Will E-Track D-Ring Fit E-Track Vertical System On Utility Trailer

Question

Question:

I have an E-Track vertical system on my utility trailer and need to replace one of the Cargo D Rings. I am looking at your 6K part # 59147. It looks like an updated version of what I am looking for. Mine is approx. 2 3/4 inches long at the base and 1/2 inch wide. Will this work for me? Thanks

asked by: JOE

1

Helpful Expert Reply:

The Erickson E-Track D-Ring, part # 59147, is designed to work with either the horizontal or vertical e-track system so it should work well for your system in your utility trailer.

I have attached a product review video for this D-Ring you can check out.

expert reply by: Jeffrey L

1

Answer 1

You are correct that is a 3,500 lb axle. If you want a bearing kit the #BK2-100 you looked at is the right one. This comes with a #L44649 outer and #L68149 inner bearing along with a #58846 (10-19) grease seal. If you want a replacement idler hub you…

view full answer...

Answer 2

I didn't receive your photos, but the manner in which you attach the e-track to your trailer deck will completely depend on what the deck is constructed of and where exactly on the deck you'll be placing the e-track. Without knowing any…

view full answer...

Answer 3

The CargoSmart Horizontal or Vertical X-Track - Matte Black - Steel - 667 lbs - 5' Long #3481788 will attach directly to the vertical metal frame on your trailer. You will use Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc…

view full answer...

Answer 4

Thanks for the picture! Yes, the BOLT Trailer Hitch Receiver Lock - 2", 2-1/2", and 3" Hitches - Ford Side-Cut Key item #BL7023585 will work with your key fob. This system is confirmed to fit your 2019 Ford F-250 Super Duty's key.…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The CargoSmart Horizontal or Vertical X-Track item #3481788 weighs 8 lbs. The tracks are sold individually and are 60" long x 5" wide x 1/4" tall.

view full answer...

Answer 7

The break strength of the CargoSmart Horizontal or Vertical X-Track #3481787 is 2,000 lbs which E-track on the other hand has a break strength of 6,000 lbs like the part #E19148. Working load limit for the E-track is 2,000 lb. The longer sections…

view full answer...

Answer 8

You might be able to use wheel bolts like #RG02-020 for a set of 4 which are fine threaded. Wheel bolts are used instead of lug nuts for hubs that have thread holes in them rather than the studs sticking out.

view full answer...