Cushioned Shank For Use With Equal-i-zer Weight Distribution System

Question

Question:

I am looking for a shock absorbing hitch to use with my equilizer weight distribution hitch on my 2020 Ford F350 Crew cab Tremor edition. My travel trail is 7,000 lbs empty and max loaded of 9,000 lbs. What hitch would you recomend?

asked by: Craig V

0

Expert Reply:

We do have an option for you, though there isn't a standalone cushioned ball mount like the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount # C45949-22516 that is compatible or rated for use with a weight distribution system.

What you can use instead is a cushioned shank that is compatible with your Equal-i-zer weight distribution system; the Gen-Y Torsion Weight Distribution Shank will mount directly in your trailer hitch and you'll simply replace your Equal-i-zer's shank with this shank. So while not technically a ball mount, the Gen-Y shank does act as one, and cushions your ride for a much more comfortable towing experience.

Each of the Gen-Y shanks has a maximum rise and drop of 6-1/2 inches, and the correct one will depend on if your F-350 has a 2 inch or 2-1/2 inch receiver, as well as the total tongue weight of your loaded 9,000 lb travel trailer.

- 2" Hitch With Total Tongue Weight Between 400 lbs and 1,100 lbs: Gen-Y Torsion Weight Distribution Shank # GY54FR

- 2" Hitch With Total Tongue Weight Between 1,200 lbs and 1,700 lbs: Gen-Y Torsion Weight Distribution Shank # 325-GH-1202

Both of these shanks come with a pin and clip, though you can lock it to your truck's hitch with the Trailer Hitch Receiver Lock # e98880.

If you have a 2-1/2" hitch you will need a different shank, though I confirmed with the manufacturer you can also use the lower-rated # GY54FR with a reducer sleeve, the Gen-Y Hitch Reducer Sleeve - 2-1/2" to 2" # 325-GH-007.

- 2-1/2" Hitch With Total Tongue Weight Between 1,200 lbs and 1,700 lbs: Gen-Y Torsion Weight Distribution Shank # 325-GH-1102

This shank does not come with a pin and clip so you will need either Gen-Y Hitch Pin and Clip # 325-GH-099 or you can lock it with the Master Lock Trailer Hitch Lock # 1469DAT.

I have added links below to some video reviews for you to check out as well if you'd like.

expert reply by: Kyle S

0

Answer 1

It sounds like you already have a 50 foot power cord for your RV to hook up to shore power, the Epicord RV Power Cord with Handle - 50 Amp Male to Twist Lock Female Connector - 50' Long #277-000157. There is a simple solution to this by adding…

view full answer...

Answer 2

If liquid wrench or a WD-40 or PB Blaster type product did not work, you will have to cut off the lock. I have taken them off with little difficulty using a Dremel Tool or an angle grinder with a cut-off wheel. Make sure to wear eye protection. Some…

view full answer...

Answer 3

Rather than looking at separate systems you can use the Gen-Y Torsion Weight Distribution Shank #GY54FR to combine with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37101ET. This will give you the smoother ride and retain the sway…

view full answer...

Answer 4

Yes the Gen-Y Torsion Weight Distribution Shank part #325-GH-1202 has been designed for use with weight distribution systems and the holes are on the same 1.25" separation meaning the will fit together with no issues and give you a nice smooth…

view full answer...

Answer 5

I believe you were asking about the Gen-Y Torsion Weight Distribution Shank #325-GH-1302 because there is not a Gen-Y hitch that fits your 2018 Ram 2500. If so, the answer is yes, you can absolutely use that shank with an Equal-i-zer weight…

view full answer...

Answer 6

Yes. The Weight Distribution Shank for Gen-Y Hitch Adjustable Ball Mounts w/ 2" Receivers #325-GH-0352 has 1-1/4" spaced holes on the shank the same as a standard weight distribution hitch, so it will be compatible with the Equal-i-zer…

view full answer...

Answer 7

Most weight distribution systems mount on shanks that are 2" wide and have mounting holes that measure 1-1/4" apart on center. I spoke with my contact at Gen-Y Hitch who confirmed that the Torsion Weight Distribution Shank for 2-1/2"…

view full answer...

Answer 8

I verified with Gen-Y hitch that their torsion ball mounts, like part #325-GH-1225, can be used with other manufacturer's weight distribution systems, however it isn't the best option. Instead of one of the torsion ball mounts I recommend the…

view full answer...

Answer 9

Usually when we see cracking around the sidewall of a trailer tire it means it is starting to dry rot and needs to be replaced with a new tire, like the Westlake 235/80R16 #WE76FR. Tires have a lifespan of 3-6 years or 10,000-12,000 miles, whichever…

view full answer...

Answer 10

We can get you set up with the right ProPride P3 hitch, and for your 1,000 lb tongue weight, the best hitch is the following part number: - ProPride 3P Weight Distribution Hitch with Sway Control #PR97QR This is the correct ProPride hitch for your…

view full answer...

Answer 11

Bearings get hot from friction of the hub spinning around them on the spindle. Grease like #L54FR is used to lubricate the bearings which reduces the friction and helps keep everything cool. There is also a bearing packer, #L70025, that you would use…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...