Correct Slide Out Topper for 95-3/8 Wide Slide Out

Question:

My slide-out is 95 3/8 inches wide. I am confused if I should order by the fabric width or the awning width. Please advice which black unit I should order.

asked by: Jim D

Helpful Expert Reply:

For determining the proper size Solera Slider you need, measure the total width of your slide room from the outside including the flange then add approximately 5" (2-1/2" each for the left/right side overhang). You can have greater than 2-1/2" overhang if you want, but it is suggested that you do not go less as long as there is enough space for mounting. If your provided measurement is from outside flange to outside flange with resulting measurement of 95-3/8", I suggest going with something at least slightly over 100-3/8' in fabric width. You can go beyond the overhang of 2.5" each side if you choose, no worries. Just do not go less than the suggested minimum for best results.

I suggest the Solera RV Slide-Out Awning, # LCV000168108 for black ( # LCV000163290, for white).

expert reply by: Michael R