Is There a Dutton-Lainson StrongArm Electric Winch With Wireless Remote

Question

Question:

Do any of these strong arm marine winches come with a wireless remote?

asked by: Dave

0

Expert Reply:

We do have options for winches that have a wireless remote, but each of the Dutton-Lainson StrongArm winches, such as the Dutton-Lainson StrongArm Electric Winch with Remote, AC Powered - 2,700 lbs # DL25019 come with remotes that are wired in.

I recommend checking out the ComeUp UW-5000si Trailer Winch - Wireless Remote # CU645010.

This is the lightest-duty winch with a wireless remote that works from up to 90 feet away and has a 5,000 lb static load pull rating.

I have added a link to a video review of the ComeUp winch, as well as a link to out selection of winches with a wireless remote and our selection of Dutton-Lainson winches with a wired remote.

expert reply by: Kyle S

0

Answer 1

We may be able to help you narrow it down. I was not able to find any kind of build sheet that would tell me exactly what bridge is used in the Dayton 5W474 winch that you mentioned. It is really not possible to say with certainty if it will work or…

view full answer...

Answer 2

I went out in the warehouse and measured the diameter of the holes in the #DL24110 mounting bracket and the round holes measured 3/8-inch in diameter and the oblong holes measured 3/8-inch by 3/4-inch. So, the largest diameter bolt you could use…

view full answer...

Answer 3

We definitely have some trailer jacks you can use as a replacement for your Dutton-Lainson but it doesn't look like anything we have will work as a direct replacement. If you'd like to stick with the Dutton-Lainson brand then I recommend…

view full answer...

Answer 4

In regards to the Dutton-Lainson StrongArm Electric Winch part #DL25215, the winch wiring harness is designed to attach to a vehicle battery and then run from the front back to the bumper so you can attach to the winch on the trailer when needed.…

view full answer...

Answer 5

The Dutton-Lainson Electrical Quick Connect for TW4000 Electric Winches, #DL24086, accepts up to 10 gauge wire. To secure the wire, you will need to solder it into place as it cannot be crimped. This product is designed for use with TW4000 electric…

view full answer...

Answer 6

I spoke to my contact at Dutton Lainson and they informed me that the Dutton Lainson Adapter plate part #DL24059 that you referenced is 7.7 inches long and 5.50 inches wide.

view full answer...

Answer 7

The Dutton-Lainson StrongArm Electric Winch w/ Remote #DL25019 has a die-formed base that allows for quick and easy mounting to a variety of surfaces. I've attached a photo to this answer that shows the holes in the base of this winch that…

view full answer...

Is There a Dutton-Lainson StrongArm Electric Winch With Wireless Remote

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching