bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Chrysler
  3. Town and Country
  4. 2010
  5. Tekonsha
FITS 2010 Chrysler Town and Country
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118552
Retail:$99.60
Our Price: $73.26
You Save: 26%
Custom Fit Vehicle Wiring
Confirmed to Fit
2010 Chrysler Town and Country

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
Custom Fit Vehicle Wiring 118552 - 4 Flat - Tekonsha
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Chrysler custom fit vehicle wiring experts, and offer a great price. etrailer.com carries a complete line of Tekonsha products for your Chrysler Town and Country 2010. T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part 118552 from Tekonsha can be ordered online at etrailer.com. Complete custom fit vehicle wiring installation instructions and technical support.
  • All Info
  • Reviews (455)
  • Q & A (0)
  • Photos

2010 Chrysler Town and Country - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

  • 4 Flat
  • Trailer Hitch Wiring
  • Tekonsha
  • Powered Converter

Quickly and easily install a 4-way trailer connector on your Chrysler Town and Country with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points behind tail lights
    • Plug in T-connector
    • Run hot lead to car battery
  • Includes ModuLite power module that connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 4.2 amps per circuit
    • Tail lights: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.


T-One Connection Location Points Behind Tail Lights

Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.


Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


ModuLite Power Module

A ModuLite power module is built into this T-One connector. With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.



118552 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

Installation Details 118552 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118552

Average Customer Rating:  4.8 out of 5 stars   (455 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.

by:

Installation was quite simple. Saved many $$$ doing it myself.

Donald

12/14/2023

Works great. The installation was easy, the instructions were excellent and easy to follow.



by:
2009 Jeep Patriot

Great product, the connectors make it easy to set up your trailer lighting configuration. The video is helpful as well. I will say this, though - avoid the part about running the wire all the way to your battery if at all possible. This is totally unnecessary (and a lot more work) if you have a lead wire available inside the rear of your left taillight like I discovered through other sources of information in my install process. Just connected the black wire provided (without the extension cord) to this lead wire behind the taillight and I was good to go. Saved me a lot of hassle trying to string a wire throughout my entire vehicle and into the area under the hood.



by:
2016 Jeep Patriot

Fast shipping. The youtube videos are also a huge help.



by:

Easily installed. Actually my wife and her friend installed the hitch and wiring. I installed the adapter wiring and attached to the hitch. Seems like a great product.



by:
Dodge Dakota

Wow, starting with my order on Tuesday I had excellent customer service, then a short 2 days (really?) later I recieved my Rola cargo carrier and light kit. Your videos make it easy to assemble and install. Prices are cheaper than anywhere on the net. Attached are some pics but it is snowing buckets in South Dakota right now, glad when we get to sunny Orlando, thanks etrailer!!!



by:

Just got done installing my hitch and wiring very easy looks great I sent along a picture to show how nice it looks!
Thanks etrailer



by:
2014 Jeep Patriot

Just finished the install of this unit on my 2014 patriot and it couldn’t have been easier. I’ve used other models in the past on another patriot that involved wire splices and poor instructions and installation took forever. Not the case this time. The installation video specific to my vehicle provided on etrailer’s website was dead on and incredibly helpful. Overall great experience both with the product and company.



by:
2009 Dodge Grand Caravan

Waited almost a month..harness is good



by:
Jeep Cherokee

Around a year ago my grandson and I installed this wiring harness on his Jeep Cherokee. It was pretty easy to install, and is still working great. I would recommend this product.



by:
2008 Dodge Grand Caravan

This product is amazing! I have a 2008 Dodge Grand Caravan. Install was a breeze, and the installation videos are tremendously helpful. I’m looking forward to seeing what else I can get.



by:
2013 Dodge Durango

Received the product in perfect shape, very easy installation with the video. I'm very satisfied with this product and definitely recommend it to anybody.



by:

We got the trailer hitch on time



by:
2010 Dodge Grand Caravan

Exactly what I needed. The longest part of the install was running the wire to the battery. I ran it with the brake lines and zip tied it to them with the supplied zip ties.



by:

There probably isn't anything wrong with the harness, but couldn't install it because it wasn't the right model.

etrailer recommended this harness for me 2012 Town & Country, but when I got around to installing it, I found that it was for a 2010 model and wouldn't work on my 2012 model. I was passed the 60 days to return, they refused to let me exchange it for the proper one. I felt that since it was the harness they recommended that they should make it right, but etrailer chose not to do the right thing. So I sit with a harness that is useless to me. I wouldn't buy anything from etrailer ever again....I don't trust them anymore!!

Etrailer Expert

Brooke M.

9/30/2022

Thank you for bringing this to our attention. I have sent your information to our customer service team and they will be in touch with you about this.



by:

You folks are a great company keep up the great work!



by:
2016 Dodge Grand Caravan

I installed this on a 2010 Dodge Grand Caravan SXT. Product was easy to install. I followed the directions that came with the kit and watched the install video. I ran the power wire to the battery under the van along the brake line and used zip ties to hold it in place. I traded the van in since then, but it worked up until the day I traded it in. We bought a 2016 this past February and I order the same kit (updated for 2016 as it is not the same as the old kit. Different connectors to the tail lights.), but this time routed the battery wire inside the van through the space for the jack and ran it under the carpet and out of the firewall through the same place the cable for the brake pedal comes in. way easier than crawling under the van.

Joe

5/23/2017

One year later and it still works like a champ. Next time I need a harness I will be buying my 3rd one from etrailer.



by:

Easy instillation videos from etrailer were a great help I recommend etrailer for anything trailer related



by:
2010 Dodge Grand Caravan

Very pleased with this product! Received it in just a few days, good directions and easy to install. I could have installed it in about an hour and a half but it took me three hours. That's because I ran the green wire to the right side of the car on the inside of the car on the inside of the car under the carpet and trim and the the same with the power wire to the battery and out through the firewall rather than under the car as suggested for better protection, so it took longer.i did run the trailer plug under the car as suggested but I put it in wire loom to protect the wire from chafing and the elements. It took longer to install that way but should provide many years of service especially here in New England with all the salt and snow that deteriate wires in a short amount of time. Thank you E-Trailer!!

Brian L.

8/22/2018

This product is still working great for me, have had absolutely no problems, I believe largely due to the fact that I took the extra time to install the wires on the inside of the car as well as using wire loom to help protect it from the elements. Would do it again in a heartbeat! Thank you etrailer from a satisfied customer!



by:
2016 Jeep Patriot

Awesome wireing kit ,easy to install



by:

I remember what was involved in this job before these harnesses. This is a wonderful solution. Very easy to follow instructions make for an easy professional installation. A little patience when running the power wire goes a long way. The factory connections ensure reliable, maintenance free operation. I like the loop on the flat 4 connector that secures to the safety chain loop to secure the connector when not in/not in use. The only shortfall is that there aren't enough zip ties included to properly secure the power wire when routing it to the battery. I would recommend this product if you want a one-and-done trailer lighting solution.

Zeb

6/8/2020

After using these harnesses on two vehicles for over a year on one, and two years on the other, both in a northern climate Ive experienced no issues what-so-ever. Im very satisfied.



by:

Simple, quick and straight forward installation.



by:

The harness I bought was incredibly easy to install. I’m not using it until 3/28 (today is 3/16) so I can’t speak to how it works yet. I may stop by the rental trailer place just to check it out. There were two small issues. The directions called for a wire to be ran from the battery to a red wire on the black box. It’s a black wire on the box. There is no red wire. The other issue was the zip ties could’ve been 3” longer. I had to use 2 together because the only thing to tie to was my hitch. I called etrailer about the wire issue and the lady was very friendly and helpful. I’d definitely buy it again.

Ronald

3/16/2019

Perfect



by:

lights are still working well, i remember the directions being a little fuzzy on which side is which and i ended up putting them on wrong sides, BUT i cut the end off and wired it into a six round with a four/five flat plug, so all i had to do was reverse when i spliced and it turned out fine! Less satisfied with the mounting bracket provided with my six round four/five flat plug, cheap and easily bent. Also the four flat corroded nice and fast with the salt up here in northern WI (even with the cover) as well as the springs for the cover for the six round.

Dan A.

6/20/2020

with application of wd 40 the corrosion has been held in check and the lights are all still working, the mounting bracket has held up, too



by:
2015 Jeep Patriot

My order was received promptly and complete, as always from etrailer!

Your installation videos are always helpful and accurate.

The one suggestion I have concerning this product is that the battery lead coming out of controller should be longer. The controller is generally installed before the lead is crimped to the battery connection. Once the controller is installed, it is challenging to reach the lead to attach the battery power wire because of very limited working space. Just a thought.

Installed as instructed and tests as desired.

Gary

12/21/2021

Installed easily, as outlined in your excellent video.



by:
2010 Dodge Grand Caravan

The install of this wiring harness was very easy. It came with all necessary parts, well except terminal crimpers and wire strippers, but I had those already. I ended up running the power wire from the battery along the brake lines to the rear of the van.

I was a little surprised that the wiring module is mounted on the exterior underneath the vehicle, but given Chrysler's design, I don't really see a better option. So far it has given me no problems. It's nice to have a second tow vehicle.

Brian C.

6/27/2017

The harness still works great, no issues so far.


25
455
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Wiring Harnesses Needed to Wire a Brake Controller from Scratch in a 2010 Dodge Grand Caravan
    In addition to the brake controller, you will need two other wiring harnesses to complete installation on your 2010 Grand Caravan. First is the Brake Controller 7 and 4 Way Installation Kit, # ETBC7. Second is the Tow Ready Custom Fit Vehicle Wiring, # 118446. I have included a video showing installation of the ETBC7 and instruction for the 118552. Installation may seem daunting but it is not too difficult if your are fairly handy with automotive projects and/or electrical wiring. I have...
    view full answer...
  • What all is Needed for a 2010 Dodge Grand Caravan SE to Tow a Coleman Pop-Up Camper?
    I can definitely get you some recommendations for what will be needed to tow a camper with your 2010 Dodge Grand Caravan. I did include all the needed parts to do this, but please keep in mind that the ball mount and ball are examples and the correct ones will depend on the camper you end up choosing. With that out of the way, let's get started. The etrailer.com Custom Class III Hitch # e98854 will bolt directly to your vehicle without the need to drill, making the install quick and straight...
    view full answer...
  • Recommended T-One 4-Pole Wiring Harness for 2011 Dodge Durango Without Factory Tow Package
    For your 2011 Dodge Durango without factory tow package I recommend the T-One Wiring Harness # 118552 from Tekonsha. This 4-pole wiring kit includes a powered converter which acts like a safety switch to protect the internal wiring inside the truck in the event of a bad short or other wiring fault on the connected trailer. It is a lot less costly to replace a trailer harness kit than the internal wiring in your Durango. This Tekonsha kit installs mostly by just plugging in connectors...
    view full answer...
  • Towing Package Recommendation for a 2010 Jeep Patriot Latitude Edition
    The Draw-Tite Trailer Hitch that you referenced is confirmed as a fit for your 2010 Jeep Patriot Latitude Edition. This is a Class III hitch that is rated for up to 3,500 pounds of towing capacity. Please check the towing capacity limitation of your Jeep Patriot, and compare to the weight of your snowmobile trailer loaded and make sure that you do not exceed the lowest rated component within the towing system. Some times the vehicle tow rating is the lowest rated component and can be...
    view full answer...
  • Distance from hitch Pin Hole Center to Ball Hole Center on Ball Mount # AMSC10
    I went out to the warehouse and pulled a Cushioned Ball Mount, # AMSC10, to measure. From the center of the hitch pin hole to the center of the ball hole measures 11-1/2 inches. I have included a link to our FAQ article on choosing the correct ball mount for you to view. The Draw-Tite Trailer Hitch, # 75579, is the most popular model for a 2008 Dodge Grand Caravan. I have included a link to the installation details and a link to a video showing a typical installation for you to view. For...
    view full answer...
    Image 1 for
  • Troubleshooting a Tow-Ready Wiring Harness # 118552 on a 2009 Chrysler Town and Country
    It sounds like you have narrowed the problem down to your 2009 Chrysler Town and Country. I would check all of the connections that you made when you initially installed this Tow Ready Wiring, part # 118552, and look for any loose, melted or otherwise damaged wires and repair as necessary. If it appears to be wired correctly, I would use a Circuit Tester # PTW2993 and test the wires that you attached to the box for voltage when the appropriate circuit is in use. If you find that the...
    view full answer...
  • Recommendation for 2 Inch Trailer Hitch Receiver on 2008 Chrysler Town and Country Stow and Go
    I recommend the Curt Class III Receiver Hitch, # 13364, for your 2008 Chrysler Town and Country Stow and Go. This 2 inch hitch has a maximum trailer weight capacity of 4,000 pounds and tongue weight capacity of 400 pounds and mounts directly to the frame with no welding required. If you plan to tow and need wiring to operate lights on a trailer, the Tekonsha Wiring Harness, # 118552, can be plugged directly into your vehicle's factory connectors with no cutting or splicing needed. We...
    view full answer...
  • Trailer Wiring Kit Recommendation for 2008 Dodge Grand Caravan thats More Reliable than Curt
    Sounds like there's a short on the right stop/turn circuit of your trailer which is causing the trailer wiring harness to stop working like it needs to. This is almost always the issue when a specific function of trailer wiring keeps failing. So what I recommend is that you go over the trailer wiring looking for any obvious shorts like cut or frayed wire and fix as needed and then install the Tekonsha kit part # 118552 on your 2008 Dodge Grand Caravan instead as this kit will be much more...
    view full answer...
  • How to Install Prodigy P2 Brake Controller # 90885 in 2013 Dodge Durango Without Under-Dash Port
    If your 2013 Dodge Durango lacks a 7-way trailer connector and the under-dash connection port for a brake controller (which would allow you to use the quick-connect harness # 3045-P) you can still do a hard-wired installation. To do this you can use our # ETBC7, which is a complete brake controller installation kit that includes a 7-way connector, wiring, circuit breakers, connectors and circuit tester. If your Durango does not have a 4-pole trailer connector already you will also need...
    view full answer...
    Image 1 for
  • Recommended Parts Needed for a Towing Setup on a 2010 Chrysler Town and Country
    For a complete towing setup for your 2010 Chrysler Town and Country I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver # 75579 which is a Class III hitch with a 2 inch receiver opening. To install wiring I highly recommend the Tekonsha T-One # 118552 because the Tekonsha line of electronics have proven to be very reliable. You will also need a ball mount and hitch ball to complete your setup. I have attached a helpful article that demonstrates how to select the correct...
    view full answer...
  • Size of Included Fuse for T-One Vehicle Wiring Harness # 118552
    The fuse that goes in to the fuse holder of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118552 that you referenced is a 10 amp fuse.
    view full answer...
  • Trailer Hitch Recommendation for a Bike Rack on a 2017 Jeep Patriot
    I recommend using the etrailer Trailer Hitch Receiver # e98836 for your 2017 Jeep Patriot because it gives you a 2" hitch receiver which means you have access to a wider variety of accessories (like bike racks) plus it has a matte black finish which looks more rugged and actually hides dents and scratches from road debris much better than the classic glossy black finish that comes on other hitches. If you don't already have a bike rack then I recommend going with the Thule Camber # TH9058....
    view full answer...
  • Equipping 2008 Chrysler Town and Country for Towing 2200 lb Pop-Up Camper
    As a first step, I'd recommend definitively finding out the tow capacity of your Town and Country. The 1800 lb capacity sounds about right. The owners manual states that vehicles equipped with the 'trailer tow package' can handle up to 3800 lbs (with only two people in the vehicle). The trailer tow package almost certainly includes a transmission cooler, but there might very well be other upgrades like different gearing or suspension modifications that provide the increased towing capacity....
    view full answer...
  • Where Is The Factory Trailer Brake Controller Port In A 2011 Dodge Durango?
    The factory trailer brake controller port in your 2011 Dodge Durango will be located underneath the dash near the emergency brake pedal, but can be pretty hard to find. If you take a look at the 4:22 minute mark of the included video of the Tekonsha Prodigy P2 # 90885 with plug-in adapter # TK93VR being installed you will see where we have found the connector on a similar 2013 Dodge Durango. Keep in mind this port will only be there if your vehicle has the factory 7-way connector. If...
    view full answer...
  • Ball Mount, Trailer Hitch, and Trailer Wiring Recommendations for 2008 Dodge Grand Caravan
    The Draw-Tite Class II Trailer Hitch Receiver, # 36455, requires the drawbar be used in the rise position. Another option would be to go with a different hitch and draw bar. I recommend going with a higher capacity hitch with a 2 inch receiver opening. With a 2 inch opening, you will have more gross trailer weight capacity, more tongue weight capacity, and more options for accessories like bike racks and cargo carriers, and you will be able to use a drawbar in the drop position. I recommend...
    view full answer...
  • Transmission and Power Steering Coolers for 2015 Jeep Patriot
    The 2015 Jeep Patriot with either 2.0L or 2.4L engine does have a towing capacity of 1000-lbs; the 2.4L models with the Trailer Tow Prep Package (AHC) or the Freedom Drive II Off Road Package (AWL) can tow up to 2000-lbs trailer weight. You can see these towing specs in the page from the owner's manual (page 179) that I linked for you. Towing capacity for any vehicle is determined by the auto maker and adding aftermarket products does not increase it. Installing a hitch with a higher rating,...
    view full answer...
