Does Blocker Beam of 2006 Ford F-350 Dictate Which Front Hitch Fits

Question

Question:

i have 2006 f350 super duty..does the cross member determine witch hitch i need to purchase curt 3114 or draw-tite 65022

asked by: Paul

0

Expert Reply:

This is correct. If you have the Blocker Beam on your 2006 Ford F-350 you will need to use the Draw Tite hitch # 65022 or if not you'd need the # 31114. The blocker beam is a small sub-bumper behind air dam.

expert reply by: Jameson C

0

Answer 1

There are virtually no structural differences between the Curt Front Mount Trailer Hitch Receiver part #31114 and the Draw-Tite Front Mount Trailer Hitch Receiver part #65022 for your 2000 Ford F-250. They both install in the exact same location and…

view full answer...

Answer 2

I do have an option for you but the only Curt Front Mount Trailer Hitch Receiver option for a 2004 Ford F-350 is part #31114.

view full answer...

Answer 3

What you are referring to is the lower front crossmember, and if your 2007 Ford F-350 Super Duty does have that crossmember you can definitely install the Curt Front Mount Trailer Hitch Receiver #31114. You will simply remove it (starting at about…

view full answer...

Answer 4

The Curt Front Mount Trailer Hitch Receiver part #31114 which is a fit for a 2007 Ford F-250 Super Duty installs behind the bumper beam to the end of the frame on both the driver and passenger side. I have attached a photo below which shows this.…

view full answer...

Answer 5

The front mount trailer hitch I recommend for your 2005 Ford F-350 is the Curt Front Mount Trailer Hitch Receiver part #31114 because it is made in the USA and currently our most cost effective option for a front mount hitch. I called Curt and they…

view full answer...

Answer 6

The Draw-Tite 2-Inch Front-Mount Hitch, part #65022, will fit the Ford Super-Duty pickups for model years 1999 through 2007. It is compatible with pickups that are equipped with tow hooks (but these will need to be removed temporarily and…

view full answer...

Answer 7

The difference between the Curt Hitch #C31014 and Curt Hitch #31114 is that the #C31014 is designed for vehicles with blocker beams and the #31114 is designed for vehicles without the blocker beam. You will want to look under the front end of your…

view full answer...

Answer 8

If you do not have the blocker bar or sub-bumper behind the air dam, the Draw-Tite #65022 would a good choice for your 2000 F250. According to the installation instructions, the tow hooks are temporarily removed but are re-installed later in the…

view full answer...

Answer 9

The instructions for both of the front-mounted hitches that are a fit for your 2003 Ford Excursion, the Draw-Tite #65022 and Curt #31114 reference the blocker beam, saying you'll need to remove and then reinstall it when putting on either hitch.…

view full answer...

Answer 10

For your 2005 Ford F-250 XLT Super Duty, I recommend the Draw-Tite Front Hitch, #65022, which is designed to be mounted in the front of your vehicle. If you have the optional OEM fog lights on your truck, you must remove or relocate them for receiver…

view full answer...

Answer 11

Yes the install of the Curt front hitch part #C31014 on your 2003 Ford F-250 does use the front leaf spring bracket like you mentioned. I attached a picture I took from the install instructions (also linked) that shows how it all goes together.

view full answer...

Answer 12

In order to determine which is the correct front mounted trailer hitch for your motorhome (if available), I would need to know either the year, make, model, and floor plan of your motorhome or the year, make, and model of the chassis your motorhome…

view full answer...

Does Blocker Beam of 2006 Ford F-350 Dictate Which Front Hitch Fits

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching