7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
Item # HM40975
Our Price: $36.33
Confirmed to Fit
2013 Lincoln Navigator
with factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2378)
- Q & A (0)
- Photos
- Used (1)
2013 Lincoln Navigator - 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- 7 Round - Blade
- 4 Flat
- Trailer Hitch Wiring
- Hopkins
- No Converter
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your Lincoln Navigator's OEM wiring system and mounts with included bracket.
Features:
- 7- and 4-Pole trailer connector with mounting bracket
- Has high-impact, ABS plastic construction
- Stainless steel spring for easy cover operation
- Rubber gasket provides weather-resistant design
- Includes mounting bracket for easy, snap-in socket installation
- Black, epoxy-coated steel construction
- Mounts to bumper with included screws
Specs:
- Application:
- Replaces factory 7-way connector on Chevrolet, Ford, GMC and Nissan trucks and SUVs
- Can be used to add a connector to 2003 and newer GM pickups and SUVs
- Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep
- Distance between mounting holes (center to center): 2-3/8"
- 1-Year limited warranty
Note: Only one connector - a 4-way or a 7-way - can be used at a time because the covers on this socket will not open far enough to allow use of both plugs at the same time.
Similar to 11775, PK11893
40975 Hopkins 7- and 4-Way Trailer Connector Socket with Mounting Bracket - Lincoln Navigator End
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End - HM40975
Average Customer Rating: 4.8 out of 5 stars (2378 Customer Reviews)
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.by: ChrisP05/05/2024
This connector and bracket is a great product giving both 7 pin and 4 pin connections. I was able to reverse the bracket (making new holes) to allow it to fit behind the bumper cover piece that hides the hitch when not in use. The only drawback is that a wiring harness that fits the round 7 pin to the Buick Enclave rectangle plug is not available as a separate purchase. Had to buy an additional 7 pin outlet that came with the correct plug assembly and use that for my combo plug.
by: Michael07/12/2023
The box arrived opened and damaged. My wiring harness was missing. When I called to tell them my wiring harness was missing they told me that it was shipping separately but could not tell me when it would arrive. I later got an email telling me all of my items were delivered and asked me to leave a review. I still don't have my wiring harness and will not have the hitch installed by this weekend like needed because I don't know if I am ever getting my wiring harness.not to mention the box had no padding around the hitch so it's all scratched up.
by: 2006 Silverado 2500HD08/03/2023
Worked exactly how described, great replacement for my risty only bracket and 7 pin connector. Fits my 2006 Chevy Silverado 2500HD perfect, plug and play. Bought specifically because the bracket is included. And with both 4 and 7 pin connectors, I don't have to use an adapter anymore!
by: Jason06/24/2023
I am not sure how this bracket passed quality control. It sure is a good thing I'm not planning on using it. Really disappointing to see how quality is overlooked during the packaging process. This should have never left in this condition.
Jenny N.
6/30/2023
Oh! It is definitely not how we want the bracket to arrive to you. I will have our Customer Service team reach out.
by: Thomas 05/20/2024
This company is an absolute pleasure to work with. Item was delivered fast and exactly as described. This is the second item I’ve bout from etrailer the first being a 9000lb rated hitch. Will order again from these folks when if I need stuff for my truck.
by: James 02/28/2023
2021 Chevrolet Silverado 1500
Easy installation and very helpful installation video.
James
3/8/2024
One year later and no issues
by: Jim04/17/2024
It was easy to install and took care of the issue I had of one of the trailer light segments not working.
by: Brad 04/11/2024
I bought this because I needed the bracket and it was the quickest way to get it they do not stock the bracket alone. We where installing tommy lifts and needed t move the original connector which was installed on the bumper.
by: William 05/06/2024
took longer to remove the factory cover than to instal the connector. worked as advertised. I would buy this again if ever needed
by: Ali 12/30/2022
This thing couldn't be better. Easy mounting. Plug and play. I can now connect any trailer I want. Love it, love it, love it!
Ali
1/7/2024
This was a major upgrade for me at the time. A year later, Ive hauled massive loads across the country, and this connector harness works perfectly every time
by: Ron P03/17/2014
2014 Chevrolet Silverado
Here's some snaps of my Hopkins #40975 installation. I can confirm that it's an identical replacement for the 2014 Silverado 1500 trailer-light blank insert, no bracket required. It took me 30 seconds to plug the Silverado's OEM 7-pin round connector (located inside the blank insert) into the #40975 Wiring Kit and snap it into the cutout. Then I tested the flat 4-pin outlet of the #40975 with a 5 dollar 4-pin LED tester from West Marine, and all light functions tested good. Shweet! To remove the OEM blank plug, it helps to reach behind it and pinch the two spring clips holding it in place... same with the #40975 if it needs to be removed for some reason. When I ordered the part from eTrailer, your site had a comment, "This will not fit your vehicle. See below for compatible parts," or words to that effect. Maybe take a look at that and remove the comment, as the #40975 is an exact fit for 2014 Silverado 1500, no bracket needed. Thanks, eTrailer team!
Ron P.
3/19/2015
Although I havent towed since installing the Hopkins Pollak wiring kit since I installed it a year ago, I have tested the 4-pin connector for proper function using a 4-pin LED tester from West Marine and it checks out okay. Recently I inspected the kit for water intrusion mentioned by one of the raters, and I found no evidence of moisture inside the dual-connector compartment. On installation, I did make liberal use of the dielectric grease that accompanies the kit. Good product, easy installation, and great price.
by: Russell 05/21/2024
Plug and play baby! 2 minute install. Finally an easy fix to something!
by: Matt W07/07/2018
2017 Nissan Pathfinder
It came with it's own bracket, which is a plus. It was compatible with etrailer.com's part number C56357, which is also a plus. The self tapping screws being the only hardware coming with the item was a disappointment. I just installed etrailer.com's part number 76301 hitch receiver which has a mounting plate for brackets like this. The self tapping screws, which might have been effective, wouldn't have looked "professional." After finding some hardware which worked, it went on smoothly and fits well with the rest of the assembly.
Matt W.
7/7/2019
This product has been working well for the past year. I feel this was a smart purchase.
by: Rob09/22/2018
2015 Audi Q7
Scratched my head for a while, trying to find a quality way to connect this vehicle end 4/7 wire socket to my trailer ready (almost) 2015 Audi Q7. Finally decided that it really didn’t need to be bolted, but could be hose clamped to the existing heavy duty Audi bracket.
Mounted it sideways with a 1” diameter and a 3” diameter hose clamp. Be sure to use a 3” clamp with lots of serrations that all it to tighten it down a lot.
You’ll need to drill out the small hole of the supplied bracket to allow a clamp to fit through it. The other hole is a slot, and works unaltered. Small clamp on bottom, large clamp on top.
You’ll also need to relieve a small spot on the trim piece to make room for the 4-wire door to o-en freely. This is marked as red on one of the pictures.
Looks good and should work good!
Rob
9/22/2019
Good installation approach for q7’s. Keeps water from collecting in wiring junctions.
by: Dennis 02/08/2024
2010 Ford Van
This dual connector adds a professional looking touch to our tow wiring installation
by: Mike07/15/2023
7 and 4-Pole Trailer Connector Socket does not fit my towing vehicle.
Today I just received my etrailer order #114979486, that consisted of: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector (ITEM # C56431) and 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End (ITEM # HM40975) for my 2020 Ford Ranger. I easily installed the harness, but the Trailer Connector Socket does not seem to fit on the rear bumper, next to the license plate.
Last week, I chatted with etrailer customer support rep and I was assured that the connector Socket (ITEM # HM40975) would fit on my 2020 Ford Ranger.
This etrailer customer support representative referenced a previous Q&A Topic titled, "Can the HM40975 be used on a 2021 Ford Ranger". I was also assured that 2020 and 2021 Rangers have identically constructed rear bumpers.
Today, I spoke with a different etrailer customer support representative. This rep told me 7-Way Trailer Connector (ITEM # C56431) was not compatible with the 2020 Ford Ranger recommend reaching out to the manufacturer directly for more information.
I'm very frustrated!!!! Can I please get a solution to this issue ASAP.
Jenny N.
7/19/2023
I am sorry that this has been a frustrating experience, however I do have an answer for you. The Hopkins connector part # HM40975 is technically not a fit on its own for a 2020 Ford Ranger. The short reason why is that the Ford Rangers do not have the round US Carr type of connector to plug into. Now by adding the Curt harness part # C56431 like you did, does make that round connector that you can plug into the back of the Hopkins connector that will give you the 7 and 4 way you want. Since it is using two different manufacturer products together, I do encourage you to test the 4 and 7 way to make sure all the signals are working correctly. In theory they work together, however they are not tested. The issue is going to be that the bracket that comes with the Hopkins connector is not going to match with anything on the Ford Ranger to connect to. It would just be bolted to the bumper or you could also consider using part # C57202 to install it on your hitch.
by: Mark 03/20/2024
2018 Chevrolet Silverado 1500
Item received as described. It was simply plug and play. Out with the old, and the new was an exact replacement. Very satisfied.
by: Bert 03/28/2024
The self tapping screws that come with the mount are junk,
The product is Good.
by: Lonnie04/08/2024
Great product, it was just what I was needing to complete my project.
by: Bill04/07/2024
2020 Chevrolet Silverado 1500
Another easy installation old one out doing in 15 minutes
by: Doug 11/02/2022
Fit and works fine. My old one was just the 4 plug so now I don’t have to use the adapter for 7 prong anymore.
Doug
11/3/2023
Works fine- no issues.
by: Steven 04/21/2024
2022 Nissan Titan
Came in on time. The parts were in good shape and fit perfectly.
by: Guy05/22/2022
2003 GMC Sierra
Top quality trailer connector that fir original wiring harness perfectly.
Installed in under 15 minutes.
John C.
7/26/2022
Works great and looks great. Get compliments on the hitch.
by: RT12/13/2023
A very good option to cut down on rattle. This is a durable product that is fairly simple to install. My only complaint is the magnet to keep cover closed when not towing should be stronger. I am happy with the purchase and it looks like it will be useable for years.
by: 1957okie04/03/2014
Great product at a great price. It was an exact fit and looks great. I like having the ability to plug in my 7-prong plug on my travel trailer or the 4-pin plug on my boat, without needing an adaptor. Got super fast shipping too. Buying from etrailer.com was a win- win-win.
Bob R.
5/31/2014
What year is your silverado
Rachael H.
6/4/2014
Randy S.
6/6/2014
Its a 2014 Silverado 1500 Double Cab
25
2378
Show More Reviews
See what our Experts say about this Hopkins Custom Fit Vehicle Wiring
- Tekonsha # TK90160 Brake Controller NC or OC Error Message on 2018 Nissan PathfinderIf you find significant corrosion you may need to replace the connector with # HM40975 for the vehicle wiring or # H20042 for the trailer end. However, if cleaning the 7 way connector on your 2018 Nissan Pathfinder doesn't correct the errors then it's likely that you have a short on the electric brake circuit or there is a problem with the brake magnets themselves. What we first want to do is isolate either the vehicle or the trailer as the source of the problem. Using a circuit tester...
view full answer...
- 7-Way Trailer Connector on a 2005 Chevy Silverado is Not Charging the Trailer BatteryFirst, the wiring on a trailer connector is too small to charge up a battery on a trailer. It can only keep the battery at whatever charge level the battery is at. But if the connector is not showing power on the 12 volt circuit on the vehicle 7-Way (1:00 position if looking at the face of the connector) then there is a common cause. To test this circuit, use a circuit tester like # PTW2979 if you do not already have one. From 1999 to 2006 GM may or may not have made all the connections...
view full answer... - 7-Way Wiring Harness Installation on a 2004 1500 Chevrolet SilveradoYou can use the Pollak 7- and 4-Pole Trailer Connector Socket, item # HM40975, if you are replacing an existing 7-way connector on the rear of your 2004 Chevy Pickup. If you need to install the 7-Way connector for the first time the factory connection point is going to be on the left side of the vehicle above the spare tire. If there is a plug on the end of the wiring harness located above the spare tire, it will simply plug into the rear of the HM40975. If the harness ends in bare wires,...
view full answer... - Replacement Pigtail for 7-way Trailer Connector on 2015 Audi Q7It sounds as if you need the pigtail that connects to the American spec 7-way, is that correct? If so, you'd need part # PK11998. It's also sold together with the # HM40975 connector as part # HM40975-11998. If you're speaking of the gray retaining clip, it is included with the # PK11998 pigtail, but it's not available as a separately sold item. The product description page for the # PK11998 pigtail provides the wire color coding if you scroll down the page I've linked for you a bit.
view full answer...
- 7-Way and 4-Way Trailer Wiring for a 2007 Chevrolet Silverado ClassicThe factory plug you are referring to should be located above the spare tire near the center of the vehicle, you may need to lower the spare somewhat to find the connector. This harness will plug directly into the Replacement Multi-Tow 7-Way and 4-Way Trailer Connector, item # 30955, once the cap on the harness is removed. Once you have this connection made you will have a 7-Way and 4-Way connector at the rear of the vehicle. The Pollak 7- and 4-Pole Trailer Connector, item # HM40975,...
view full answer... - 7-Way/4-Pole Combination Wiring for 2018 Nissan Pathfinder All trailer wiring parts for the 2018 Nissan Pathfinder appear on the linked page. These include the item # HM40975 which is a Replacement combination 7-way/4-pole connector intended as a factory replacement. If you have no trailer wiring you can instead use kit # 118273 which includes relays, wiring and the trailer connector along with the part # HM40975 which will replace the 7-way included in the kit t give you both types of connections.
