Compact, single bowl RV kitchen sink is perfect for smaller kitchens. The sink simply drops into your existing hole, which makes it easy to install and clean. ABS plastic construction is lighter and more eco-friendly than fiberglass.
Features:
Specs:
This sink has a top-mounted, drop-in design. Drop-in (or self-rimming) sinks are generally quicker and easier to install than undermount sinks, and they can be installed into any countertop material. They also have a lip on the perimeter, so that once the sink is installed, the weight of the sink and its contents are transferred over to the surrounding countertop. This better supports and secures the sink, whereas undermount sinks might fall if not installed properly. In addition, because all parts of drop-in sinks are visible, they are incredibly easy to clean.
If you're replacing your sink, you'll simply use the existing cut-out hole in your countertop. If you're upgrading your indoor or outdoor sink setup, you may need to enlarge the hole. It should be 1/2" to 5/8" smaller than the overall length and width of the sink. Either way, once you have a proper size hole, you can just drop the sink in and secure it to the counter using the included brackets and pre-installed mounting studs. Mounting hardware is not included. Once the sink has been installed, you can use the holes at the top of the sink for faucet with a 2-hole setup, and it is compatible with any standard 2" garbage disposal and drain basket.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Better Bath RV Kitchen Sink. This is a single bowl square sink that will replace or upgrade the sink in your RV, camper, or boat kitchen. This does have a nice compact size, so it is gonna be perfect for your smaller kitchens. It can also serve as an upgrade for an outdoor sink. As you can see, it is gonna be compatible with your 2-hole faucet setup.
Our overall dimensions, we're looking at right about 14 11/16 of an inch long by 14 11/16 of an inch wide, so it is gonna be nice and square for you, and then our depth, it's gonna be about 5 1/4 of an inch. Our bowl interior, we're looking at approximately 11 1/2 inches by, call it 9 5/8 of an inch, and our internal depth is about five inches deep. Our faucet holes here at the top are 1 1/2 inch diameter, they are spaced, center to center, four inches apart. Our drain hole in the bottom is a two inch diameter. This is a durable, scratch resistant ABS thermoplastic polymer construction, so it is gonna be very lightweight and durable.
It's got a parchment finish to it, so it's not quite white, you can see the difference between my white tabletop here and this parchment finish, so it's a little more yellow, so make sure that that's gonna work with your interior colors. But being an ABS thermoplastic polymer construction, it is going to be lighter and more environmentally friendly than your fiberglass options. It is gonna be very durable, you're not gonna have to worry about scratching it anymore than you would with most products. This does have a drop-in mount design, so it is gonna be easier to get installed and to clean than your undermount sinks, so it is just gonna sit on top of your hole, so it'll just drop in, sit on top of the sink there, so it's going to be supporting its own weight instead of having to worry about your brackets and whatnot holding it up underneath your sink, and so, then you can just wipe around the edges, that sort of thing, so very easy to clean. Very easy to get installed, they do include the brackets and pre-installed mounting studs here, so you'll just drop it in to your existing hole, you got your brackets and wing nuts to tighten it down.
They do not include any additional mounting hardware, so what you see here is what you're gonna get. This is made here in the USA, so you can trust it is made to the high quality standards we've come to know and trust for products made here in the US. It is IAPMO certified, CSA compliant, and ASME certified as well, so you can trust it is gonna meet those high quality standards, will do a great job for you. So if you are wanting to replace or upgrade the sink in your RV, camper, or boat kitchen or outdoor sink, this is gonna be a great option for you. That completes our look for today.
Again, I'm Michael with etrailer.com, thanks for watching..
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
Compact, single bowl RV kitchen sink is perfect for smaller kitchens. The sink simply drops into your existing hole, which makes it easy to install and clean. ABS plastic construction is lighter and more eco-friendly than fiberglass.
Do you have a question about this RV Sink?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.