Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
Retail:$45.95
Our Price: $33.63
You Save: 27%
Confirmed to Fit
2021 Ram 3500
with factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (624)
- Q & A (0)
- Photos
2021 Ram 3500 - Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- CURT
Quickly and easily install a 4-way trailer connector on your Ram 3500 with this custom harness. T-connector plugs directly into 7-way OEM tow package wiring harness - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Designed for use with a factory tow package that has a 7-way connector
- Retains 7-way connector functionality
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection points behind rear bumper
- Plug in T-connector
- Comes with dust cap for 4-way flat connector
- Limited 1-year warranty
Installation
This custom-fit T-connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper. Simply plug the harness in-line with your existing 7-way wiring harness.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
55384 CURT T-Connector - OE 4-Flat Upgrade
Item # C55384
Installation Details
California residents: click here
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector - C55384
Average Customer Rating: 4.8 out of 5 stars (624 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into 7-way OEM tow package wiring harness - no cutting, splicing or tapping required.by: Vincent 03/21/2023
Quick & easy trailer wiring harness replacement . took less than 15 minutes
by: Slpugh04/22/2024
2005 Chevrolet Silverado
Installation was very easy and only took about 15 minutes to hook up and secure wiring on truck.
by: Gerald03/23/2024
2005 Ram 2500
Top quality trailer hitch at a very reasonable price!
Chevy 2500 HD 2005 Duramax
by: Donald 02/27/2024
This product was exactly what was portrayed on line. Wiring harness was very simple to install and works extremely well.
by: Dan 11/15/2023
Yup. Still works after a year in operation. The only thing I am unhappy with is my vehicle thinks there is always a trailer connected and the backup sensors and side sensors are automatically disabled.
by: Jerry 05/14/2024
Works well easy plug and play
by: Mcrae11/18/2023
When I finally installed it about 3 months ago, the plug in connectors did not match what I had on my truck. I ended up just cutting them off and splicing them into the connector from my truck
by: Nathan 03/26/2024
2014 Chevrolet Silverado
Exactly as described. Fit perfectly into my 2014 Silverado bumper outlet.
by: Christopher 03/29/2024
2017 Jeep Grand Cherokee
Easy plug and play simple installation.
by: Julie 05/20/2024
No issues thank you
by: Tony B.12/15/2018
2018 Dodge Ram Pickup
I installed my Curt T-Connector today to my 2018 RAM 1500 Sport 4x4 Crew Cab. The mileage on the truck is at 10679km's. Although warned that the spare tire might require removal (via web site info from fellow RAM owners) that was not the case as there was enough room to remove the OEM connector (which is the short end of the assembly) from the factory housing. The actual disconnect and re-connect took only a couple minutes. I spent a about 15 or 20min's trying different wiring run routings for the aux. four connector plug wiring run. Some tie-wraps where installed to snug things up out of the way and I was done. I also dosed the connections with a shot of Krown 77 lube/rust inhibitor. I'm in the "Great White North" so salt use on roads is a given during the winter months. A quick test run of the lights and I was done. The build quality of the T-Connector is very good..equal to OEM or better I'd say.
by: Kirk 05/09/2024
Easy to install
by: Richard07/23/2023
2001 Chevrolet Silverado
Unfortunately, the product ordered did not fit my application and I will be returning!
Jenny N.
7/26/2023
I wanted to ask if your 2001 Chevy Silverado came with the tow package? Did you already have a factory seven way? If not, the part # C59236 would be the better fit.
by: Scott 11/02/2023
Fast delivery, and easy to find products. Second trailer hitch I bought from e-trailer. Great products
by: Virgil06/06/2022
Was exactly as stated in description. Just unplugged old plug and plugged in new one. I had two plugs to replace and added an extra "T" plug for another 4 prong. It only took less than 15 minutes to install all 3. Customer service is wonderful. Everything I have bought from ETrailer is top notch and delivered on time or earlier.
Virgil
6/7/2023
Working GREAT. Easy to install
by: Jason m07/20/2019
Awesome!! I bought an OPT7 triple LED light bar for my Chevy Colorado and I didn’t want to splice wires or lose a whole lot of time trying to figure out how to wire it up so I googled and I came across a gentleman who used this product and Im very thankful for this connection and my light bar works smoothly and I have full use of the reverse camera AND I don’t have any wire mess outside or underneath my truck! Easy to install, my first time doing this and it literally took me about 2 minutes, if that! Definitely would recommend this product to anyone with a truck!! Thank you guys!!
by: Michael 05/09/2024
2003 GMC Yukon
Perfect fit!
by: Andy l. 08/18/2017
2013 Jeep Grand Cherokee
Order class iii hitch and wiring harness for my 13 keep grand Cherokee . Came next day. Installed in 20 minutes. Great product. High quality and easy install
Product was shrink wrapped, taped and boxed ver professionally. Website also very easy to use
Would definitely recommend to anyone
by: Pat M08/28/2013
2013 Chevrolet Avalanche
Easy to install works great shipping and communications was fantastic. Now my USMC LED light hitch cover is on the truck without an adapter.
by: Raymond03/15/2018
This is a great vehicle to trailer wiring harness just plug it in and you're ready to go and that's all they are to it plug and go and I recommend it.
by: Miseal12/07/2022
2019 Ford Ranger
Easy instructions, installation was a breeze. Very important to torque bolts down to spec. Also will need to have dealer “flash” vehicle to activate trailer lights. 5 stars
by: Anita 04/03/2024
2011 Ram 1500
Arrived on time and just what I need.
by: Martin m07/22/2017
Perfect fit. Took 20 minutes to install wire harness and hitch receiver.
by: Rod A12/30/2021
This T-Connector is working great. Installation was simple. It was truly plug n play.
I used it to connect a LED light bar on back of truck; allowed me to install the light without using the existing trailer connector, so it is still available.
Rod A.
12/31/2022
Its been a year since I installed the T-Connector. And it is still working like brand new no issues with this connector. Provides a great convenience not having the share the OEM trailer slot.
by: J10/19/2023
Did not match my plug into car. So could not use and returned.
Katrina D.
10/21/2023
Can you please provide a picture of the underside where the plug is supposed to be located? For vehicles with the factory tow package; your install may require additional components or may be used as a replacement harness.
25
624
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- 7-Way Solution to Install Curt 4-Way C55384 on Vehicle with Wired 7-WayIf you replaced the wired 7-way of your 2019 Nissan Frontier with the 7-way/4-way kit part # HM40975-11998 you'd be able to install the # C55384 inline with the connector.
view full answer... - Harness to Add 4-Way to 2014 Chevy Silverado 1500 with 7-WayI am not sure what 4-way kit you are referring to but if you wanted to add a 4-way to your 2014 Chevy Silverado 1500 that has the factory 7-way all you'd need is the Curt kit part # C55384 which installs by plugging inline with the 7-way connector which also allows you to keep your 7-way.
view full answer... - 4-Way Recommendation for a 2012 Chevy Silverado that has a 7-WaySounds like you have a 7-way at the rear of your 2012 Chevy Silverado and are looking for a 4-way trailer connector as well. For that I would recommend the Curt harness part # C55384. This will plug inline with the 7-way connector you have and will provide you with a 4-way while still keeping your 7-way functional as well.
view full answer... - Best In-Bed 5th Wheel/Gooseneck Trailer Wiring for a 2015 Chevy Silverado 3500HDAbsolutely. Since your 2015 Chevy Silverado 3500 came with a factory installed 7-Way you will be able to tee into the existing harness to install in-bed 5th wheel wiring. You can use # 41157. It will plug in line right behind the factory 7-Way. I have included a link to a video showing installation on a 2014 model for you.
view full answer... - Recommended Hitch and Ball Mount for a 2017 Audi Q7Thanks for the picture! The Curt Trailer Hitch item # C13277 you referenced is confirmed to fit your 2017 Audi Q7. This hitch is custom fit and bolts to your Audi with included hardware. To be level you will typically want your ball mount to be within 3" of the height of your trailer's coupler. The receiver on your Audi will be right at 12" above the ground so you will want to use the Curt Ball Mount for 2" Hitches item # C45338. This ball mount will give you 7" of rise. You will also...
view full answer...
- Adding 4-Way to Nissan Frontier with 7-Way to Power LightbarYou could use the Curt 4-way part # C55384 for what you are looking for. This will plug into the 7-way at the rear of your 2019 Nissan Frontier and give you a 4-way you could route to your tailgate lightbar.
view full answer... - Does Curt T-Connector C55384 Fit A 2008 Chevrolet Trailblazer LT with Factory Tow Package?The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C55384 you were looking at is confirmed to fit your 2008 Chevrolet Trailblazer LT, and will require you to unplug the US Car connector from the back of the 7-way connector. The # C55384 will install in-between your 7-way connector and factory tow package wiring. I included a video of the # C55384 for you to take a look at.
view full answer... - Troubleshooting Trailer Wiring on 2013 Ford ExpeditionI did not find purchase history for you to confirm which wiring kit you have installed in your 2013 Ford Expedition but if you have recently installed one of the kits intended for your vehicle (shown on the linked page) and you do not have output on the contacts for the trailer there are a few things to check. If your wiring has been on the vehicle and has suddenly stopped working then the likely causes are blown fuses, bad relays or corrosion in the connectors. First, make sure that your...
view full answer... - Parts Needed to Add 4-Way to 7-Way of 2012 Ram 1500Yes you could install the Curt 4-way kit part # C55384 which will plug inline with your current 7 and 4-way and give you an additional 4-way that's active.
view full answer... - Trailer Hitch Recommendation for 2019 Ram 1500 Classic for Small Utility Trailer TowingFor a light duty towing application for your 2019 Ram 1500 Classic without the towing package the hitch you'd want is the etrailer.com part # E98852 because it's an easy install, has more capacity than you'd need at 6,000 lbs trailer weight, and has a great price. Since your truck has a factory 7-way and a small utility trailer would require a 4-way the wiring kit you'd want is the part # C55384 which installs in line with the 7-way and gives you a 4-way. Since you wanted to do some towing...
view full answer... - 4-Way Flat Trailer Connection Compatible With In-Line US Car AdapterI called my contact at Curt and we haven't seen a 2017 Honda Ridgeline yet to confirm a fit but have heard rumors that they were going to the US Car adapter plug that most vehicles now have. If that is the case with your Ridgeline, then the # C55384 will work with your vehicle.
view full answer... - 4-Way Recommendation for a 2013 GMC Sierra to Power Light BarWe have exactly what you need. The Curt Wiring Harness part # C55384 will plug inline with the 7-way/4-way you have at the rear of your vehicle and will give you an additional 4-way that you could use for a third brake light bar. We also carry third brake light light-bars that install under the tailgate, if you check out the link I attached you will see all that we carry that are confirmed to fit your 2013 GMC Sierra.
view full answer... - Recommended Trailer Wiring Harness and Ball Mount for 2009 Kia BorregoStarting with the trailer wiring harness, if your Kia Borrego is equipped with the factory 7-Way connector, the Curt T-Connector Vehicle Wiring Harness # C55384 that you referenced is the correct part. This custom harness will plug right into the built-in harness located behind the rear bumper. You will simply plug the harness in-line with the existing 7-Way. This will provide you with a 4-Way connector that will connect with and power your utility trailer's basic signal lights. Otherwise,...
view full answer... - Finding The Correct Wiring Harness For A 2017 Ford Explorer Base ModelIt looks like you have already tried installing a wiring harness like the Curt # C56172. The fact that it is not fitting could mean a few things. Firstly, the factory connector should not be hanging empty. It would be plugged in to the other end and you would have to unplug the factory connector to add in the T-harness. So it is possible you are trying to connect to the wrong plug. I have linked our install video below. If you fast forward to about the 1:20 mark you can see the factory...
view full answer... - Wiring Dome Light and Third Brake Light on a Camper Shell on a 2009 GMC Sierra SLEThe Curt T-connector # C55384 has a 4-Way flat connector on it. The functions that it carriers are running lights, left turn/brake lights, right turn/brake lights, and ground. If the dome light runs off of the running light circuit and the wiring on the camper shell has a converter that separates out the combined turn signal and brake lights to only include the brake light then this harness will work. However it is probably not likely that the camper shell is wired this way. If that is...
view full answer...
- 4-Way Recommendation for a 2010 Dodge Ram with 7-Way to Power LED LightbarThe 7-way of your 2010 Dodge Ram will separate easily to allow you to install the Curt T-Connector part # C55384 easily. Also, the current 7-way and 4-way you have on your truck will still be fully functional with this adapter installed. This would be the perfect solution for what you are looking to accomplish.
view full answer... - How to Add Second Trailer Connector to Rear of RVSounds like you are wanting to add a second 7-way to the rear of your 2017 Ford E-450 RV. The easiest way to do that is with the part # 41157. This plugs inline with the 7-way already there and then provides you with a second 7-way that is fully functional. If instead you wanted to add a separate 4-way you would instead want the part # C55384 which installs in the same way.
view full answer... - 4-Way Wiring Recommendation for a 2012 and 2014 Ford F150 for LED LightbarsWhat you could do is install a Curt wiring harness part # C55384. This will plug inline with the 7-way at the rear of your trucks and will provide you with an additional 4-way that you could route behind your bumper for your light bar.
view full answer... - Recommended Trailer Hitch for 2014 Chevy Silverado Regular CabThe most popular hitch for your 2014 Chevy Silverado regular cab is Curt Trailer Hitch, part # 14301. This is a 2 inch hitch rated for 1,000 pounds tongue weight and 10,000 pounds gross trailer weight. I have provided a link to the installation instructions for you to review. Also check out the attached installation video. This video features a 2013 Chevy Silverado but the installation is similar. I have also included a link to all available trailer hitches that are confirmed fits for...
view full answer... - Does Curt 4-Way Adapter C55384 Fit 2022 Nissan FrontierHey Jerry, yes the Curt 4-way adapter part # C55384 that you referenced does fit your 2022 Nissan Frontier.
view full answer... - Recommended Wiring Harness For Slide-In Camper On 2011 Ford F-250 With 7-Way If you just need a 4-way trailer connector for the slide-in on your 2011 F-250 you can use part # C55384. This plugs inline with the wiring under your truck for the 7-way. If you are wanting a 7-way connector for your slide-in I recommend part # 41157. This also plugs into the 7-way wiring on your truck. When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical connections and helps prevent corrosion.
view full answer... - Easy Way to Wire B&W Custom Headache Rack to TruckThe B&W Custom Headache Rack with LED Lights # BWPUCP7500WA is designed so that the two innermost lights will serve as taillights while the two on the outside work as brake/turn lights. These lights are fed by bonded 4-pole wiring like what is typically found in a 4-pole wiring harness. Your easiest solution is going to be to install a 4-way on the end of the wiring harness that comes with the headache rack like the # HM38134 so that you can plug it into a 4-way installed inline with...
view full answer... - Trailer Hitch Receiver and Other Parts Needed to Tow a Trailer with a 2009 GMC SierraIf your 2009 GMC Sierra is a 1500 then I recommend the Draw-Tite trailer hitch receiver, part # 75521. It has more capacity than most of the hitches without adding onto the price. I've linked a video of the install on a 2010 Sierra which will be the same for you. If your truck is not a 1500 then let me know so I can make the correct recommendation. Also, if you need trailer wiring I recommend part # C55384 for a 4-way connetor or part # 30955 for a 7-way. Whichever connects to your...
view full answer... - Can Curt T-Connector 4-Way C55384 Power Tailgate Lightbar While 7-Way Powers Boat Trailer LightsYou would not have any issue using the 4-way adapter part # C55384 as a way to power your tailgate lightbar while your 7-way powers the boat trailer lights. This is a common solution for your setup that would work just fine. Your boat trailer having LED lights would mean they draw considerably less too so you wouldn't have an amperage draw issue either.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Ryan G
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Jonathan Y
Video by:
Michael B
Installed by:
Jeff D
Installed by:
David F
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Vincent C.
3/22/2024
1 year & still works great, very easy plug & play setup. I recommend putting a small amount of white lithium grease on those connecting, helps protest against rusting.