view full answer... - Will Draw-Tite Trailer Hitch Let Spare Tire Remain on 2001 Ford F-350?I took a look at the installation instructions for Draw-Tite # 41922 and you will be able to retain the spare tire on your 2001 Ford F-350 though it may need to be loosened for the hitch to install. I cannot guarantee that you will not have to move the connectors however. That would not be difficult however, as you can use the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975 which you'll only need to plug your factory wiring into and mount along the hitch. I've added...
view full answer... - Recommended Hitch For 2014 Volkswagen TouaregWe have just the things you need to install a hitch on your 2014 Volkwagen Touareg. The hitch we offer is the Curt Trailer Hitch, part # C13116. This is a Class lll hitch and has a 2 inch receiver opening. This is a bolt-on installation and requires no welding, and all hardware and instructions are included. If you plan on towing I recommend the etrailer.com Ball Mount Kit, part # 989900. This kit comes with 2 ball mounts, 2 hitch balls, the pin and clip, and a handy storage bag. I...
view full answer... - Trailer Hitch and Towing Equipment for 2015 GMC CanyonI have indeed confirmed with Curt Manufacturing that their Class III hitch you referred to, part # C13176 is a fit for your 2015 Canyon (which was likely assembled right across the street from our facility, by the way!) You might need the following to complete your towing system: 4-pole/7-way Trailer Connector, part # HM40975 Ball mount, part # C45010 1-7/8 inch trailer ball, part # 19260 2 inch trailer ball, part # 63845 Locking hitch pin, part # e98882 You can see other accessories...
view full answer... - Recommended Trailer Connector for 2020 Ford F-350 Cab and ChassisI don't have much information on Cab and Chassis models but so long as they have the standard US Car Connector then you can use something like the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket part # HM40975 for use at the bumper or the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector for Aluminum Beds - 7' Long # C57008 if you need to install it somewhere else.
view full answer... - Converting 4-Pole on 2008 Chevy Express to 4-Pole and 7-Way That Can Be Used Simultaneously Both the 7-way and the 4-pole of the # HM40975 are wired so they'll be active at the same time, but the doors or flaps that cover the plugs are designed in such a way that it's physically impossible to open both at the same time. You can use one or the other, but not both. You can easily install a 7-way, but how you'll proceed will depend on whether or not the trailers you'll be towing have electric brakes or not. If the trailers have brakes, you'll need to install a brake controller using...
view full answer... - Best Trailer Hitch Receiver and Wiring Connector For a 2021 Chevrolet Silverado 1500I recommend the Curt Trailer Hitch Receiver # C59UR as being the best receiver for your 2021 Chevrolet Silverado 1500. This class IV receiver has the highest weight rating of any receiver we offer. The maximum tongue weight is 1,000lbs and towing is 10,000lbs. The 7- and 4-Pole Trailer Connector Socket # HM40975 will replace the blank factory cover that is currently on your bumper. This OE type connector will include a 4-way flat connector as well as a 7-way connector. This means that...
view full answer... - Troubleshooting Wiring on 2004 Chevy Dually That Activates Trailer Brakes When Hazards Are OnIt sounds like you could have a corrosion issue in either the truck's trailer socket or the trailer's plug. What can happen is that corrosion can build up inside the socket or plug and cause two circuits that are next to each other to become bridged together. If you refer to the linked photo of a 7-way trailer socket you'll see that the brake circuit at the 5-o-clock position is next to the right turn/stop circuit at the 3-o-clock position. Chances are that either the truck socket or the...
view full answer...
- 7-Way and 4-Way Recommendation for a 2000 Ford F-250The Hopkins trailer wiring harness part # HM40975 has been confirmed to fit the trailer wiring connector you have on your 2000 Ford F-250 and will provide you with both a 7-way and a 4-way.
view full answer... - Replacement Trailer Connector and Wiring For 2011 Ford F-150For a replacement 7-way and 4-Pole Trailer Connector Socket w/ Mounting Bracket you would will need the part # HM40975. The 4' Pigtail mating connector and wiring harness # PK11998 serve as a bridge between your vehicle wiring and a 7-pole trailer connector. This harness will splice into your factory tow package. I have a linked video that shows at the 0:47 mark how to splice and connect the new harness.
view full answer... - Does Hopkins 7-Way part # HM40975 Fit 2002 Chevy Silverado 2500HDYes, the Hopkins 7-way part # HM40975 that you referenced does fit the round connector you sent in a picture of that you have on your 2002 Chevy Silverado 2500HD.
view full answer...
- Replacement 7-Way Trailer Connector Recommendation for a 2006 Ford F-150Sounds like the factory trailer connector you have on your 2006 Ford F-150 has a round connector, like what is in the picture I attached, has a 4-way wiring harness and a 7-way connector on the other side of it. I can assure you that the part # HM40975 that you referenced will plug into the round connector on your vehicle and will work just fine. Instead of using two connectors the # HM40975 combines them both into one connector. This has both a 4-way and a 7-way attached to it. I attached...
view full answer...
- Which Wire of Brake Controller Carries the Output CircuitThe white wire of a brake controller is actually the ground circuit. You'll never see voltage put on this wire from a brake controller. The brake output circuit is the blue wire of the controller. The black is for 12 volt power and the red is for stoplight circuit. If you connect the power and ground and then apply the manual override of the controller you will see voltage on the blue wire of the controller.
view full answer...
- 7-Way and Trailer Hitch Recommendation for 2019 Chevy Express VanSince you have the factory tow package wiring all you'd need for a 7-way is the part # HM40975 which attaches to the round connector you have at the rear of your vehicle and provides both a 7-way and a 4-way plus comes with a mounting bracket. Then for a hitch the etrailer hitch # e98861 is also a fit for your 2019 Chevy Express van. It's a really great option as it has higher towing capacities, installs very easily, and is priced great too. I attached an install video for this for you...
view full answer... - Recommended Trailer Hitch Receiver and 7/4-Way Wiring For a 2021 Jeep Grand Cherokee L I recommend the Curt Trailer Hitch Receiver # C97JR for your 2021 Jeep Grand Cherokee L. This receiver will mount behind the rear fascia and is hidden by the factory cutout when not in use. The Universal Wiring Harness # 22551 will give you a 7-way connector and the wiring needed to make if function. You can replace the included connector for the 7- and 4-Pole Trailer Connector Socket # HM40975. This will give you the option of connecting the 7-way or 4-way connector without needing an...
view full answer... - Troubleshooting Tekonsha # 39510 Voyager Brake Controller That's Intermittently Reading the TrailerIt sounds like you have an intermittent connection problem. The vast majority of the time, this is caused by a dirty, damaged or corroded trailer connector. Examine the connector on your vehicle and on the trailer. Look for any damage and replace the connectors if needed. Part # HM40975 would be a good replacement for the vehicle, and # A7WCB for the trailer side. Check the pins and sockets of the connectors for any white or green corrosion. If the corrosion is severe, it might have spread...
view full answer... - 7-Way Wiring and Brake Controller for 2017 Chevrolet Express 3500 15 Passenger VanIf your Express 3500's connector near the bumper resembles the round U.S. Car type connector in the photo I linked then this will be the trailer tow package connector you will use to plug in a 7-way trailer socket like # A10-7072VP or # HM40975. With or without the tow package wiring you can still install a 7-way using the kit # ETBC7 you referenced along with a 4-pole harness # 118392 which plugs in at the tail lights. This setup will be independent of any factory wiring and it will provide...
view full answer...
- Choosing Between Curt C15312 and C15313 Hitches for 2006 GMC Sierra 3500The correct trailer hitch for your 2006 GMC Sierra 3500 SLT Crew Cab is the Curt Trailer Hitch Receiver # C15312. This American made extra heavy duty class V receiver is compatible with your factory step bumper shown in the photo you provided. It has a towing capacity of 16,000 lbd and a max tongue weight limit of 2,400 lbs, perfectly equipped to tow your 14,000 trailer. I have attached a photo of the # C15312 installed on a similar year Silverado with the same style bumper to give you...
view full answer...
- Why Would 7-Way Unplug While Towing with a 2015 Chevy Silverado 1500Are you sure you don't have a long enough trailer wiring harness? We haven't had any issues with 7-ways pulling out of the # HM40975 that is the same connector as what you have on your 2015 Chevy Silverado. That makes me think you just may have too short of a harness. Plus, we don't offer a 7-way that will fit the opening on your vehicle that opens up instead of down. For an 11 foot 7-way plug and lead you would want the part # HM20048.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Joe B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Matthew B
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Video by:
Andrew K
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
Video by:
David F
Video by:
Aidan B
Video by:
Thomas T
Written by:
Tyler C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
8/3/2023
I am sorry to hear that your order arrived in this condition. I see that our customer service department is currently working on a solution for you.