225-Watt inverter lets you use appliances and devices wherever the road takes you. Modifed sine wave technology is perfect for appliances with resistive loads. Changes your RV battery's DC output into AC power. Connects to 12V DC outlet.
Features:
Specs:
This 12V inverter changes DC output from your RV batteries into AC power so you can plug in tools and appliances. Using modified sine wave technology, it creates a stepped waveform that simulates AC power. This is perfect for resistive loads like electric heaters and toasters. Plus, the inverter can generate 450 starting watts and 225 running watts which is a great fit for smaller appliances.
The inverter includes 2 standard North American outlets for AC loads, positive and negative DC input terminals with battery clamps that connect to your batteries, 12V DC adapter, USB port for charging small electronic devices, and a port for a fixed-mount remote (sold separately).
The system includes a number of safety features. It offers protection from over/under voltage and overloading. The inverter also uses a heat sink process to protect from extreme temperatures, and an internal cooling fan removes excess heat from the unit.
The inverter mounts inside your RV in a dry location with ventilation. It should be installed in close proximity to the battery bank, but not in the same compartment. The DC terminals use battery clamps that connect to your batteries or you can use the 12V DC adapter.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're going to take a look at the Go Power! 12 Volt 225 Watt Heavy Duty Modified Sine Wave Inverter. Now, this inverter will convert DC battery power to AC household power wherever you go. It uses heavy duty modified sine wave inverter to offer the AC power. It's perfect for smaller loads, like portable electronics. It'll run any device in the wattage range without interference.It's all in a nice heavy duty steel case, has the two dual-standard outlets here, one USB port right up at the top. Does give you full overload protection.
It is compatible with 12 volt systems. The continuous output power is 225 watts, peak surge power is 450 watts. AC output voltage is 100 volts to 120 volts and the input voltage range is 10 and a half volts to 16 volts DC. The AC output wave form is a modified sine wave.Maximum efficiency is 80%, and the battery drain with no AC load is less than or equal to 0.7 amps. This includes everything here on the table.
It includes the inverter itself, the 12 volt DC plug-in cables, the DC inverter cables and a nice user's manual that will describe how to hook everything up and how to use it. The weight on this is about one pound.Last thing I want to do is give you some dimensions on it. The length, which will include the mounting bracket, so edge to edge, will be right at five and a quarter inches long. The width on it, it's going to be right at three and 13/16th of an inch wide. The depth of it is going to be right at two and 1/16th inches deep.
That should do it for the review on the Go Power! 12 Volt 225 Watt Heavy Duty Modified Sine Wave Inverter.
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
225-Watt inverter lets you use appliances and devices wherever the road takes you. Modifed sine wave technology is perfect for appliances with resistive loads. Changes your RV battery's DC output into AC power. Connects to 12V DC outlet.
Do you have a question about this RV Inverter?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.