Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

See what our Experts say about this CURT Front Receiver Hitch

• Does Curt Trailer Hitch Receiver Fit 2007 Ford F-350 With Crossmember
  What you are referring to is the lower front crossmember, and if your 2007 Ford F-350 Super Duty does have that crossmember you can definitely install the Curt Front Mount Trailer Hitch Receiver # 31114. You will simply remove it (starting at about 5:45 of the video linked below), and the crossmember does get reattached (starting at about 10:05 of the video).
  view full answer...
• Correct Curt Front Mount Trailer Hitch for a 2004 Ford F-350
  I do have an option for you but the only Curt Front Mount Trailer Hitch Receiver option for a 2004 Ford F-350 is part # 31114.
  view full answer...
• Does Blocker Beam of 2006 Ford F-350 Dictate Which Front Hitch Fits
  This is correct. If you have the Blocker Beam on your 2006 Ford F-350 you will need to use the Draw Tite hitch # 65022 or if not you'd need the # 31114. The blocker beam is a small sub-bumper behind air dam.
  view full answer...
• Is There a Front Hitch for a 2002 Ford F-250 That Installs Under the Bumper
  The Curt Front Mount Trailer Hitch Receiver part # C31014 which is a fit for a 2002 Ford F-250 installs underneath the front bumper like what you're looking for so this is what I recommend. The other options like the Curt Front Mount Trailer Hitch Receiver part # 31114 install inside the front bumper.
  view full answer...
• Front Mount Hitch Fit for a 2005 Ford F-350 Super Duty
  The front mount trailer hitch I recommend for your 2005 Ford F-350 is the Curt Front Mount Trailer Hitch Receiver part # 31114 because it is made in the USA and currently our most cost effective option for a front mount hitch. I called Curt and they were not sure of where you were measuring to get a 37" frame but if you measure the distance between the two innermost mounting points (see photo) on the front end plate of your frame rail, you should get 31" and if you do the above will work...
  view full answer...
  
• Comparing the Curt Front Hitch 31114 and the Draw-Tite Front Hitch 65022 for a 2000 Ford F-250
  There are virtually no structural differences between the Curt Front Mount Trailer Hitch Receiver part # 31114 and the Draw-Tite Front Mount Trailer Hitch Receiver part # 65022 for your 2000 Ford F-250. They both install in the exact same location and allot for a 500/5,000 Lb vertical load and line pull rating. The main reason for the price difference is that the Curt hitch is made in the USA and has a more resistant powder coating. I have attached a sample install video for you as well.
  view full answer...
• Will the Curt Front Hitch for a 2007 Ford F-250 Work with Grille Guard
  The Curt Front Mount Trailer Hitch Receiver part # 31114 which is a fit for a 2007 Ford F-250 Super Duty installs behind the bumper beam to the end of the frame on both the driver and passenger side. I have attached a photo below which shows this. Unfortunately, we aren't able to confirm fit with aftermarket accessories so this will be up to you but based on the photo below you should be able to make the determination yourself. I did take a look at the grille guard and it does not appear...
  view full answer...
  
• Front Receiver for 2000 Ford F250 4x4
  If you do not have the blocker bar or sub-bumper behind the air dam, the Draw-Tite # 65022 would a good choice for your 2000 F250. According to the installation instructions, the tow hooks are temporarily removed but are re-installed later in the process. The Curt front mount receiver, part # 31114 will also work. It is nearly identical and would install in the same manner. I have provided a photo showing what the receiver would look like once installed.
  view full answer...
  
• Front Mount Trailer Hitch Receiver for 2003 Ford F-250 Super Duty
  While we do have a front-mounted trailer hitch receiver that fits a 2003 Ford F-250, the part model you asked about will not fit as it doesn't have the correct dimensions to line up with your truck and there are no brackets that will allow this. So for a front-mount hitch on your F-250 you can choose from a few different options, and I'll add some fit notes you'll want to be aware of for a couple of them. - Draw-Tite Front Mount Trailer Hitch Receiver # 65022 - Curt Front Mount Trailer...
  view full answer...
  
• Front Hitch that Fits 2004 Ford F-350
  I have a solution but the EcoHitch that you referenced does not fit your 2004 Ford F-350 as it fits newer Ford trucks and not yours. Instead the Curt hitch part # 31114 would be the option that I would recommend. It installs easily and has great weight capacities.
  view full answer...
• Do Fog Lights Have to Be Removed to Install Front Hitch # 31114
  It isn't ideal to have to remove the factory fog lights to install the front hitch part # 31114 that you referenced, but since their location is the best place for mounting this hitch there unfortunately isn't a better solution. I attached an install video for this for you to check out as well.
  view full answer...
• Will The Curt Front Trailer Hitch Receivers C31014 and 31114 Fit a 1999 Ford F-350 At The Same Time?
  Since the Curt Front Trailer Hitch Receivers # C31014 and # 31114 both use different mounting locations you will be able to have both on your 1999 Ford F-350.
  view full answer...
• Why is Curt Front HItch 31114 Difficult to Install on 1999 Ford F350 Super Duty 4x4
  Our contact at Curt Manufacturing said that it sounds like you have a blocker beam on your 99 F350 Super Duty 4x4. A blocker beam is a 3 inch by 1 inch steel bar that mounts underneath the frame on the front of the vehicle and could be the reason your hitch will not mount correctly. In that case you would need a Curt Front Hitch for the 1999 Ford F-250 and F-350 Super Duty part # C31014. However, if your truck is a cab and chassis model this hitch will not work either.
  view full answer...
• How to Pick out a Front Mount Hitch for a 1999 Ford F350
  The difference between the Curt Hitch # C31014 and Curt Hitch # 31114 is that the # C31014 is designed for vehicles with blocker beams and the # 31114 is designed for vehicles without the blocker beam. You will want to look under the front end of your 1999 Ford F350 to see if you have a blocker beam and order the correct front hitch for your vehicle. If you get under the front of your vehicle and see an L-shaped bracket attached to a beam that runs from one frame rail to the other you...
  view full answer...
  
• Will the Curt Front Mount Hitch # C31014 Interfere with Fog Lights on a 2001 Ford F-350 Super Duty
  We have not had a chance to install the Curt Front Mount Hitch, # C31014, on a 2001 Ford F-350 yet, but I did confirm with my contact at Curt that this hitch will not interfere with the fog lights. You will not have to remove or replace your fog lights with this hitch. Please note, this hitch will only fit models that have a blocker beam. The blocker beam is a small sub-bumper located behind the air dam. This hitch will install between the blocker beam and the blocker beam brackets. I...
  view full answer...
• Front Hitch Installation For 2002 Ford Excursion Diesel With Blocker Beam
  The front hitch designed for your 2002 Ford Excursion is the Curt Hitch, part # 31114. This is a custom fit hitch and has a 2 inch receiver opening. I called my contact at Curt and they told me they were not aware of a blocker beam being installed on an Excursion. They did tell me that the front mount hitch # 31114 would bolt to the brackets for the springs and the blocker beam would attach to the underside of the front mount hitch. They told me it would bolt into place like the 31014...
  view full answer...
• Front Hitch for 2003 Ford Excursion With Blocker Beam
  The instructions for both of the front-mounted hitches that are a fit for your 2003 Ford Excursion, the Draw-Tite # 65022 and Curt # 31114 reference the blocker beam, saying you'll need to remove and then reinstall it when putting on either hitch. This means, of course, that these hitches are not direct replacements for the blocker beam but either could still be installed.
  view full answer...
• Will Curt Spare Tire Carrier Hold a 19.5 inch Spare on a Ford F-450 With Front Mount Hitch
  We have two front mount receivers available for a 2004 F-450 cab and chassis. They are Draw-Tite part # 65022 and Curt part # 31114. I have added links to these parts and their install instructions below. I did some geometry with your 8 on 9 inch lug pattern and the bolt holes should line up so that you can at least 2 bolts of the wheel attached to the carrier. Whether or not you will clear the grille or bumper of the truck will take some measurements once a front hitch is installed, but...
  view full answer...
• Front Hitch Recommendation for a 2001 Ford F350
  Both the Draw Tite Hitch part # 65022 and the Curt Front Hitch part # 31114 are confirmed to fit your 2001 Ford F350, both will install the same and will have the same capacities. The Draw Tite has more reviews and they were all positive, so based on that and the fact that it costs a little less that's the route I would go. I attached an install video for you to check out.
  view full answer...
• Recommended Front Mount Hitch for 2021 Ford F-150 Hybrid
  For your 2021 Ford F-150 Hybrid I recommend the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31083. This is confirmed to fit all models, including your Hybrid. This hitch has a maximum line pull of 9,000 lbs and the maximum vertical load is 500 lbs. It sounds like you have the active grill shutter system, which will not be a problem when installing the hitch. If you have the active air dam, there is not a front hitch that will fit your vehicle.
  view full answer...
• Front Mounted Trailer Hitch for 2006 Ford Super Duty Truck
  A rear bumper trailer hitch cannot be mounted to the front of your 2006 Ford Super Duty. We do have a couple options for your front mounted hitch. We have the Draw-Tite Front Mount Trailer Hitch Receiver # 65022 and the Curt # 31114. Both these options will sit through the opening in the bumper. OEM Fog lights need to be removed or relocated for these hitches. I've attached instructions to help as well as videos.
  view full answer...
• Will Curt Front-Mount Hitch 31114 Fit 2003 Ford 550 Four Wheel Drive
  Curt front-mount trailer hitch # 31114 will fit the 2003 Ford F-550 cab-and-chassis but it will NOT fit the F-550 Super-Duty pickup. No front hitches are offered for the F-550 pickup. Curt hitch # 31114 does require some drilling for installation and it will also require you to remove/relocate the OEM fog lights. We also offer a similar front hitch from Draw-Tite, part # 65022, whose installation is shown in the linked video.
  view full answer...
• Front Mount Trailer Hitch and Light Bar Recommendation for a 1999 Ford F-250
  The Curt Front Mount Trailer Hitch, # 31114, that you referenced will fit your 1999 Ford F-250. If you have OEM fog lights, they must be removed because they will interfere with the front mount hitch. All of the light bars we offer for your 1999 F-250 are roof mounted light bars like part # CARR210701. The Gutterless Mount Kit, # CARR220052, is also required to mount a light bar to your truck. I have attached a link to all of the light bars we offer for your truck as well as a link to...
  view full answer...
• Comparison Between Draw-Tite # 65022 and Curt # 31114 Front Mount Receivers for 1999 Ford F250
  The primary difference between the Draw-Tite # 65022 and the Curt # 31114 is that they're manufactured by two different companies. The hitches are nearly identical in appearance, have the same weight ratings and would install in the same manner. Because of this, you can choose the less expensive Draw-Tite model, and not feel that you sacrificed anything. If you click the provided link, you can see an install video for the Draw-Tite model.
  view full answer...

Do you have a question about this Front Receiver Hitch?