Single Slide-Out Momentary Switch - On/Off/On - 4-Pin - White

Video Transcript for Review of JR Products Wiring - Slide Out Switch - 37212385

Jeff: Hello everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this Single Slide-Out Momentary Switch, the four pin connection in the white color. Now, this slide-out switch where we'll replace a worn or damaged switch on your RV slide-out room. The connection is a four pin, 12 volt, 40 amp continuous connection. The switch itself, when you push it, is momentary on, when you let it go in the middle it's off, and then push it the other way it's momentary on also.

So, momentary on, off, momentary on. It is a white color. It is made in the USA.Last thing I want to do is just give you some dimensions on this. The overall dimension, so the width of the switch, including the plate is going to be right at 1 1/8 inches wide. Overall height of it will be right at 1 3/4 inches tall.

This does fit into a cut-out. Basically, what you would do is if you notice on both ends, you just push in on those clips, push it into the cut-out, and let them go, and it'll pop back, and hold it, and lock it into place. The cut-out dimension width-wise is going to be right at 1 inch, and height-wise it's going to be right about 1 5/8 inches tall.Again, just to show you momentary on, as it go right in the middle it's off, and then momentary on again. But that should do it for the review on the Single Slide-Out Momentary Switch, four pin connection in the white color.