7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
Item # HM40975
Retail:$59.91
Our Price: $36.62
You Save: 39%
Confirmed to Fit
2001 GMC Sierra
with factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2372)
- Q & A (0)
- Photos
2001 GMC Sierra - 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- 7 Round - Blade
- 4 Flat
- Trailer Hitch Wiring
- Hopkins
- No Converter
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your GMC Sierra's OEM wiring system and mounts with included bracket.
Features:
- 7- and 4-Pole trailer connector with mounting bracket
- Has high-impact, ABS plastic construction
- Stainless steel spring for easy cover operation
- Rubber gasket provides weather-resistant design
- Includes mounting bracket for easy, snap-in socket installation
- Black, epoxy-coated steel construction
- Mounts to bumper with included screws
Specs:
- Application:
- Replaces factory 7-way connector on Chevrolet, Ford, GMC and Nissan trucks and SUVs
- Can be used to add a connector to 2003 and newer GM pickups and SUVs
- Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep
- Distance between mounting holes (center to center): 2-3/8"
- 1-Year limited warranty
Note: Only one connector - a 4-way or a 7-way - can be used at a time because the covers on this socket will not open far enough to allow use of both plugs at the same time.
Similar to 11775, PK11893
40975 Hopkins 7- and 4-Way Trailer Connector Socket with Mounting Bracket - GMC Sierra End
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End - HM40975
Average Customer Rating: 4.8 out of 5 stars (2372 Customer Reviews)
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.by: Michael07/12/2023
The box arrived opened and damaged. My wiring harness was missing. When I called to tell them my wiring harness was missing they told me that it was shipping separately but could not tell me when it would arrive. I later got an email telling me all of my items were delivered and asked me to leave a review. I still don't have my wiring harness and will not have the hitch installed by this weekend like needed because I don't know if I am ever getting my wiring harness.not to mention the box had no padding around the hitch so it's all scratched up.
by: 2006 Silverado 2500HD08/03/2023
Worked exactly how described, great replacement for my risty only bracket and 7 pin connector. Fits my 2006 Chevy Silverado 2500HD perfect, plug and play. Bought specifically because the bracket is included. And with both 4 and 7 pin connectors, I don't have to use an adapter anymore!
by: Jason06/24/2023
I am not sure how this bracket passed quality control. It sure is a good thing I'm not planning on using it. Really disappointing to see how quality is overlooked during the packaging process. This should have never left in this condition.
Jenny N.
6/30/2023
Oh! It is definitely not how we want the bracket to arrive to you. I will have our Customer Service team reach out.
by: Thomas 05/20/2024
This company is an absolute pleasure to work with. Item was delivered fast and exactly as described. This is the second item I’ve bout from etrailer the first being a 9000lb rated hitch. Will order again from these folks when if I need stuff for my truck.
by: James 02/28/2023
2021 Chevrolet Silverado 1500
Easy installation and very helpful installation video.
James
3/8/2024
One year later and no issues
by: Jim04/17/2024
It was easy to install and took care of the issue I had of one of the trailer light segments not working.
by: William 05/06/2024
took longer to remove the factory cover than to instal the connector. worked as advertised. I would buy this again if ever needed
by: ChrisP05/05/2024
This connector and bracket is a great product giving both 7 pin and 4 pin connections. I was able to reverse the bracket (making new holes) to allow it to fit behind the bumper cover piece that hides the hitch when not in use. The only drawback is that a wiring harness that fits the round 7 pin to the Buick Enclave rectangle plug is not available as a separate purchase. Had to buy an additional 7 pin outlet that came with the correct plug assembly and use that for my combo plug.
by: Ali 12/30/2022
This thing couldn't be better. Easy mounting. Plug and play. I can now connect any trailer I want. Love it, love it, love it!
Ali
1/7/2024
This was a major upgrade for me at the time. A year later, Ive hauled massive loads across the country, and this connector harness works perfectly every time
by: Brad 04/11/2024
I bought this because I needed the bracket and it was the quickest way to get it they do not stock the bracket alone. We where installing tommy lifts and needed t move the original connector which was installed on the bumper.
by: Russell 05/21/2024
Plug and play baby! 2 minute install. Finally an easy fix to something!
by: Ron P03/17/2014
2014 Chevrolet Silverado
Here's some snaps of my Hopkins #40975 installation. I can confirm that it's an identical replacement for the 2014 Silverado 1500 trailer-light blank insert, no bracket required. It took me 30 seconds to plug the Silverado's OEM 7-pin round connector (located inside the blank insert) into the #40975 Wiring Kit and snap it into the cutout. Then I tested the flat 4-pin outlet of the #40975 with a 5 dollar 4-pin LED tester from West Marine, and all light functions tested good. Shweet! To remove the OEM blank plug, it helps to reach behind it and pinch the two spring clips holding it in place... same with the #40975 if it needs to be removed for some reason. When I ordered the part from eTrailer, your site had a comment, "This will not fit your vehicle. See below for compatible parts," or words to that effect. Maybe take a look at that and remove the comment, as the #40975 is an exact fit for 2014 Silverado 1500, no bracket needed. Thanks, eTrailer team!
Ron P.
3/19/2015
Although I havent towed since installing the Hopkins Pollak wiring kit since I installed it a year ago, I have tested the 4-pin connector for proper function using a 4-pin LED tester from West Marine and it checks out okay. Recently I inspected the kit for water intrusion mentioned by one of the raters, and I found no evidence of moisture inside the dual-connector compartment. On installation, I did make liberal use of the dielectric grease that accompanies the kit. Good product, easy installation, and great price.
by: Matt W07/07/2018
2017 Nissan Pathfinder
It came with it's own bracket, which is a plus. It was compatible with etrailer.com's part number C56357, which is also a plus. The self tapping screws being the only hardware coming with the item was a disappointment. I just installed etrailer.com's part number 76301 hitch receiver which has a mounting plate for brackets like this. The self tapping screws, which might have been effective, wouldn't have looked "professional." After finding some hardware which worked, it went on smoothly and fits well with the rest of the assembly.
Matt W.
7/7/2019
This product has been working well for the past year. I feel this was a smart purchase.
by: Dennis 02/08/2024
2010 Ford Van
This dual connector adds a professional looking touch to our tow wiring installation
by: Rob09/22/2018
2015 Audi Q7
Scratched my head for a while, trying to find a quality way to connect this vehicle end 4/7 wire socket to my trailer ready (almost) 2015 Audi Q7. Finally decided that it really didn’t need to be bolted, but could be hose clamped to the existing heavy duty Audi bracket.
Mounted it sideways with a 1” diameter and a 3” diameter hose clamp. Be sure to use a 3” clamp with lots of serrations that all it to tighten it down a lot.
You’ll need to drill out the small hole of the supplied bracket to allow a clamp to fit through it. The other hole is a slot, and works unaltered. Small clamp on bottom, large clamp on top.
You’ll also need to relieve a small spot on the trim piece to make room for the 4-wire door to o-en freely. This is marked as red on one of the pictures.
Looks good and should work good!
Rob
9/22/2019
Good installation approach for q7’s. Keeps water from collecting in wiring junctions.
by: Mark 03/20/2024
2018 Chevrolet Silverado 1500
Item received as described. It was simply plug and play. Out with the old, and the new was an exact replacement. Very satisfied.
by: Mike07/15/2023
7 and 4-Pole Trailer Connector Socket does not fit my towing vehicle.
Today I just received my etrailer order #114979486, that consisted of: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector (ITEM # C56431) and 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End (ITEM # HM40975) for my 2020 Ford Ranger. I easily installed the harness, but the Trailer Connector Socket does not seem to fit on the rear bumper, next to the license plate.
Last week, I chatted with etrailer customer support rep and I was assured that the connector Socket (ITEM # HM40975) would fit on my 2020 Ford Ranger.
This etrailer customer support representative referenced a previous Q&A Topic titled, "Can the HM40975 be used on a 2021 Ford Ranger". I was also assured that 2020 and 2021 Rangers have identically constructed rear bumpers.
Today, I spoke with a different etrailer customer support representative. This rep told me 7-Way Trailer Connector (ITEM # C56431) was not compatible with the 2020 Ford Ranger recommend reaching out to the manufacturer directly for more information.
I'm very frustrated!!!! Can I please get a solution to this issue ASAP.
Jenny N.
7/19/2023
I am sorry that this has been a frustrating experience, however I do have an answer for you. The Hopkins connector part # HM40975 is technically not a fit on its own for a 2020 Ford Ranger. The short reason why is that the Ford Rangers do not have the round US Carr type of connector to plug into. Now by adding the Curt harness part # C56431 like you did, does make that round connector that you can plug into the back of the Hopkins connector that will give you the 7 and 4 way you want. Since it is using two different manufacturer products together, I do encourage you to test the 4 and 7 way to make sure all the signals are working correctly. In theory they work together, however they are not tested. The issue is going to be that the bracket that comes with the Hopkins connector is not going to match with anything on the Ford Ranger to connect to. It would just be bolted to the bumper or you could also consider using part # C57202 to install it on your hitch.
by: Bert 03/28/2024
The self tapping screws that come with the mount are junk,
The product is Good.
by: Lonnie04/08/2024
Great product, it was just what I was needing to complete my project.
by: Steven 04/21/2024
2022 Nissan Titan
Came in on time. The parts were in good shape and fit perfectly.
by: Doug 11/02/2022
Fit and works fine. My old one was just the 4 plug so now I don’t have to use the adapter for 7 prong anymore.
Doug
11/3/2023
Works fine- no issues.
by: Bill04/07/2024
2020 Chevrolet Silverado 1500
Another easy installation old one out doing in 15 minutes
by: RT12/13/2023
A very good option to cut down on rattle. This is a durable product that is fairly simple to install. My only complaint is the magnet to keep cover closed when not towing should be stronger. I am happy with the purchase and it looks like it will be useable for years.
by: Warren 04/25/2023
2005 GMCSierra
Fast shipping. Nice quality product
Warren
4/26/2024
Products still working great.
by: 1957okie04/03/2014
Great product at a great price. It was an exact fit and looks great. I like having the ability to plug in my 7-prong plug on my travel trailer or the 4-pin plug on my boat, without needing an adaptor. Got super fast shipping too. Buying from etrailer.com was a win- win-win.
Bob R.
5/31/2014
What year is your silverado
Rachael H.
6/4/2014
Randy S.
6/6/2014
Its a 2014 Silverado 1500 Double Cab
25
2372
Show More Reviews
See what our Experts say about this Hopkins Custom Fit Vehicle Wiring
- Parts Needed For Towing a Trailer With a 2022 Chevrolet BlazerFirst you will need the etrailer Trailer Hitch Receiver # e36YR for your 2022 Chevrolet Blazer. This receiver will fit all trim levels with the exception being the premier. It is rated for up to 750lbs of tongue weight and a trailer weight up to 5,000lbs. If you are using a weight distribution hitch the capacity increases to 6,000lbs. Be sure to verify with your Chevrolet dealer exactly how much your Blazer can handle and use the lower of these sets of numbers. For the wiring I recommend...
view full answer... - Part Needed to Convert 1999 Ford F-350 Trailer Wiring From 6-Pole to 7-Way RV Blade Type SocketYou can use the Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector # HM48470 to convert your Ford pickup from a 6-pole connector to the 7-way blade type connector (and you'll get a 4-pole and 5-pole flat included) or you can use the 7-way-only part # PK12-707E. Both have screw terminal connections on the back to allow you to join your existing wiring. The linked article on trailer wiring shows you the function format for 5th wheels. You can use a tester like # PTW2993...
view full answer...
- Brake Control Wiring on a 2004 Chevrolet SilveradoTo install a controller on your Silverado, you will need to choose a controller and the appropriate brake controller wiring adapter. I recommend the Tekonsha Prodigy P2 # 90885 and Wiring Adapter, # 3015-P. The P2 is a great unit for the price, and is very easy to install and set up. One end of the adapter harness plugs into the rear of the controller, the other end will plug into the connector located in the junction box behind the emergency brake pedal in your Silverado. I will link you...
view full answer... - Troubleshooting Trailer Wiring of 2003 Chevy Tahoe Not FunctioningThere is most likely damage to the harness further up the vehicle. I'd trace the wiring forward to see if there's anything that damaged it. You checked the "ends" of the wiring where the problems normally are (fuses and corrosion), if the problem isn't there it has to be on the wiring between the two. I attached a couple help articles on trailer wiring for you to check out as well.
view full answer... - No Power To Trailer Running Light Pin on Connector for a 2013 Toyota Tundra If you have power entering the running light wire just behind the trailer connector but not transferring though the plug to the running light pin then the trailer connector will need to be replaced for which you will want to use the 7- and 4-Pole Trailer Connector Socket part # HM40975. If you don't have power on the running light wire just behind the trailer connector you most likely have a blown fuse so you need to check the under hood fuse box on your 2013 Toyota Tundra.
view full answer...
- Installing Trailer Connector on 2013 Nissan PathfinderAccording to my research, the 2013 Pathfinder should already have a 7-way trailer connector at the rear. If not, look under the vehicle for the trailer wiring. There should be a wire harness with a US car connector on the end, like what's shown in the provided photo. The connector will probably have a protective cap on the end. The harness you found would plug into the trailer connector, part # HM40975. The connector is not a vehicle-specific item, so you'll need to devise a way of attaching...
view full answer...
- Trailer Wiring Harness for a 2011 Buick Enclave without Factory Installed 7-WayThe replacement 7 and 4-Way trailer connector # HM40975 is designed to replace a factory 7-Way if your 2011 Buick Enclave came with one from the factory. If your Enclave did not come with a factory installed trailer connector and you want to add a 7-Way you would first need to install a 4-Way, # 118450. After the 4-Way is installed to add a 7-Way you would either need adapter # 37185 (if you do not need the electric brake or 12 volt functions to work on the trailer), and plug in the 4-Way...
view full answer... - Trailer Connector fit on 2017 Audi Q7The 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End # HM40975 is confirmed to fit a 2017 Audi Q7 with factory tow package. I've added a link to a video review of this product for you to take a look at.
view full answer... - How to Install Both a 7-Way and a 4-Pole Trailer Connector on 2019 Toyota Highlander LE PlusI can suggest two different options for you. Option 1, you can discard (or save for a spare part) the 7-way included with the # 22119 kit and replace it with the # HM40975 which would plug directly into the harness provided by the # 22119. The # 30955 would also do the same thing, but the # HM40975 is much better built. In fact, it's what GM and Ford and Ram use as the OEM trailer connector on their trucks. Option 2, you could use a T-connector like # 118384 which would plug inline at...
view full answer... - 7-Way Replacement Recommendation for 2015 Chevy Silverado 2500HDFor your 2015 Chevy Silverado 2500 the 7-way kit we offer that fits directly to the cutout in the bumper of the truck is the Hopkins kit part # HM40975. I attached a couple pictures and an install video of this kit installed on a similar truck as yours. The truck shown is a 2015 Silverado 2500 just like yours.
view full answer...
- Recommended 7 to 4-Way Adapter for a 2018 Volkswagen AtlasThe best option we have for you would be to replace the trailer connector on your 2018 Volkswagen Atlas with the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket part # HM40975 which is a plug and play option. The reason that this is the best option for you is because adapters like the Adapter 7 Pole to 4 Pole with Tester and Cover part # 47345 can have different tolerances which is the only reason that I can think of as to why it will not work for you. These types of adapters...
view full answer... - Recommended Trailer Hitch Receiver and 7/4-Way Wiring For a 2021 Jeep Grand Cherokee L I recommend the Curt Trailer Hitch Receiver # C97JR for your 2021 Jeep Grand Cherokee L. This receiver will mount behind the rear fascia and is hidden by the factory cutout when not in use. The Universal Wiring Harness # 22551 will give you a 7-way connector and the wiring needed to make if function. You can replace the included connector for the 7- and 4-Pole Trailer Connector Socket # HM40975. This will give you the option of connecting the 7-way or 4-way connector without needing an...
view full answer... - Why Would Brake Controller Prevent Truck Stop Lights From WorkingWhat do you mean electric break system? Do you mean a trailer brake controller? If so it sounds like you wired the stoplight switch straight to the brake controller instead of just tapping into the circuit. Tapping into it allows the circuit to still work like it is supposed to and then also allow the brake controller to know when to start applying trailer braking power.
view full answer... - Parts Needed to Add Brake Controller to 2012 GMC Canyon With Factory 4-WayYou will need to add a 7-way to install the # 39523 (80500) on the 2012 GMC Canyon. If the 4-way at the back is plugged into a round US Car connector behind the bumper you can add a 7-way using the # HM40975. If it is an aftermarket 4-way, or attached using a different connector, you will have to add a 7-way using the # ETBC7. Since it is a hardwire installation you will also want the Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers - 34" Long # 7894. This will plug...
view full answer... - Troubleshooting Trailer Light Socket Not Working on Truck with Two SocketsHey Aaron, If one of your trailer sockets isn't working correctly but the other one is then that tells me the malfunctioning socket needs to be replaced. I'm not exactly sure what sockets you have on your truck but if it's a combo socket then the Hopkins # HM40975 is a great replacement, or if it's an in-bed 7-Way then the Hopkins Endurance # 41157 is a great option there as well. Checking the fuses can help but with all the functions being active on one plug it won't do you much good....
view full answer... - Troubleshooting New Trailer Tail Lights on Utility Trailer Towed By 2002 Ford F-250If you recently installed new trailer tail lights and you are having trouble with the brake light circuit functioning I suggest checking into the grounding for the lights. Some lights use their mounting posts to make the ground connection; others will use a separate (usually white) wire with a ring terminal; still others may use their hardware to establish ground. Either way, you need a good solid connection to bare metal. Sometimes a weak ground may let one light function work but not...
view full answer... - Troubleshooting Wiring on 2004 Chevy Dually That Activates Trailer Brakes When Hazards Are OnIt sounds like you could have a corrosion issue in either the truck's trailer socket or the trailer's plug. What can happen is that corrosion can build up inside the socket or plug and cause two circuits that are next to each other to become bridged together. If you refer to the linked photo of a 7-way trailer socket you'll see that the brake circuit at the 5-o-clock position is next to the right turn/stop circuit at the 3-o-clock position. Chances are that either the truck socket or the...
view full answer...
- Wiring a 7-Way Trailer Connector and Brake Controller on a 1998 Ford ExpeditionThere are three different ways a brake controller is installed on your Expedition. If your vehicle has a factory 7-Way then all that is needed is a Universal Brake Control Wiring Adapter for Ford, item # 3035-P, or a Ford adapter for the specific brake controller you select (see link). If you have a factory installed 4-Way connector then you will need the above-mentioned items and a Adapter 4 Pole to 7 Pole and 4 Pole, item # 37185, to install the brake controller on your vehicle. The...
view full answer... - Replacement 7-Way Trailer Connector for 2005 GMC Sierra 2500 SeriesThe 7-Way US Replacement Connector, # PK11893, will fit on your 2005 GMC 2500. If your mounting bracket was bent or damaged we carry the Mounting Bracket for 7-Way, # 18138, as well. You might want to consider the OEM Style 7-Way and 4-Way Trailer Connector, # HM40975, which will allow the use of 7-Way and 4-Way wiring with no additional adapters.
view full answer... - Can Both 7- and 4-Way Connectors on # HM40975 be Used at the Same Time7- and 4-Pole Trailer Connector Socket # HM40975 and similar vehicle side trailer connectors are designed so that you can only use one of the connectors at a time. The reason for this is that both connectors share the same circuits for lights and so it would be easy to overload those circuits in some cases. If you are certain that won't happen you would have to take the door off of one side so the 2 doors are not blocking each other.
view full answer... - Replacement 7- and 4-Way Trailer Connector Socket for 2011 Ford F-150The 7-way plug you are referring to on your 2011 Ford F-150 is the same thing as the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975. This will fit as an exact replacement for the factory 7-way on your truck. I have added a link to a video review and install of this connector for you to check out as well.
view full answer... - Adding a 7-Way Trailer Connector to a 2007 Chevy Express Can with Factory Tow PackageIf your 2007 Chevy Express Van came with a factory 7-Way but it is missing and needs to be replaced you can use # HM40975. This connector as a 7-Way and a 4-Way. It has a round receptacle in the back to plug a harness in. The harness on the van would need to look like # PK11998 in order for it to plug into the new connector. Otherwise you would use # PK11998 to hardwire the connector to the van wiring.
view full answer... - Troubleshooting 7-way On 2004 Ford F150 Not Showing Left Turn SignalIf you've tested the 7-way on the vehicle, and have determined that you have no signal on the left turn signal pin, closely examine the trailer connector. Make sure it's not damaged or excessively corroded and clean/replace if necessary. If the trailer connector checks out okay, take a look at the wiring harness that feeds the 7-way, right behind the connector. Find the yellow wire in the harness and use a circuit tester like part # PTW2993 to test the wire as a helper activates the left...
view full answer... - Troubleshooting Haulmark Trailer Right Brake LightSince trailer wiring uses one common circuit for both right-hand brake lights and turn signals it is possible that you have a bad bulb in your light fixture. This is easy to check and the cost to replace a bulb is minimal. If you have a circuit tester like # PTW2993 you can test the connector on the vehicle to see if the correct brake light signal is present there. Have a helper step on the brake pedal while you apply the probe of the grounded tester to the pin for the right brake light....
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Joe B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Matthew B
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Video by:
Andrew K
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
Video by:
David F
Video by:
Aidan B
Video by:
Thomas T
Written by:
Tyler C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
8/3/2023
I am sorry to hear that your order arrived in this condition. I see that our customer service department is currently working on a solution for you.