a general restriction from Thule that says two Hullavator Kayak Carriers #TH898 can't be used on a Thule roof rack. As long as the crossbars on your Ford Escape have the required length for two sets and a sufficient weight capacity…

view full answer...

Answer 2

I believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover #Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This…

view full answer...

Answer 3

Since the Yakima Showdown part #Y04081 hangs over the crossbars quite a bit when installed and they are 42 inches long the best bar length for two of them would be 60 inch like you mentioned. So for that you'd want the #Y00426 if you had the…

view full answer...

Answer 4

A great option for your 2020 Jeep Grand Cherokee is the Thule Wingbar Evo Roof Rack System which uses Thule Wingbar Evo 53" Crossbars #TH711420, Feet #TH49SC, and Thule Fit Kit #TH53ZE. This roof rack system will work with you Inno Cargo Carrier…

view full answer...

Answer 5

The Yakima ShowDown Kayak or SUP Carrier and Lift Assist part #Y04081 requires about 42" of crossbar space. Therefore, you'd wouldn't be able to realistically fit two side by side. I'd suggest using the etrailer J-Style Kayak Carrier…

view full answer...

Answer 6

For your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket #Y07080-82. This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars #Y01156, measures 74" long x 48"…

view full answer...

Answer 7

We have exactly what you are looking for. The Yakima A Anchor plates #Y8810074 you purchased are designed to work with the Yakima Landing Pad 1 #Y00221 which is not what is in the picture of the landing pads you purchased so you will need to purchase…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

There are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following: -SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 #Y64AR -RoundBar SL Adapter for Yakima BaseLine,…

view full answer...

Yakima Roof Rack Fitment on a 2013 Jeep Grand Cherokee Overland

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching