Single Momentary Reversing Switch - On/Off/On - Water Resistant - DPDT - Black

Video Transcript for Review of JR Products Switch - 37213865

Michael: Hi there, I'm Michael with etrailer.com. Today we're going to take a quick look at the single momentary reversing switch. This switch is capable of handling two loads. It's going to allow you to press on either side of the rocker switch, and it will immediately return back to the off position, as you can see. So if we want the power to continue to flow through, we're going to have to hold down, and that's going to allow it to make sure that no power is flowing through when we don't want it to. So pretty simple design, but going to be effective for you.It is going to be water resistant, and as far as our power draw ratings go, it is capable of 20 amps at 120 volts alternating current, 10 amps at 250 volts of alternating current, 12 amps at 125 volts of three quarter horsepower, 10 amps at 277 volts alternating current and three quarter horsepower, and 30 amps at 12 volts DC power.

This is manufactured to meet all of the standards that you see on the screen there. So it is UL, CSA, ROHS, and IP66 approved, so you can trust it is going to be safe. Obviously when you're dealing with electricity, you want to make sure that you're getting quality components, and this is going to be a quality component for you.As far as our dimensions go, it is right about one inch in total width with our mounting plate there. The switch itself is just shy of three quarters of an inch in width. Switch is right about one and one eighth in total height there, and then with our whole plate we're looking at just over a one and three quarters of an inch.

Now to get this mounted, you are going to need a cutout that is going to be right about one and a half inches by slightly over three quarters of an inch, so keep that in mind, make sure that that's going to work for you.Obviously this is a black color, so should blend in well with most of your applications with that black feature to it. It is made here in the USA, so you can trust it's made to the high quality standards that we've come to know and trust for products made here in the US. Really that's all there is to our rocking switch, so if you're in the market for a switch that allows you to handle two loads like that, I think this is going to be a great option for you. So that's going to complete our look for today. Again, I'm Michael with etrailer.com, thanks for watching..