Is There a Front Hitch for a 2002 Ford F-250 That Installs Under the Bumper

Question

Question:

Is there a front hitch that would have the receiver beneath the front bumper vs above the bumper? The hidden hitch such as the Curt 65022 would be too high.

asked by: Dave

0

Expert Reply:

The Curt Front Mount Trailer Hitch Receiver part # C31014 which is a fit for a 2002 Ford F-250 installs underneath the front bumper like what you're looking for so this is what I recommend. The other options like the Curt Front Mount Trailer Hitch Receiver part # 31114 install inside the front bumper.

expert reply by: Conner L

0

Answer 1

The front mount trailer hitch I recommend for your 2005 Ford F-350 is the Curt Front Mount Trailer Hitch Receiver part #31114 because it is made in the USA and currently our most cost effective option for a front mount hitch. I called Curt and they…

view full answer...

Answer 2

The Draw-Tite 2-Inch Front-Mount Hitch, part #65022, will fit the Ford Super-Duty pickups for model years 1999 through 2007. It is compatible with pickups that are equipped with tow hooks (but these will need to be removed temporarily and…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The Curt #31604 fits all models of the 1999 Dodge Ram 2500 with the exception of the Sport. As long as your truck is not the Sport model you will be able to install this on the front.

view full answer...

Answer 10

Good morning, Rich. I do have one resource which you should find helpful. I am sorry to say that at this time we do not have any pictures of videos of the Curt #C62ZV hitch being installed on a Cadillac Lyriq. Reason being we have not had this…

view full answer...

Answer 11

I'm happy to say that there is indeed both a trailer hitch and trailer wiring for your 2024 Chevy Trax. The fits for both parts on your '24 Trax are the following: - Curt Trailer Hitch Receiver #C75VV - Tail Light Converter with 4-Pole Flat…

view full answer...