    Image 1 for
  • Does Curt Class III Trailer Hitch Fit Stow and Go Version of 2009 Dodge Grand Caravan
    The Curt Trailer Hitch Receiver, Class III # 13364 is confirmed to fit All Models of the 2009 Dodge Grand Caravan, including the models with Stow 'N Go Seating. The written installation instructions and an installation video of this hitch are linked to this page for you. It is important to note that per Curt's warranty, a stabilization strap # 18050 is required for all non-trailer loads, such as bike racks and cargo carriers, used on the # 13364 trailer hitch. The Draw-Tite Class III...
    view full answer...
  • What Brake Controller Wiring Adapter is Required for a 2013 Dodge Durango
    If your 2013 Dodge Durango came with a factory installed 7-way trailer connector, then you can use the Tekonsha Brake Control Wiring Adapter, # TK93VR, to connect the Primus IQ Brake Controller, # TK90160. The factor brake controller port on your Durango should be located to the left of the emergency brake pedal taped to another harness. I have attached installation instructions for you to check out. If your Durango does not have the factory 7-way trailer connector, then you will not...
    view full answer...
  • Effects of a Vehicle Wiring Kit and 2008 Dodge Grand Caravans Battery When Idle for 6 Months
    The ModuLite in the custom fit vehicle wiring kit # 118552 is designed to draw it's power from the battery. As a result, it bypasses the electrical routes that are used by the wiring harness. I spoke with our technical representative at Tow Ready about your vehicle sitting for 6 months. As long as you have a good battery and the wiring is properly sealed everything should be just fine. It may draw a little power from the battery but the ModuLite does a good job protecting your vehicles...
    view full answer...
  • Trailer Left Side Tail Light Stays Lit Up Bright All the Time
    It sounds like there is a short that is drawing power to the driver side tail light. Since harness # 118552 is a powered harness and is connected the the vehicle battery a short would draw power even with the vehicle off. The first thing you are going to want to do is disconnect the trailer from the vehicle to isolate the location of the issue. Start on the vehicle side by testing the converter. To test the converter use a circuit tester like # PTW2979. You will test the wires going in...
    view full answer...
  • Is Bumper or Fascia Trimming Required for Draw-Tite # 75713 Installation on a 2011 Dodge Durango
    No, the installation instructions, see link, for the Draw-Tite Trailer Hitch, # 75713, indicate that no trimming is needed for installation of the hitch on the 2011 Dodge Durango. There is a note that states that there may be some excess body sealer, caulk, that may need to be trimmed so the hitch will sit flush under the vehicle. Some items you may need to complete your towing setup are listed below. etrailer.com Ball Mount Kit, # 989899 Trailer Wiring Harness, # 118552
    view full answer...
  • Is The Vehicle Wiring Harness, # 118552, Needed On a 2010 Dodge Grand Caravan WithTow Package
    If your 2010 Dodge Caravan already has a factory 4-Way trailer connector on the rear of your vehicle then the T-One Vehicle Wiring Harness, # 118552, is not needed, unless you are having problems with the factory connector. If you do not have the factory 4-Way on your vehicle, then you would use the T-One Vehicle Wiring Harness, # 118552. It will provide the 4-Pole trailer connector that your 2010 Dodge Grand Caravan would need. We have installed many of the T-One Vehicle Wiring Harnesses...
    view full answer...
  • Trailer Wiring Recommendation for 2015 Jeep Patriot
    We have custom fit trailer wiring harnesses for your 2015 Jeep Patriot that will make installing trailer wiring much easier than trying to hardwire a connector. You shouldn't try to hardwire a 4-way directly to your vehicle's wiring too as it can't handle the amperage draw of trailer wiring. The kits we offer like the part # 118552 actually draw power from the vehicle battery to prevent damaging the taillight circuits. This kit installs by plugging inline with your taillight connectors...
    view full answer...
  • Trailer Wiring Harness That Fits 2009 Dodge Grand Caravan
    We do have a trailer wiring harness that is a fit for a 2009 Dodge Grand Caravan, but it is different than the part you mentioned. The correct fit for a trailer wiring harness for an '09 Grand Caravan is: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118552 I confirmed this is a fit with the manufacturer for you and added a link to a video showing an install on a similar year Grand Caravan that you can use as a guide. If you need a hitch I recommend the etrailer...
    view full answer...


< Previous
123. . .7



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Randy B
Test Fit:
Randy B
Employee Joe B
Test Fit:
Joe B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B
Employee Alan C
Video by:
Alan C
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.