Stylish, sleek dinette tabletop has cherry wood-grain finish that matches the decor in your RV or camper. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack. Leg kit sold separately.
Features:
Specs:
Need to directly replace the scratched-up etrailer dinette tabletop in your RV? Or perhaps you just want to upgrade to a stronger, more durable tabletop surface? This wood-grain laminate dinette tabletop provides you and your family with a level, sturdy surface in your RV or camper to enjoy meals, play board games, or work on your laptop. The tabletop's high-density EPS foam core is strong enough to hold up through years of family dinners. And the contemporary, cherry finish will look great with the decor in your RV.
Looking for a complete table with legs? We offer this tabletop with a single leg kit (e95CR, e35CR) and a dual leg kit (e76BR, e89BR) as well.
Unlike other furniture that have raw wood edges, this long-lasting tabletop has edge banding trim around all 4 sides to prevent peeling, cracking, or warping. That means it won't break if one of the kids accidentally drops a drinking glass, and it'll seal out the moisture from the spilled water.
There are 3 white circles on the back, which give you a general suggestion for where to mount your existing leg kit. For the best table stability, we recommend installing a 1-leg kit onto the middle circle and a 2-leg kit onto the outer circles, or no more than 24" apart. But you can install the leg kit anywhere along the internal steel mounting plate. The 30" x 10" plate will help improve screw retention for when you attach the leg kit to the tabletop.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff with etrailer.com. Today we're gonna take a look at the replacement etrailer 36 inch by 30 inch cherry wood RV dinette tabletop with the black trim. Now this part will replace or upgrade the tabletop that's on your etrailer RV dinette table or it can be used with other dinette brands of the same size. This one is designed to work as a direct replacement for the etrailer dining tables, part number e35CR and e95CR. Both of those are sold separate on our website. Now this is just for the tabletop itself.
It will require one or two table leg kits, for a complete setup, and those table leg kits we do sell separately. We have a flush mount table leg for the dinette table, it's part number e69RR. And we have a surface mount table leg, it's part number e79RR. And those are listed as a related product on this product page. Now this is a nice cherry wood-grain laminate provides a perfect accent color for your existing decor.
And if you look at the edging right here, has a nice black edging around the tabletop and that adds a nice contemporary feel. It is an ultra-strong, high-density EPS foam tabletop core to ensure durability and stability. And the edge banding, right here, you just zoom in so we can see it up close. You can see the banding that goes around the whole edge of the table. This will reinforce the table sides and help seal the moisture out.
Prevents the tabletop from peeling, cracking, or warping. Now on the very underside of this tabletop, they flip it up here and notice there's three large circles. Basically, that shows you where the internal screw plates are which are inside the table here. This will assist with screw retention when you're attaching your table legs to the table. Basically, if you attach one table leg it'll go right in the middle here on this circle.
If you're gonna attach two table legs, you'll use the two outer circles. And again, the circle will fit the leg or the table leg mounting surface. It'll fit into there, and then that'll let you know that you'll be able to screw it in there. On the inside core, there is a metal bracket that the leg would attach to. Now this part is made in the USA. Few dimensions on this. The length, if we go from this edge to this edge is 36 inches long. The width, 30 inches wide, and the thickness on this tabletop is 1.25 inches. Total weight on this is 20 pounds. That should do it for the review on this replacement etrailer 36 inch by 30 inch cherry wood RV dinette tabletop with the black trim..
Average Customer Rating: 4.3 out of 5 stars (3 Customer Reviews)
Stylish, sleek dinette tabletop has cherry wood-grain finish that matches the decor in your RV or camper. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack. Leg kit sold separately.The problem I have , was that the screws that hold table in place would strip out . Need to place reinforced plate at end.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.