Bolt and weld this plate onto your truck to get a mounting point for a pintle hitch (sold separately). Made to fit Chevy/GM 3500 cab and chassis trucks with 34" wide frames. Built-in, bottom-mounted ICC bumper provides underride protection.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at a Hitch Plate with Pintle Mount. The hitch plate feature multiple pintle hook mounting positions. So, you have one, two, three, four, or five holes. So, that's going to give you a four-position mount. One, two, three, and four.And it also has the D-rings. These are forged steel construction, measure 5/8 inch thick.
Those are great for your safety chain connection points or for recovery situations, and it features a pre-punched hole that fits most trailer electrical connectors.Now, again, it does offer four pintle hook mounting positions. These are separated on center side to side by 3 and 3/8 inches. Up and down, they're separated on center by 1 3/4 inches.The hitch plate is prefabricated and ready to use. The unit is made from a durable carbon steel construction. It has the nice 1/2-inch thick hitch plate, which includes the ICC bumper protection, as well.
It features a nice black powder coated finish to resist rust and corrosion.Now, this should be both welded and bolted to the frame. You've got the pre-drilled holes here on the side. One, two, three, four. So, four on each side plate.It fits Chevy and GMC trucks. Just consult the vehicle or chassis' owner manual before installing.
And it says for use with cab and chassis trucks with a nominal 34-inch frame width.The maximum gross trailer weight capacity is 20,000 lbs. Edge to edge, so from this edge here all the way over to this edge here, that's 62 inches long. That C Channel frame or bumper measures 3 inches wide. From very bottom to very top, it's 17 inches tall, and then outer edge to outer edge right here, is 35 1/4 inches. Inner edge to inner edge is 34 1/4 inches.That's going to do it for today's look at the Hitch Plate with Pintle Mount..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.