Summer Starts Here - Save up to 70%
JR Products gas shock replaces 1 worn or damaged shock on your RV entry door or storage doors. Durable black-nitride finished gas shock measures 7.91" compressed, 12" extended, and has 40 lbs of force.
Features:
Specs:
When replacing gas shock on your vehicle or RV, you will want to make sure you are buying a replacement with the exact same extended length, compressed length, and pounds of force. This information is usually printed on the shock. Lengths are measured from the center of the ball joint used for mounting. If you are planning on installing gas shocks on something for the first time, identifying the shock you need requires fairly complex initial calculations, so be sure to do your research to avoid purchasing a shock that will not fit your application.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the JR Products 12 inch long gas shock. Now this gas shock is designed to replace a worn or damaged shock on your RV entry door or storage doors. The extended length on this, which is measured from the center of this ball socket to the center of this ball socket, it's going to be right at 12 inches. The compressed length would be if we completely compress this, then it would measure 7.91 inches. Output force on the shock is 40 pounds. And the connection type on this is a retaining clip on a 10 millimeter ball socket.I'm going to zoom in just to show you the detail of that, and basically if you'll notice, here's your ball socket that'll go onto a 10 millimeter ball and to install it on the top you can see this retaining clip, if you just slide a flat tip screwdriver up under that retaining clip, pry it up to release it, that'll release the pressure on that socket and then you're able to push this onto your 10 millimeter ball.
Once it's on there, just push that clip back down and it'll secure the shock in place. So very simple installation. Now the finish on this is a nice black nitride finish.But that should do it for the review on the JR Products 12 inch long gas shock..
Average Customer Rating: 4.7 out of 5 stars (313 Customer Reviews)
JR Products gas shock replaces 1 worn or damaged shock on your RV entry door or storage doors. Durable black-nitride finished gas shock measures 7.91" compressed, 12" extended, and has 40 lbs of force.These work great for toolbox lid
We use these on our tool boxes and they work great.
Good product, used it online riding lawn tractor as a mower deck assist. Good value and fast shipping.
Great company!
Works perfectly
Excellent product, perfect fit.
The selection process was easy to follow. I needed gas struts with a greater lift capacity for our under bed storage due to the addition of a memory foam mattress. I was able to select a strut pair with the proper length and extension from the website. The struts were received quickly and were exactly what I needed. The bed now raises gently and remains elevated.
When my package arrived it was beat up and one of the clips on the end of the shock was missing,not what I would give a good report !!
Item was exactly as advertised, easy installation, fits perfectly on our RV door. Our previous gas shock was worn out & would not hold the door open. This product is sturdy & stable. It fixed the issue.
This strut did not fit precisely due to the thickness of the end connectors. They are thicker than the original strut and since the strut has to fit between the bottom of the door and the threshold in the closed position it would not allow the door to close. I found that by exchanging the end connectors with the original strut I was able to install the strut and close the door. The only problem with this solution is that the new strut with the old connectors is slightly longer than the old strut/connector assembly and now allows the door to open slightly farther than before. Our awning arm just barely clears the door when opening and closing so will have to be very careful from now on when extending and retracting the awning. Our motorhome is a Sunseeker 3010ds model in case this is helpful to others ordering this product.
Product is installed but instructions were a bit vague and difficult to implement(related to the removal of previous gas shock bar).
Exactly what I needed for my Kwik Kamp motorcycle trailer! It's nice to share information in our group when we find parts to use for our discontinued campers.
Thanks, now my tool box won't cut my arm off.
product works well, shipping took a little longer than I expected
Very fast delivery! I've ordered from e-trailer several times and service has always been great!
Price is right and product fit and functioned well for my application on a Leer truck topper rear glass door
Works great haven't had any problems with it, would buy again if I ever needed it
This fit my 05 Bigfoot 9.6 camper door with about 3/8 compression left. This is the shock you want. It has a slow open feature and does not slam the door open possibly risking tearing the mounts off. So no worries about people who just open the door and head out. We used to have to coax the door open. Not you can let go of it. Love this shock!!
Exactly what I needed delivered in a timely manner
The Stabilus shock holding the 22" door of our bumper pull trailer open was weak. Mild wind would push it shut. This shock fit right onto the existing ball joints. A small blade screwdriver pried the "c" clip back, allowing me to slip the socket over the ball, and the clip snapped into place. Maybe 30 seconds and the shock was installed.
The biggest challenge was determining what force I needed in the replacement. The existing shock had the model information scraped away where it rubbed on the door threshold. No where could I find on the etrailer site what force a small door shock should be. I ended up chatting with an RV service tech I know, who looked it up in his parts catalog. Turns out 10 lb force is standard except for large RV doors. I would suggest etrailer.com add this information on their online catalog. Maybe it's there and I couldn’t' find it? "Gas shock force needed for RV doors."
Product was damaged and not received, but etrailer stepped up and sent another gas prop. More companies should have these work ethic’s. Good job
fit and worked great
This item was not an exact fit but it was very close and it worked. My thanks to Josh for his help and time he spent with me to figure it out. The difficulty was there was no part number or part to use or measure. Josh was working in the blind and lucky for me it worked.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.