Lippert Hydraulic Interior Switch - White

Video Transcript for Review of Lippert RV Exterior Parts - Hydraulic Interior Switch - LC120639

Ellen: Hey everybody. I'm Ellen here at etrailer.com, and we're taking a quick look at the Lippert Hydraulic Interior Switch for your slide-outs. Now this is going to be a piece that you can use for an add-in slide out, or maybe you just need to replace that switch that's gone bad in your RV, whatever the case might be, this is going to work for you. So let's take a closer look, make sure it's the right fit.As far as how it works. It's just going to be a rocker switch that's going to allow you to run that slide-out in or out. As soon as you let go of the switch, it comes back to neutral or stops the motion.

So we'll have our connections back here. Just have to attach the wiring to get this little switch in place. You just have to kind of push it into the plate.So there is a little bit of assembly, but it's pretty easy to just pop that switch into the plate and you're good to go. It does not come with any mounting hardware. You'll need two screws.

So you will have to pick up those on your own. This is for use on your LCI in-wall slide-outs, and it is made in the U.S.A. And that's pretty much all there is to it, as far as that goes.I'll give you a couple of measurements here just for reference. So the plate is about 3" wide by 4 3/4. The distance between the mounting holes center-to-center is about 3 1/4 roughly, and that's pretty much it.

Now, if you need any other accessories or parts for your LCI slide-outs, we do have a lot of parts here at etrailer.com and all kinds of accessories and goodies for your RV's in general. So be sure to check them out right here at etrailer.com, and thanks for watching..