Availability of 2-Slot E Track Horizontal Track with Black Powder Coat Finish

Question

Question:

Is the 2-Slot E Track horizontal track available in the black powder coat?

asked by: Dave

0

Expert Reply:

I have a few of options for you, but this exact Erickson 2-Slot Horizontal E-Track # EM19145 isn't offered with a black powder coat finish.

The Erickson Mini E-Track Plate # EM09134 is the closest option I have. It also has 2 horizontal slots and a nice matte black powder coat finish for superior corrosion resistance and adds a nice rugged look to it as well. This plate has a safe working load limit (WLL) of 800 lbs and a maximum load (break strength) of 2,400 lbs, which is much lower than the # EM19145, but should still be plenty for most applications.

Another option which I really like is the CargoSmart Horizontal or Vertical X-Track # 3486500. The X-Track allows you to use the single anchor slot on the e-track however you want, either vertically or horizontally, so instead of having to choose which one to buy depending on your application, or needing to buy two different ones, the X-Track serves both purposes.It features a similar matte black finish and has a WLL of 667 lbs with a max break strength of 2,000 lbs. The best part about it is that it's fully compatible with any e-track accessory that you may already own, like the E-Track Tie Down Ring # 59147, E-Track Strap with Ratchet # EM59136, or E-Track Wood Beam Socket # 59149, just to name a few.

If you're looking for a higher capacity, we also have the Snap-Loc E-Track Tie-Down Anchor # SLSB, which has a 1,000 lb WLL.

expert reply by: Carla M

0

Answer 1

The chock included with the #EM09160 Tie Down Kit is 5-3/16 inches wide, 8 inches long and 2-1/8 inches tall. The mounting holes are 4-1/2 inches across, measured center to center. The closer set of holes are 2 inches apart, with the distance from…

view full answer...

Answer 2

It is not required to use a backing plate with the Erickson Mini E-Track Plate part #EM09134 but if you want to use one, that is perfectly fine you'd just need to make your own as we do not offer one for this. In regards to hardware, I'd…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.

view full answer...

Answer 6

With plywood walls that are as thin as yours, it's possible that they may not support what you are looking to do. The only way you will be able to utilize the Erickson Horizontal E-Track #EM59150 (2 feet) or #E19148 (5 feet) is by installing it…

view full answer...

Answer 7

Your 4-pin/5-wire wiring harness is what is called a "wishbone" type which simply means that there are two separate running light wires, one brown and one pink. This allows a separate running light wire for each side of the trailer which…

view full answer...

Answer 8

The first thing I recommend doing is to check that the ground wire for the lights is securely attached to a clean metal surface on the trailer frame. A loose ground wire will keep the lights from working. If the ground attached to the trailer does…

view full answer...

Answer 9

I didn't receive your photos, but the manner in which you attach the e-track to your trailer deck will completely depend on what the deck is constructed of and where exactly on the deck you'll be placing the e-track. Without knowing any…

view full answer...

Answer 10

Installing the E-Track Trailer Cargo Control, part #EM59150, would work well to strap down your ATVs and motorcycles on your V-nose trailer. You could mount the E-Track sideways or perpendicular to the trailer frame over the floor as you described.…

view full answer...

Answer 11

You can absolutely install E-Tracks like the etrailer Horizontal E-Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4 #e42VR you were looking at in your Forest River Enclosed Cargo Trailer yourself. Now there are a few things to…

view full answer...

Answer 12

It depends on how much load you will be applying to the track, what you are holding with it, and how the trailer frame is made. If you can get to the trailer frame, use nuts and bolts to attach through the floor and the metal trailer frame. If you…

view full answer...

Availability of 2-Slot E Track Horizontal Track with Black Powder Coat Finish

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching