Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

See what our Experts say about this CURT Custom Fit Vehicle Wiring

• Recommended Trailer Wiring for 2006 Ford F-150
  If you are using the Ford Replacement OEM Tow Package Wiring Harness, 7-Way # 118242 on your 2006 Ford F-150, that is most likely the issue. That harness only is compatible with models up to 2004. For your 2006 F-150, you will either use the 4 way # C56031 to give you a 4-way trailer connection or # 74682 if you are replacing a 7-way connector. If you wish to upgrade from a 4-way to a 7-way, then you will want the Adapter 4-Pole to 7-Pole and 4-Pole # 37185 and after connecting the...
  view full answer...
• Trailer Hitch Recommendation for a 2007 Ford F-150 STX Step Side
  I have a solution for your 2007 Ford F-150 STX as long as it didn't come with a factory hitch, but the # 41004 is for much older trucks and would not be it. The Curt hitch part # C13365 would be a fit and work well on your truck. If you check out the install video I attached you can see on the truck quarter panel that it is an STX model as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch...
  view full answer...
• Hopkins Smart Hitch Backup Camera Compatibility with 7-Way Trailer Connector Without Tow Package
  The Hopkins Smart Hitch Backup Camera and Hitch Aligner System # HM50002 will not plug into the Hopkins Endurance 7-Way Trailer Connector Socket # HM48480 but it will plug into the Endurance Quick-Install 7-Way Trailer Connector with Universal Pigtail Harness # HM47210 or the Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter w/ 4-Way Vehicle End Plug # HM47180. If you don't have any wiring yet, my recommendation is to use the Curt T-Connector Vehicle Wiring Harness with 4-Pole...
  view full answer...
• Parts Needed to Install 7-Way on 2003 Ford F-150 without Trailer Wiring
  You will need to start with a 4-way (if you do not have one). For that you would want the # C56031. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake...
  view full answer...
• 2001 Ford F-150 Trailer Hitch Needed with a 700 lbs Tongue Weight and Fits with Spare Tire
  The Draw-Tite Trailer Hitch Receiver # 37130 is a Class IV trailer hitch with a 2" receiver opening that is confirmed to fit your 2001 Ford F-150 and will allow you to keep your full spare in it's current location. This has a 7,000 lbs Gross Towing Weight (GTW) rating and a 700 lbs Tongue Weight (TW) rating. When used in conjunction with a Weight Distribution (WD) system those ratings are bumped up to 12,000 lbs GTW and 1,200 lbs TW. I have attached the installation details for you to...
  view full answer...
• Brake Controller For 1998 Ford F-150
  The best and most popular brake controller we offer is the Tekonsha Prodigy P2 Trailer Brake Controller, part # 90885. This is a proportional controller and will activate your trailer brakes in proportion to your 1998 Ford F-150 truck's braking action. This system is easy to install and to use. The other items you need for installation depend on the type of wiring you have on your truck. If you have the factory 7-way connector on the rear of your truck then I recommend the Tekonsha Plug-In...
  view full answer...
• Using the Curt Venturer Brake Controller with a 2001 Ford F-150
  To use the Curt Venturer Brake Controller, part # C74VV, with your 2001 Ford F-150, you will need the Custom Wiring Adapter for you vehicle, which is part # C51322. I've linked to a video installation of these two for you to reference. Keep in mind that in order to use a brake controller, you need a 7-way on your vehicle. If you don't have one, then use the etrailer Universal Installation Kit, part # ETBC7. This will hook up to your factory 4-way. I've linked to a video installation of...
  view full answer...
• Recommended Trailer Hitch Receiver for 2005 Ford F-150
  The Draw-Tite Max-Frame Trailer Hitch Receiver # 75156 is an easy bolt on hitch option confirmed to fit your 2005 Ford F-150. The installation requires no drilling and will take someone with basic mechanical ability about 30-40 minutes to install. If you will be adding trailer wiring, the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56031 will connect to the factory wiring harness ports. You can then use the mounting bracket # 18144 along with # 18136. If...
  view full answer...
• Recommendations For Adding A Brake Controller To A 2007 Ford F-150
  Getting a brake controller installed on your 2007 Ford F-150 will require a few things. First will be a 4 Flat like the Curt # C56031, if you do not already have one. This will supply the power to the taillights, but you will also need the Universal Installation Kit for Trailer Brake Controller # ETBC7 for the rest of the needed power and functions. This will piggyback off the 4 Flat and includes the 7 Way, all the needed wiring, circuit breakers, and brackets needed to add a brake controller. There...
  view full answer...
• Recommended LED Tailgate Light Bar Wiring Connection on 2006 Ford F-150
  On your 2006 Ford F-150, if you don't have the factory 7-way then you can use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56031 to run your LED light bar. The factory wiring to connect to is located behind the rear bumper. If you do have the factory 7-way, then I recommend the Reese Replacement Multi-Tow 7-Way & 4 Pole Trailer Connector # 74682 which will give you the 7-way at your bumper and the hidden 4-way to give you a clean light bar connection.
  view full answer...
• Is the Hopkins Plug in Harness # HM40145 Compatible with a 1999 Ford F-150 4x4?
  If you have a factory 4-flat connection on your 1999 Ford F-150 4x4 then the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM40145 will be a confirmed fit. This custom-fit T-connector plugs into your Ford F-150 wiring harness, which is located behind the rear bumper, near the driver's-side frame rail. If you do not have the factory 4-way flat, then you will want the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56031....
  view full answer...
• Replacement Wiring Harness for 2005 Ford F-150 with Factory 4-Pole Trailer Connector
  Thank you for the photo! The Curt T-Connector # C56031 you purchased is the correct replacement wiring harness for your 2005 Ford F-150 without a factory 7-pole connector (only a 4-pole) regardless of the style of connector on the factory harness. The Curt T-Connector # C56031 will actually connect directly into your vehicle taillight wiring harness (bypassing the tow package harness). This harness will have the same connector end as the # C56031. The most common location is underneath...
  view full answer...
  
• Where is the Draw-Tite Hitch for a 2007 Ford F-150 Made
  The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75506 which is a fit for a 2007 Ford F-150 is made in Mexico. If you are looking for a USA option, the Curt Trailer Hitch Receiver part # C13360 is the way to go. If you need a trailer connector to go along with the trailer hitch, the Curt T-Connector Vehicle Wiring Harness part # C56031 is plug-n-play.
  view full answer...
• 2005 Ford F150 Trailer Hitch Recommendation
  For your 2005 Ford F-150 the Curt Hitch part # 13357 has been confirmed to fit your vehicle and is our most popular option so I would recommend it for you. It has been confirmed to fit all models of your vehicle so it would work with your frame setup. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch...
  view full answer...
• Trailer Wiring Recommendation for 2002 Ford F-150 That Does Not have Trailer Wiring
  You will need to start with a 4-way (if you do not have one). For that you would want the # C56031 if you only need a 4-way. Now if your trailer does not have brakes but you do need a 7-way instead all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller. For a brake...
  view full answer...
• Prodigy P2 Brake Controller on a 2006 Ford F-150 without a Wiring Harness
  Yes, the Prodigy P2 Brake Controller, part # 90885, can definitely be installed on your 2006 Ford F-150. I've included a link on how to install this on a 2004 F-150. You need a fully functional 7-Way if your vehicle isn't already equipped with one. To get this, there are two options based on if your F-150 has the factory tow package or not. If it does, then you need the 7-Way harness and Brake Controller Kit from etrailer, part # ETBC7. This kit contains both the wires and connector needed...
  view full answer...
• Recommended Brake Controller And Wiring For 2000 Ford F-150
  You will have the port under the dash to plug in the adapter for a brake controller on your 2000 Ford F-150. I recommend the Tekonsha Primus, part # TK90160. This controller features a digital readout that will alert you to any problem with the braking system rather than a single LED that changes colors. The plug-in adapter for the Primus you need is part # 3035-P. One end simply plugs into the back of the controller and the other end plugs into the port located under the dash. I have...
  view full answer...
• Will Trailer Wiring Harness 20028 Fit a 1998 Ford F-150 without Factory Trailer Connector
  To solve the problem of the dirty connections you can clean them, then use dielectric grease at the connections, # 11755, and then seal everything up using liquid electrical tape, # SWC50122. Another option is to replace the 4-Way you are using with either # C56031 for a non-stepside bed or # C55344 for a stepside bed. These connectors actually plug in line with the tail light wiring so you will not have to use quick splice connectors.
  view full answer...
• Parts Needed to Install Brake Controller on 2006 Ford F-150 without Factory Connector
  If you do not have any factory connector present (4-Way or 7-Way) at the rear of your 2006 Ford F-150, you will just need a couple of items to install the excellent Tekonsha Prodigy P3 Trailer Brake Controller # 90195 that you referenced. First, to install a 4-Way connector, I recommend the Curt T-Connector Vehicle Wiring Harness # C56031. This is custom fit for your truck and will install by simply plugging into existing ports under the vehicle on the driver side. I have attached the...
  view full answer...
• Recommended Brake Controller And Trailer Wiring For 2000 Ford F-150
  There is a brake controller port under your dash near the diagnostic port. I recommend the P3 Brake Controller # 90195. this is one of our most popular brake controllers because it is easy to install and operate. The plug-in adapter for this brake controller is part # 3035-P. If you have a factory 7-way trailer connector at the rear of your truck, no other wiring is needed other than the brake controller and the plug-in adapter. If your truck is not a Flareside and you do not have a...
  view full answer...
• Trailer Hitch Recommendation for 2000 Ford F-150
  For towing a 3,000 lb trailer with your 2000 Ford F-150 the Curt hitch part # C14355 would fit and work well as it's a confirmed fit for your truck and has a 10,000 lb trailer weight capacity as well. For trailer wiring you'd then want the part # C56031 for a 4-way. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes...
  view full answer...
• Can a Ford F-150 Tow a Chevrolet TrailBlazer
  Yes, a 2001 Ford F-150 does have the capacity to safely tow a 2002 Chevrolet TrailBlazer. In order to do so with all four wheels down you will need the following parts: Draw-Tite Max-Frame Trailer Hitch Receiver part # 75740 Curt T-Connector Vehicle Wiring Harness part # C56031 Curt Tow Bar with Adjustable-Width Arms part # C19745 Hopkins Magnetic Tow Lights part # C6304 The above list of parts will be the most cost effective way to safety transport the TrailBlazer behind your F-150.
  view full answer...
  
• Parts Needed to Install a 7-Way on a 2005 Ford F-150
  You would first need to start with a 4-way on your 2005 Ford F-150. For that you would want the part # C56031 which is a confirmed fit. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # 3035-P, the # 37185, and a brake controller. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller...
  view full answer...
• Trailer Hitch Recommendation for a 2005 Ford F-150 FX4
  For your 2005 Ford F-150 FX4 that only has the bumper hitch I recommend Draw-Tite Class II trailer hitch # 41549. It is rated for 600 pounds tongue weight and 6,000 pounds gross trailer weight. When used with weight distribution it is rated for 1,000 pounds tongue weight and 10,000 pounds gross trailer weight (limited to the capacity of the vehicle). I have linked the installation instructions for you. I also recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?