Recommended 2-Step Upgrade for 2018 Lance 1475s Trailer
Question:
Hello I have a 2018 Lance 1475s s=slide with a Flexco Single Step. We want to replace this with a double step if possible. Aluminum if possible but black is ok as well. 1. The mounting bolts are 4 inches apart. 2. The step itself is 24inch wide We want to find a double step to fit in the original mounting bracket with the the mounting bolts that are 4 inches. This camper sits low. Can you make some suggestions? I am attaching photos for your review. Thank you
asked by: Richard M
Helpful Expert Reply:
The only possible double step upgrade option we have for a 2018 Lance 1475s is the Flexco Manual Pull-Out Steps for RVs part # SMFP-2100. It looks like the only dimensions that won't match up is the mounting flange bolt spacing which is larger on this double so you will need to drill a few holes is all.
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 3" to 9" to account for the drop from the bottom steps to the ground. This measurement will also tell you how many steps you need. The above step measures 13" from the top of the flange to the bottom of the last step.
Product Page this Question was Asked From
Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 24" Wide - 300 lbs
- RV and Camper Steps
- Towable Camper
- Pull-Out Step
- 24 Inch Wide Step
- 27-5/8 Inch Wide
- 2 Steps
- 8 Inch Drop/Rise
- No Ground Contact
- Steel
- Stromberg Carlson
more information >
Continue Researching
- Shop: Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs
- Q&A: Measurements of Flexco Manual Steps for RVs Double 7-7/8" Drop/Rise 24" Wide 350 lbs SMFP-2100
- Search Results: smfp~2120
- Search Results: smfp~1120
- Shop: Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 20" Wide - 300 lbs
- Q&A: Will Pull Out Steps fit 2011 Palomino Puma 27KFQ
- Q&A: Bolt Hole Measurements on Flexco Pull
- Shop: Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 24" Wide - 300 lbs
- Video: Reese Weight Distribution Shank Installation - 2013 Ram 1500
- Video: Reese Weight Distribution Shank Review
- Shop: Reese Pro Round Bar Weight Distribution w Sway Control - Round Bar - 11,500 lbs GTW, 1,150 lbs TW
- Shop: Reese Weight Distribution Shank for 2" Hitches - 9 Hole Adjustment - 1,200 lb TW
- Shop: Trailer Hitch
- Q&A: Distance Between Mounting Holes on Side of Flexco Manual Pull-Out Steps for RVs
- Q&A: Mounting Hole Spacing on the Flexco Manual Pull-out Steps for RVs
- Shop: Flexco Manual Pull-Out Step for RVs - Single - 7" Drop/Rise - 24" Wide - 300 lbs
- Q&A: Replacement Manual Step for a 2018 Lance 1475
- Shop: Trailer Valet 5X Swivel Jack and Trailer Mover - Topwind - 15" Lift - 5,000 lbs
- Q&A: Will The Lippert Manual Pull-Out Step For RVs Fit My Enclosed Trailer With A Side Door
- Search Results: 2" hitch with sway bar
- Video: Lippert Components RV and Camper Steps - Motorhome - LC432682 Review
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Video: Curt Weight Distribution - Sway Control Only - 17200 Review
- Search Results: smfp~1100
- Search Results: rv step
- Search Results: smfp~2100
- Search Results: lc432682
- Video: Review of Lippert Outriggers For Manual RV Steps - LC301704
- Video: Review of Stromberg Carlson RV and Camper Steps - Single Manual Step - SMFP-1100